Semi-Trailer Structural Failure Analysis Using Finite Element Method

Semi-Trailer Structural Failure Analysis Using Finite Element Method

This project is centred on an ongoing trailer component failure problem at the STEELBRO New Zealand Ltd due to cracks. In this research the problem has been systematically approached using ANSYS finite element analysis software. The approach involves investigation of the problem and structural analy...

Full description

Bibliographic Details
Main Author:	Baadkar, Chetan Chandrakant
Language:	en
Published:	University of Canterbury. Mechanical Engineering 2011
Subjects:	Finite Element Analysis Semitrailer Fatigue analysis Strain gauge
Online Access:	http://hdl.handle.net/10092/5240

Similar Items

AEROTAXI ground static test and finite element model validation
by: Radu BISCA, et al.
Published: (2011-06-01)

Strength of welded thin-walled square hollow section T-joint connections by FE simulations and experiments
by: Moazed, Reza
Published: (2010)

Axle Load Determination of Truck with Trailer and Truck with Semitrailer for Wood Transportation
by: Marijan Šušnjar, et al.
Published: (2011-04-01)

Influence of a metaphyseal sleeve on the stress-strain state of a bone-tumor implant system in the distal femur: an experimental and finite element analysis
by: Jian-jun Li, et al.
Published: (2020-12-01)

Biomechanical evaluation of one-piece and two-piece small-diameter dental implants: In-vitro experimental and three-dimensional finite element analyses
by: Aaron Yu-Jen Wu, et al.
Published: (2016-09-01)

FINITE ELEMENT SIMULATION OF INDENTATION OF POROUS MATERIALS
by: Saran, Aditi
Published: (2004)

Analysis of fatigue life for tube trailer cylinders
by: Xinqi YU, et al.
Published: (2015-08-01)

Finite Element Model of the Strain Gauge For Determining Uniaxial Tension
by: Vladimír GOGA
Published: (2013-12-01)

The truck trailer suspension axles failure analysis and modelling
by: Jurijus Tretjakovas, et al.
Published: (2021-08-01)

Finite Element Analysis of Heavy Duty Riveted Steel Grating Bridge Deck
by: Warda Abdulla, et al.
Published: (2021-06-01)

Validation experiments on finite element models of an ostrich (Struthio camelus) cranium
by: Andrew R. Cuff, et al.
Published: (2015-10-01)

Stress distribution patterns of implant supported overdentures-analog versus finite element analysis: A comparative in-vitro study
by: Soumyadev Satpathy, et al.
Published: (2015-01-01)

Development of a finite element based nominal stress extraction procedure for fatigue analysis of welded structures
by: Grove, Alewyn Petrus
Published: (2013)

Design evaluation and redesign of a refrigerated semi-trailer structure using the finite element technique
by: Du Toit, Johannes Francois
Published: (2012)

Contribution to fatigue damage prediction of thin shell finite element models
by: Sága Milan, et al.
Published: (2018-01-01)

Nonlinear Finite Element Analysis of Reinforced Concrete Shells
by: Mustafa K. Ahmed, et al.
Published: (2013-05-01)

Application of semi-analytical finite element method coupled with infinite element for analysis of asphalt pavement structural response
by: Pengfei Liu, et al.
Published: (2015-02-01)

Investigating strains on the Oseberg ship using photogrammetry and finite element modeling
by: Eriksson, Andreas, et al.
Published: (2020)

Fatigue design of welded joints using the finite element method and the 2007 ASME Div. 2 Master curve
by: G. Nicoletto, et al.
Published: (2009-07-01)

Experimental verification of the finite element analysis of a dynamically loaded semi-trailer
by: Debesay, Teclemicael Tewelde
Published: (2012)

Comparison of Stress and Strain Distribution around Splinted and Non-splinted Teeth with Compromised Periodontium: A Three-dimensional Finite Element Analysis
by: Reza Amid, et al.
Published: (2018-06-01)

Analysis of Printed Circuit Boards strains using finite element analysis and digital image correlation
by: Liviu Marsavina, et al.
Published: (2020-01-01)

Influence of Implant-Abutment Contact Surfaces and Prosthetic Screw Tightening on the Stress Concentration, Fatigue Life and Microgap Formation: A Finite Element Analysis
by: João Paulo Mendes Tribst, et al.
Published: (2021-04-01)

Mechanical Performance of Chairside Ceramic CAD/CAM Restorations and Zirconia Abutments with Different Internal Implant Connections: In Vitro Study and Finite Element Analysis
by: Sergio Giner, et al.
Published: (2021-09-01)

ASSUMED STRESS FUNCTION FINITE ELEMENT METHOD (STRUCTURES, COMPLEMENTARY ENERGY, BLENDING INTERPOLATION).
by: SARIGUL, NESRIN.
Published: (1984)

Crack Propagation by Finite Element Method
by: Luiz Carlos H. Ricardo
Published: (2017-12-01)

Crack Propagation by Finite Element Method
by: Luiz Carlos H. Ricardo
Published: (2018-01-01)

A finite element analysis of sacroiliac joint displacements and ligament strains in response to three manipulations
by: Zhun Xu, et al.
Published: (2020-10-01)

Finite Element Analysis of the Effect of Superstructure Materials and Loading Angle on Stress Distribution around the Implant
by: Jafari K, et al.
Published: (2014-12-01)

Finite Element Analysis of Stress-Strain Response at the Tool Pin during Friction Stir Process
by: Armansyah, et al.
Published: (2015)

Study in the Structural Behavior of Precast Lining of a Large Diameter Multifunctional Tunnel Performed by Means of Finite Elements Analysis with Respect to Saint-Petersburg Geological Conditions
by: Ledyaev A. P., et al.
Published: (2019-12-01)

Biomechanical effect of implant design on four implants supporting mandibular full-arch fixed dentures: In vitro test and finite element analysis
by: Aaron Yu-Jen Wu, et al.
Published: (2020-10-01)

Finite Element Analysis of Aluminum Honeycombs Subjected to Dynamic Indentation and Compression Loads
by: A.S.M. Ayman Ashab, et al.
Published: (2016-03-01)

Failure Prediction of Honeycomb Panel Joints using Finite Element Analysis
by: Lyford, Andrew Lindquist
Published: (2017)

STRENGTH ANALYSIS OF THE FRAME OF A TRAILER
by: Silvia MEDVECKÁ-BEŇOVÁ
Published: (2017-09-01)

Thermal distortion analysis method for TMCP steel structures using shell element
by: Yunsok Ha, et al.
Published: (2009-12-01)

Strain Behavior of Nickel Alloy 200 during Multiaxial Forging through Finite Element Modeling
by: Faramarz Djavanroodi, et al.
Published: (2019-01-01)

Crownwall Failure Analysis through Finite Element Method
by: Dimitrios Dermentzoglou, et al.
Published: (2021-12-01)

Finite element analysis: New dimension in prosthodontic research
by: Swapnil Ramchandra Chopade, et al.
Published: (2014-01-01)

General multivariate approximation techniques applied to the finite element method
by: Hassoulas, Vasilios
Published: (2015)