Mechanical properties and compostability of injection-moulded biodegradable compositions

Mechanical properties and compostability of injection-moulded biodegradable compositions

Please read the abstract in the dissertation. === Dissertation (MSc)--University of Pretoria, 2009. === Chemical Engineering === unrestricted

Bibliographic Details
Main Author:	Burns, Mara Georgieva
Other Authors:	Prof W W Focke
Published:	2013
Subjects:	Compostability Injection moulding Starch Urea Seedling tubes Golf tees Biodegradability UCTD
Online Access:	http://hdl.handle.net/2263/24150 http://upetd.up.ac.za/thesis/available/etd-01192009-093817/

Similar Items

Examination of injection moulded thermoplastic maize starch
Published: (2007-12-01)

Pine Resin Derivatives as Sustainable Additives to Improve the Mechanical and Thermal Properties of Injected Moulded Thermoplastic Starch
by: Miguel Aldas, et al.
Published: (2020-04-01)

Comparison of injection moulding machine performance.
by: Kelly, Adrian L., et al.
Published: (2009)

Optimisation of Mould Design for Injection Moulding – Numerical Approach
by: Damir Godec*, et al.
Published: (2021-01-01)

Influence of Home Composting on Tensile Properties of Commercial Biodegradable Plastic Films
by: Maja Rujnić Havstad, et al.
Published: (2021-08-01)

Rheological and thermal analysis of the filling stage of injection moulding
by: A. Szucs, et al.
Published: (2012-08-01)

Influential Factors that Contribute to Black Golfers’ Participation at the Elite-Level
by: Anthony C. Rosselli, et al.
Published: (2017-09-01)

Visual analysis and diagnosis system for injection moulded components
by: Marsh, Robert
Published: (2002)

Injection moulded polycarbonate covers of rocket launcher tubes
by: Radulović Jovan, et al.
Published: (2014-01-01)

Effect of starch types on properties of biodegradable polymer based on thermoplastic starch process by injection molding technique
by: Yossathorn Tanetrungroj, et al.
Published: (2015-04-01)

Biodegradable materials as foundry moulding sands binders
by: K. Major - Gabryś
Published: (2015-07-01)

Real-time diagnostics of gas/water assisted injection moulding using integrated ultrasonic sensors
by: Mulvaney-Johnson, Leigh, et al.
Published: (2008)

Powder injection moulding technology: Properties, possibilities and starting activities
by: Radulović Jovan
Published: (2015-01-01)

Rapid heating injection moulding: An experimental surface temperature study
by: R. Sánchez, et al.
Published: (2021-01-01)

Development and characterisation of injection moulded, all-polypropylene composites
by: A. Kmetty, et al.
Published: (2013-02-01)

Biodegradation Behaviour of Thermoplastic Starch Films Derived from Tacca leontopetaloides Starch under Controlled Composting Condition
by: Ku Hamid, K.H, et al.
Published: (2018)

The challenges of titanium metal injection moulding
by: Benson, J.M., et al.
Published: (2015)

Additive Manufacturing of Polymer Moulds for Small-Batch Injection Moulding
by: Damir Godec*, et al.
Published: (2020-01-01)

A study of binder removal from powder injection moulded aluminium bodies
by: Pinwill, Ian E.
Published: (1990)

Chopped basalt fibres: A new perspective in reinforcing poly(lactic acid) to produce injection moulded engineering composites from renewable and natural resources
by: P. Tamas, et al.
Published: (2013-02-01)

Biodegradable and Compostable Plastics: A Critical Perspective on the Dawn of their Global Adoption
by: Dr. Rosaria Ciriminna, et al.
Published: (2020-01-01)

Utilization of Optimization of Internal Topology in Manufacturing of Injection Moulds by the DMLS Technology
by: Tomas Coranic, et al.
Published: (2021-12-01)

Investigation of the impact of conformal cooling on the performance of injection moulds for the packaging industry
by: Dimitrov, D., et al.
Published: (2015)

A critical review of literature on cooling of injection moulds
by: Ngonda, T.N.
Published: (2015)

Injection Mould Design and Analysis of the Telephone Base Based on Pro/E
by: Kong Wen, et al.
Published: (2015-01-01)

Microstructure of injection moulding machine mould clamping mechanism: design and motion simulation
by: Zhiming Jin, et al.
Published: (2019-03-01)

The mould for production of plastic spout cap with internal thread by injection moulding
by: Bulej Vladimír, et al.
Published: (2018-01-01)

The production of mouldings adhering closely to the cavity geometry
by: Patching, Michael
Published: (1994)

Biodegradable materials as binders for IVth generation moulding sands
by: K. Major-Gabry
Published: (2015-09-01)

Adaptive process control for stabilizing the production process in injection moulding machines
by: Schiffers, Reinhard, et al.
Published: (2016)

Biodegradable plastics from linier low-density polyethylene and polysaccharide: The influence of polysaccharide and acetic acid
by: Dwi Wahini Nurhajati, et al.
Published: (2019-06-01)

Effects of Mould Temperature on Rice Bran-Based Bioplastics Obtained by Injection Moulding
by: María Alonso-González, et al.
Published: (2021-01-01)

The Use of Particulate Injection Moulding for Fabrication of Sports and Leisure Equipment from Titanium Metals
by: Paul D. Ewart
Published: (2018-02-01)

Repeated research of biodegradability of plastics materials in real composting conditions
by: Dana Adamcová, et al.
Published: (2013-01-01)

Biodegradable and Compostable Products – Essential Components for the Development of a Sustainable Bioeconomy
by: Gabriela-Iuliana Paraschiv (Ganea), et al.
Published: (2020-01-01)

On the performance of a viscoelastic constitutive model for micro injection moulding simulations
by: G. Lucchetta, et al.
Published: (2012-05-01)

HOW DO DEGRADABLE/BIODEGRADABLE PLASTIC MATERIALS DECOMPOSE IN HOME COMPOSTING ENVIRONMENT?
by: Magdalena Vaverková, et al.
Published: (2014-10-01)

Processing and properties of moulded alumina bodies
by: Nogueira, Ricardo Emilio Ferreira Quevedo
Published: (1992)

Determinant morphological features of flax plant products and their contribution in injection moulded composite reinforcement
by: Lucile Nuez, et al.
Published: (2020-11-01)

INFLUENCE OF REGRIND ON PROPERTIES OF PLASTICS PRODUCED BY INJECTION MOULDING
by: Ľudmila Dulebová, et al.
Published: (2011-07-01)

Cannot write session to /tmp/vufind_sessions/sess_nao62qevhefb5ansui2u1rfd5g