Characterisation of ambient atmospheric aerosols using accelerator-based techniques
Atmospheric haze, which builds up over South Africa including our study areas, Cape Town and the Mpumalanga Highveld under calm weather conditions, causes public concern. The scope of this study was to determine the concentration and composition of atmospheric aerosol at Khayelitsha (an urban site i...
Main Author: | |
---|---|
Format: | Others |
Language: | en |
Published: |
2010
|
Subjects: | |
Online Access: | http://hdl.handle.net/10539/7993 |
id |
ndltd-netd.ac.za-oai-union.ndltd.org-wits-oai-wiredspace.wits.ac.za-10539-7993 |
---|---|
record_format |
oai_dc |
spelling |
ndltd-netd.ac.za-oai-union.ndltd.org-wits-oai-wiredspace.wits.ac.za-10539-79932019-05-11T03:42:05Z Characterisation of ambient atmospheric aerosols using accelerator-based techniques Sekonya, Kamela Godwin atmospheric aerosols particulate matter partisol-plus sampler E-sampler proton induced x-ray emission enrichment factor sources of atmospheric aerosol emissions source apportionment by unique ratios Atmospheric haze, which builds up over South Africa including our study areas, Cape Town and the Mpumalanga Highveld under calm weather conditions, causes public concern. The scope of this study was to determine the concentration and composition of atmospheric aerosol at Khayelitsha (an urban site in the Western Cape) and Ferrobank (an industrial site in Witbank, Mpumalanga). Particulate matter was collected in Khayelitsha from 18 May 2007 to 20 July 2007 (i.e. 20 samples) using a Partisol-plus sampler and a Tapered Element Oscillating Microbalance (TEOM) sampler. Sampling took place at Ferrobank from 07 February 2008 to 11 March 2008 (6 samples) using a Partisol-plus sampler and an E-sampler. The gravimetric mass of each exposed sample was determined from pre- and post-sampling weighing. The elemental composition of the particulate matter was determined for 16 elements at Khayelitsha using Proton Induced X-ray Emission (PIXE). The concentration of the elements Al, Si, S, Cl, K, Ca, Ti, Cr, Mn, Fe, Cu, Zn, As, Br, Sn, and Pb was determined by analysing the PIXE spectra obtained. In similar manner, the elemental composition of the particulate matter was determined for 15 elements at Ferrobank (Al, Si, S, Cl, K, Ca, Ti, Cr, Mn, Fe, Cu, Zn, As, Br and Pb). The average aerosol mass concentrations for different days at the Khayelitsha site were found to vary between 8.5 μg/m3 and 124.38 μg/m3. At the Khayelitsha site on three occasions during the sampling campaign the average aerosol mass concentrations exceeded the current South African air quality standard of 75 μg/m3 over 24 h. At the Ferrobank site, there are no single days that exceeded the limit of the South African air quality standard during the sampling campaign. Enrichment factors for each element of the particles sampled with an aerodynamic diameter of less than 10 μm (PM10) samples have been calculated in order to identify their possible sources. The analysis yielded five potential sources of PM10 : soil dust, sea salt, gasoline emissions, domestic wood and coal combustion. Interestingly, enrichment factor values for the Khayelitsha samples show that sea salt constitutes a major source of emissions, while Ferrobank samples, the source apportionment by unique ratios (SPUR) indicate soil dust and coal emission are the major sources of pollution. The source apportionment at Khayelitsha shows that sea salt and biomass burning are major source of air pollution. 2010-04-15T14:05:28Z 2010-04-15T14:05:28Z 2010-04-15T14:05:28Z Thesis http://hdl.handle.net/10539/7993 en application/pdf |
collection |
NDLTD |
language |
en |
format |
Others
|
sources |
NDLTD |
topic |
atmospheric aerosols particulate matter partisol-plus sampler E-sampler proton induced x-ray emission enrichment factor sources of atmospheric aerosol emissions source apportionment by unique ratios |
spellingShingle |
atmospheric aerosols particulate matter partisol-plus sampler E-sampler proton induced x-ray emission enrichment factor sources of atmospheric aerosol emissions source apportionment by unique ratios Sekonya, Kamela Godwin Characterisation of ambient atmospheric aerosols using accelerator-based techniques |
description |
Atmospheric haze, which builds up over South Africa including our study areas, Cape Town and the Mpumalanga Highveld under calm weather conditions, causes public concern. The scope of this study was to determine the concentration and composition of atmospheric aerosol at Khayelitsha (an urban site in the Western Cape) and Ferrobank (an industrial site in Witbank, Mpumalanga). Particulate matter was collected in Khayelitsha from 18 May 2007 to 20 July 2007 (i.e. 20 samples) using a Partisol-plus sampler and a Tapered Element Oscillating Microbalance (TEOM) sampler. Sampling took place at Ferrobank from 07 February 2008 to 11 March 2008 (6 samples) using a Partisol-plus sampler and an E-sampler. The gravimetric mass of each exposed sample was determined from pre- and post-sampling weighing. The elemental composition of the particulate matter was determined for 16 elements at Khayelitsha using Proton Induced X-ray Emission (PIXE). The concentration of the elements Al, Si, S, Cl, K, Ca, Ti, Cr, Mn, Fe, Cu, Zn, As, Br, Sn, and Pb was determined by analysing the PIXE spectra obtained. In similar manner, the elemental composition of the particulate matter was determined for 15 elements at Ferrobank (Al, Si, S, Cl, K, Ca, Ti, Cr, Mn, Fe, Cu, Zn, As, Br and Pb). The average aerosol mass concentrations for different days at the Khayelitsha site were found to vary between 8.5 μg/m3 and 124.38 μg/m3. At the Khayelitsha site on three occasions during the sampling campaign the average aerosol mass concentrations exceeded the current South African air quality standard of 75 μg/m3 over 24 h. At the Ferrobank site, there are no single days that exceeded the limit of the South African air quality standard during the sampling campaign.
Enrichment factors for each element of the particles sampled with an aerodynamic diameter of less than 10 μm (PM10) samples have been calculated in order to identify their possible sources. The analysis yielded five potential sources of PM10 : soil dust, sea salt, gasoline emissions, domestic wood and coal combustion. Interestingly, enrichment factor values for the Khayelitsha samples show that sea salt constitutes a major source of emissions, while Ferrobank samples, the source apportionment by unique ratios (SPUR) indicate soil dust and coal emission are the major sources of pollution. The source apportionment at Khayelitsha shows that sea salt and biomass burning are major source of air pollution. |
author |
Sekonya, Kamela Godwin |
author_facet |
Sekonya, Kamela Godwin |
author_sort |
Sekonya, Kamela Godwin |
title |
Characterisation of ambient atmospheric aerosols using accelerator-based techniques |
title_short |
Characterisation of ambient atmospheric aerosols using accelerator-based techniques |
title_full |
Characterisation of ambient atmospheric aerosols using accelerator-based techniques |
title_fullStr |
Characterisation of ambient atmospheric aerosols using accelerator-based techniques |
title_full_unstemmed |
Characterisation of ambient atmospheric aerosols using accelerator-based techniques |
title_sort |
characterisation of ambient atmospheric aerosols using accelerator-based techniques |
publishDate |
2010 |
url |
http://hdl.handle.net/10539/7993 |
work_keys_str_mv |
AT sekonyakamelagodwin characterisationofambientatmosphericaerosolsusingacceleratorbasedtechniques |
_version_ |
1719085241932447744 |