Amorphous carbon coating systems for pressurised water reactor tribological applications

Amorphous carbon coating systems for pressurised water reactor tribological applications

Bibliographic Details
Main Author:	Cooper, Jack
Other Authors:	Leyland, Adrian ; Matthews, Allan ; David, Stewart
Published:	University of Sheffield 2018
Subjects:	620
Online Access:	https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.762575

Similar Items

The tribological behaviour of three carbon-based coatings, tested in air, water and oil environments
by: Stallard, Joanne
Published: (2005)

Evaluation and characterisation of the tribological properties of polymeric coatings for downhole application
by: Bello, Jelili Olakunle
Published: (2003)

DATA ASSIMILATION APPLIED TO PRESSURISED WATER REACTORS
by: Dixon J.R, et al.
Published: (2021-01-01)

Pressurised Water Reactor Control by the Hierarchical Method
by: Ilkka Leikkonen
Published: (1987-04-01)

An investigation of thin amorphous carbon-based sputtered coatings for MEMS and micro-engineering applications
by: Wilson, Gavin M.
Published: (2008)

Doping of amorphous carbon
by: Kleinsorge, Britta Yvonne
Published: (2000)

Tetraherally bonded amorphous carbon for electronic device applications
by: Maeng, Sung-Lyul
Published: (2001)

Flow and heat transfer in pressurised water reactor reflood
by: Zeng, Yiyun
Published: (2010)

The use of dispersants in pressurised water reactor steam generators
by: Tulloch, Sam
Published: (2011)

Nanoscale properties of amorphous carbon
by: Ferrari, Andrea Carlo
Published: (2001)

An efficient numerical simulation for modelling outflow following rupture or puncture of pressurised networks
by: Oke, Adeyemi Olumuyiwa
Published: (2004)

Modelling the transient thermal response of pressurised vessels during blowdown under fire attack
by: Falope, Gboyega Bishop Oyewale
Published: (2003)

Field emission from tetrahedral amorphous carbon
by: Satyanarayana, Bukinakere Subbakrishniah
Published: (2000)

A spectroscopic study of modified tetrahedral amorphous carbon (ta-C) and hydrogenated amorphous carbon (a-C:H) films for diffusion barrier applications
by: Abbas, Gamal A.-W.
Published: (2004)

Tetrahedral amorphous carbon based field emission display
by: Tsai, Tsung Hui
Published: (2002)

Material Balance of Fuel Cycles for Plutonium Recycling in Pressurised Water Reactors
by: Mancheva Zlatina, et al.
Published: (2020-01-01)

Amorphous Carbon Coatings for Total Knee Replacements—Part II: Tribological Behavior
by: Benedict Rothammer, et al.
Published: (2021-06-01)

The Potential of Pressurised Water Reactors to Provide Flexible Response in Future Electricity Grids
by: Aiden Peakman, et al.
Published: (2020-02-01)

Flooding and non-equilibrium in counter-current flows with reference to pressurised water reactors
by: Megahed, Mohamed M. M.
Published: (1981)

Oxidation kinetics of 316l stainless steel in the pressurised water reactor environment
by: Matthews, Ryan Paul
Published: (2019)

Local properties of tetrahedral amorphous carbon investigated by scanning tunnelling microscopy
by: Arena, Claudia
Published: (1999)

Effect of Zirconium Doping of Amorphous Carbon Coating and Carbon-nitride Coating on Mechanical and Tribological Properties, and Heat and Corrosion Resistance
by: Yu-ChenLai, et al.
Published: (2018)

Tribology of free-rolling tyres
by: Liu, Feiyang
Published: (2009)

Physical vapour deposition of aluminium-rich nanostructured/amorphous metallic coatings for wear and corrosion protection
by: Lawal, Josephine
Published: (2017)

Tribological studies with the atomic force microscope
by: Lantz, Mark Alfred
Published: (1997)

The dynamic analysis of nuclear power plant models with special reference to the pressurised water reactor
by: Walker, S. A.
Published: (1984)

The core surveillance system SCORPIO and its validation against measured pressurised-water reactor plant data
by: Øivind Berg, et al.
Published: (1987-04-01)

Improved Tribological Performance of Amorphous Carbon (a-C) Coating by ZrO2 Nanoparticles
by: Jinzhu Tang, et al.
Published: (2016-09-01)

Two-phase flow experiments in a model of the hot leg of a pressurised water reactor
by: Seidel, T., et al.
Published: (2012)

Two-phase flow experiments in a model of the hot leg of a pressurised water reactor
by: Seidel, Tobias, et al.
Published: (2010)

Model based predictive control for load following of a pressurised water reactor / Gerhardus Human
by: Human, Gerhardus
Published: (2011)

Model based predictive control for load following of a pressurised water reactor / Gerhardus Human
by: Human, Gerhardus
Published: (2011)

STUDY OF THE TRIBOLOGICAL PROPERTIES OF FLUORINATED AMORPHOUS CARBON FILMS
by: DANNY PILAR ARAUCANO HOLGADO
Published: (2012)

The properties of amorphous polymers
by: Mills, Nigel J.
Published: (1976)

Nano-patterning of hydrogenated amorphous carbon (a-C:H) surfaces for control of protein absorption
by: Mughal, Muhammad Zeeshan
Published: (2013)

Neutronic simulation of a European Pressurised Reactor / Ontlametse Emmanuel Montwedi
by: Montwedi, Ontlametse Emmanuel
Published: (2015)

Neutronic simulation of a European Pressurised Reactor / Ontlametse Emmanuel Montwedi
by: Montwedi, Ontlametse Emmanuel
Published: (2015)

Tribological, electrochemical, and tribocorrosion behaviour of new titanium biomedical alloys
by: Khulief, Zuheir
Published: (2018)

On the tribology of gold electrodeposits
by: Goodman, Simon John Nye
Published: (1988)

An experimental study of air entrainment in a blade coating system with a pressurised pond applicator
by: Chen, Qingyuan
Published: (2005)