The CFD simulation of an axial flow fan
Thesis (MScEng (Mechanical and Mechatronic Engineering))--University of Stellenbosch, 2010. === ENGLISH ABSTRACT: The purpose of this project is to investigate the method and accuracy of simulating axial ow fans with three-dimensional axisymmetric CFD models. Two models are evaluated and compared...
Main Author: | |
---|---|
Other Authors: | |
Format: | Others |
Language: | en |
Published: |
Stellenbosch : University of Stellenbosch
2010
|
Subjects: | |
Online Access: | http://hdl.handle.net/10019.1/4344 |
id |
ndltd-netd.ac.za-oai-union.ndltd.org-sun-oai-scholar.sun.ac.za-10019.1-4344 |
---|---|
record_format |
oai_dc |
spelling |
ndltd-netd.ac.za-oai-union.ndltd.org-sun-oai-scholar.sun.ac.za-10019.1-43442016-01-29T04:03:29Z The CFD simulation of an axial flow fan Le Roux, Frederick Nicolaas Van der Spuy, S. J. Von Backstrom, T. W. University of Stellenbosch. Faculty of Engineering. Dept. of Mechanical and Mechatronic Engineering. computational fluitd dynamics Axial flow fan Flow visualization Dissertations -- Mechanical engineering Theses -- Mechanical engineering Air flow Axial flow Fans (Machinery) Thesis (MScEng (Mechanical and Mechatronic Engineering))--University of Stellenbosch, 2010. ENGLISH ABSTRACT: The purpose of this project is to investigate the method and accuracy of simulating axial ow fans with three-dimensional axisymmetric CFD models. Two models are evaluated and compared with experimental fan data. Veri cation data is obtained from a prototype fan tested in a facility conforming to the BS 848 standards. The ow eld over the blade surfaces is investigated further with a visualization experiment comprising of a stroboscope and wool tufts. Good correlation is found at medium to high ow rates and recommendations are made for simulation at lower ow rates as well as test guidelines at the fan test facility. The results and knowledge gained will be used to amend currently used actuator disc theory for axial ow fan simulation. AFRIKAANSE OPSOMMING: Die doel van hierdie projek is om die metode en akkuraatheid om aksiaalvloeiwaaiers met drie-dimensionele BVM modelle te simuleer, te ondersoek. Twee modelle word geëvalueer en met eksperimentele waaiertoetse vergelyk. Veri- kasie data is verkry vanaf 'n prototipe waaier wat in 'n fasiliteit getoets is en wat aan die BS 848 standaarde voldoen. Die vloeiveld oor die lemoppervlaktes word ondersoek met 'n visualisering eksperiment wat uit 'n stroboskoop en wolletjies bestaan. Goeie korrelasie word gevind vir medium tot hoë massavloeie en aanbevelings word gemaak vir die simulasie by laer massavloeie met riglyne vir toetswerk in die toets-fasiliteit. Die resultate en kennis opgedoen sal gebruik word in die verbetering van huidige aksieskyfteorie vir numeriese aksiaalvloeiwaaier simulasies. 2010-02-22T12:24:37Z 2010-08-13T15:01:51Z 2010-02-22T12:24:37Z 2010-08-13T15:01:51Z 2010-03 Thesis http://hdl.handle.net/10019.1/4344 en University of Stellenbosch 119 p. : ill. Stellenbosch : University of Stellenbosch |
collection |
NDLTD |
language |
en |
format |
Others
|
sources |
NDLTD |
topic |
computational fluitd dynamics Axial flow fan Flow visualization Dissertations -- Mechanical engineering Theses -- Mechanical engineering Air flow Axial flow Fans (Machinery) |
spellingShingle |
computational fluitd dynamics Axial flow fan Flow visualization Dissertations -- Mechanical engineering Theses -- Mechanical engineering Air flow Axial flow Fans (Machinery) Le Roux, Frederick Nicolaas The CFD simulation of an axial flow fan |
description |
Thesis (MScEng (Mechanical and Mechatronic Engineering))--University of Stellenbosch, 2010. === ENGLISH ABSTRACT: The purpose of this project is to investigate the method and accuracy of simulating
axial ow fans with three-dimensional axisymmetric CFD models. Two
models are evaluated and compared with experimental fan data. Veri cation
data is obtained from a prototype fan tested in a facility conforming to the BS
848 standards. The ow eld over the blade surfaces is investigated further
with a visualization experiment comprising of a stroboscope and wool tufts.
Good correlation is found at medium to high ow rates and recommendations
are made for simulation at lower ow rates as well as test guidelines at the fan
test facility. The results and knowledge gained will be used to amend currently
used actuator disc theory for axial ow fan simulation. === AFRIKAANSE OPSOMMING: Die doel van hierdie projek is om die metode en akkuraatheid om aksiaalvloeiwaaiers
met drie-dimensionele BVM modelle te simuleer, te ondersoek. Twee
modelle word geëvalueer en met eksperimentele waaiertoetse vergelyk. Veri-
kasie data is verkry vanaf 'n prototipe waaier wat in 'n fasiliteit getoets is en
wat aan die BS 848 standaarde voldoen. Die vloeiveld oor die lemoppervlaktes
word ondersoek met 'n visualisering eksperiment wat uit 'n stroboskoop en
wolletjies bestaan. Goeie korrelasie word gevind vir medium tot hoë massavloeie
en aanbevelings word gemaak vir die simulasie by laer massavloeie met
riglyne vir toetswerk in die toets-fasiliteit. Die resultate en kennis opgedoen
sal gebruik word in die verbetering van huidige aksieskyfteorie vir numeriese
aksiaalvloeiwaaier simulasies. |
author2 |
Van der Spuy, S. J. |
author_facet |
Van der Spuy, S. J. Le Roux, Frederick Nicolaas |
author |
Le Roux, Frederick Nicolaas |
author_sort |
Le Roux, Frederick Nicolaas |
title |
The CFD simulation of an axial flow fan |
title_short |
The CFD simulation of an axial flow fan |
title_full |
The CFD simulation of an axial flow fan |
title_fullStr |
The CFD simulation of an axial flow fan |
title_full_unstemmed |
The CFD simulation of an axial flow fan |
title_sort |
cfd simulation of an axial flow fan |
publisher |
Stellenbosch : University of Stellenbosch |
publishDate |
2010 |
url |
http://hdl.handle.net/10019.1/4344 |
work_keys_str_mv |
AT lerouxfredericknicolaas thecfdsimulationofanaxialflowfan AT lerouxfredericknicolaas cfdsimulationofanaxialflowfan |
_version_ |
1718164812717883392 |