Modelling of dragline dynamics

Modelling of dragline dynamics

Thesis (MEng) -- Stellenbosch University, 2000. === ENGLISH ABSTRACT: The utilisation ofDraglines to remove overburden in surface mining operations is often the process that determines the output of these operations. The bucket and its rigging have been identified as important components where de...

Full description

Bibliographic Details
Main Author:	Crous, Pieter Gobregts
Other Authors:	Els, D. N. J.
Format:	Others
Language:	en_ZA
Published:	Stellenbosch : Stellenbosch University 2012
Subjects:	Draglines Buckets (Excavating machinery) Strip mining Dissertations > Mechanical engineering Theses > Mechanical engineering Mining engineering > Technological innovations
Online Access:	http://hdl.handle.net/10019.1/51833

Similar Items

The influence of geometry on dragline bucket filling performance
by: Esterhuyse, Schalk Willem Petrus
Published: (2012)

Creation, optimization and verification of a three dimensional numerical model to simulate a dragline bucket during the digging cycle using modern DEM software
by: Dymond, Graeme Francois Dryden
Published: (2008)

Bucyrus Erie 1570w dragline - analysis of the upper main suspension system
by: Brown, Neil
Published: (2015)

Improving productivity of dragline through enhancem ent of reliability, inherent availability and maintainability
by: Mousa Mohammadi, et al.
Published: (2016-04-01)

Improved estimation of open pit excavator capacity
by: ZHARIKOV S. N.
Published: (2018-02-01)

Reducing the total cost of ownership of mining haul trucks
by: Riley, Lennard Barry
Published: (2012)

Calculation the capacity of bucket wheel excavator the selective mining of overburden
by: Ilić Saša
Published: (2020-01-01)

Dynamic capacity balance between stripping and mining of a dragline stripping system
by: Shuangshuang Xiao, et al.
Published: (2020-01-01)

Selected problems in designing and constructing surface mining machinery
by: Rusiński Eugeniusz, et al.
Published: (2012-01-01)

Synchronizing a Triple Dragline Stripping System in Thick Overburden
by: Erdem Bülent, et al.
Published: (2017-06-01)

The Reliability of Bucket Wheel Excavator - Review of Random Mechanical Failures
by: Ivan Aranđelović, et al.
Published: (2018-01-01)

Helicopter tail boom vibration analysis and suppression
by: Funnell, M. E. (Marc Edwin)
Published: (2012)

Study on the Determination Method of Cast Blasting Stockpile Forms in an Open-Pit Mine
by: Feng, D., et al.
Published: (2022)

Mechanical Properties of Dragline Silk Fiber Using a Bottom-Up Approach
by: Kulkarni, A., et al.
Published: (2022)

A systems analysis of the open pit mine design problem
by: Cross, Barton K.
Published: (1965)

The design of a low-noise rotor-only axial flow fan series
by: Van der Spuy, Sybrand Johannes
Published: (2012)

The damaging effects of mining on vertical shafts and ancillary excavations
by: Croeser, Roselt Waldmann
Published: (2015)

A study of the effects of the maintenance system at an open cast iron ore mine
by: Setzkorn, Kevin Anthony
Published: (2018)

Xanthurenic Acid Is the Main Pigment of <i>Trichonephila clavata</i> Gold Dragline Silk
by: Masayuki Fujiwara, et al.
Published: (2021-04-01)

JUSTIFICATION OF ENERGY CONSUMPTION DECREASE METHOD OF SOIL DIGGING PROCESS BY DRAGLINES
by: Krupko, V., et al.
Published: (2012-06-01)

An evaluation of a design method for mixed flow fans
by: Du Toit, Jacques H. (Jacques Hendrik)
Published: (2012)

An investigation into the mechanisms of time dependent deformation of hard rocks
by: Drescher, Karsten
Published: (2013)

Beam models for the hangingwall of deep, tabular excavations in stratified rock
by: De Villiers, N A
Published: (2016)

Improvement of the method of determination of rational parameters of excavator-automobile complexes of powerful quarries
by: O.O. Frolov, et al.
Published: (2020-06-01)

Evaluation of two different mechanized earth moving technologies truck and shovel and IPCC for handling material from a large open pit mine using requesite design and operational conditions, efficiency, cost , skills and safety as criteria using sishen iron ore mine as a case study
by: Banda, Nelson
Published: (2016)

Surface Analysis of Native Spider Draglines by FE-SEM and XPS
by: Hiromitsu Sogawa, et al.
Published: (2020-03-01)

Design and analysis of trapezoidal bucket excavator for backhoe
by: Hadi Sumar, et al.
Published: (2018-01-01)

An application of risk based design in open pit mine planning
by: Brits, Leilani
Published: (2014)

DEVELOPMENT OF LEGGED LOCOMOTION MACHINE TO INCREASE THE EFFICIENCY OF THEIR USE
by: N. M. Suslov, et al.
Published: (2018-09-01)

The capital cost required to equip a small producing metal mine
by: Pratt, Morton Edison, 1919-
Published: (1947)

Discrete element modeling of a vibratory subsoiler
by: Van der Linde, Jaco
Published: (2008)

Assessment of the correlation between the numerical and experimental dynamic characteristics of the bucket wheel excavator in terms of the operational conditions
by: Rusiński Eugeniusz, et al.
Published: (2013-01-01)

In-pit crushing and conveying as an alternative to an all truck system in open pit mines
by: Radlowski, Jacek K.
Published: (2010)

Ekskavatoriaus kaušo dantų abrazyvinio dilimo tyrimas
by: Augustinavičius, Giedrius
Published: (2008)

Vibration excitation of axial compressor rotor blades
by: Raubenheimer, Gert
Published: (2011)

The economics of open-pit slope angle variation
by: Schottler, George Richard, 1934-
Published: (1962)

Optimum combination of truck and shovel size for open pit mining
by: Padan, John W.
Published: (1960)

Preventive Replacement Decisions for Dragline Components Using Reliability Analysis
by: Nuray Demirel, et al.
Published: (2016-05-01)

Analysis and design of open-pit slope angles at Inspiration, Arizona
by: Moore, Alexander, 1948-
Published: (1977)

Structural Characterization of Black Widow Spider Dragline Silk Proteins CRP1 and CRP4
by: Mikayla Shanafelt, et al.
Published: (2020-07-01)