The measurement of the viscosity-temperature characteristics of copper smelting slags

The measurement of the viscosity-temperature characteristics of copper smelting slags

Bibliographic Details
Main Author:	Roberts, D. A.
Published:	Swansea University 1960
Subjects:	671
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.638683

Similar Items

Temperature-viscosity relationships of slags
by: Jones, T. J. B.
Published: (1962)

Reach of iron bath smelting slag viscosity
by: CHEN, BO-YUNG, et al.
Published: (2001)

The influence of welding parameters on slag/metal reactions during submerged arc welding
by: North, T. H.
Published: (1975)

Measurement and finite element modelling of temperatures in welding processes
by: Tan, Cheng Peng Henry
Published: (2005)

An investigation into the problem of measuring the temperature distribution of the rake-face of a cutting tool
by: Qureshi, A. H.
Published: (1965)

An investigation into the sintering of copper alloy bearings
by: Hazeldine, Paul
Published: (2000)

Annealing behaviour of shock deformed copper and iron
by: Chojnowski, Edmundo Antonio
Published: (1969)

Copper metallisation for high density interconnects and planar inductors
by: Toh, H. W.
Published: (2004)

Ultrasonic spot weld testing with automatic classification
by: Roberts, D. R.
Published: (2003)

The effect of zinc and copper ions on the degradation of the brightener benzylidene acetone
by: Ahmed, Sabih
Published: (2004)

Precipitation hardening in sintered iron - 2 to 8% copper alloys
by: Phadke, Vidyadhar Balvant
Published: (1978)

Novel precursors for chemical vapour deposition of the metals copper, nickel and cobalt
by: Rosenberg, Chico L.
Published: (2003)

Factors affecting temperature during the extrusion of some non-ferrous metals
by: Coakham, J. W.
Published: (1960)

Research on the Resource of Copper Secondary Smelting Slag
by: Ping-Cheng Liu, et al.
Published: (2017)

Comparative evaluation of signal processing methods for locating acoustic emission sources in jointed copper pipes
by: Wichaidit, Wadee
Published: (2007)

Prediction of temperatures in orthogonal machining using finite element method
by: Murarka, P. D.
Published: (1977)

The use of insoluble anodes in horizontal conveyorized printed circuit board manufacture : their effect on the performance and electrochemistry of acid copper electroplating solutions
by: Cobley, Andrew Joseph
Published: (2002)

An Investigation of Optimal Control of The Metal Cutting Process using Commercially Feasible On-Line Measurements
by: Graham, I. H.
Published: (1974)

Life assessment of welded INCONEL 718 at high temperature
by: Tanner, David W. J.
Published: (2009)

Process monitoring of blanking coarse grained and ultra-fine grained aluminium sheets using force-displacement characteristics and acoustic emission technique
by: Hamid, Hisham
Published: (2010)

Development of high temperature/oxidation-resistant PVD coatings for cutting tools using HIPIMS
by: Morton, Thomas Joseph
Published: (2017)

The performance characteristics of a surface-modified cutting tool
by: Watmon, Titus
Published: (2013)

Dissolution of copper from smelting slag by leaching in chloride media
by: Dimitrijević M., et al.
Published: (2017-01-01)

Extending life of High Pressure Die Casting Dies
by: Long, A. D.
Published: (2010)

Stress engineering of friction stir welding : measurement and control of welding residual stresses
by: Altenkirch, Jens
Published: (2009)

Development of the deep hole drilling method for residual stress measurement in metallic welds
by: Gang, Zheng
Published: (2013)

The tool/workpiece construction resistance and its application to the in-process measurement of tool wear
by: Myers, Stephen
Published: (1972)

The wear and performance characteristics of PCBN cutting tools when machining D3 hardened steel
by: Taylor, Ciaran John
Published: (2005)

Viscosities of Lead-Copper Converter Slags
by: Mantha, D., et al.
Published: (2005-06-01)

Plasma diagnostic studies of DC ion plating discharges : influence of discharge and vapour characteristics on coating deposition
by: Davison, Andrew
Published: (2003)

Effect of Copper and Iron Ions on the Sulphidizing Flotation of Copper Oxide in Copper Smelting Slag
by: Qing-qing Pan, et al.
Published: (2018-01-01)

Optimised control of the machining of a non-homogeneous steel workpiece using in-process tool wear rate measurement
by: Hinds, Brendan Kieran
Published: (1970)

The effects of machined workpiece surface topography and integrity on fatigue life
by: Novovic, D.
Published: (2004)

Surface Formation During Machining
by: Gillibrand, D.
Published: (1975)

On-line investigation of grinding wheel surface wear
by: Gaut, D.
Published: (1979)

High-speed GMAW and laser GMAW hybrid welding of steel sheet
by: Harris, I. D.
Published: (2009)

Fatigue of spot welded high strength sheet steels
by: Chucas, D. G.
Published: (2003)

The application of artificial intelligence techniques to the control of spot welding
by: Ablewhite, J. D.
Published: (2000)

The tempering of steel
by: Hyam, E. D.
Published: (1954)

Carbon migration across dissimilar metal welds, related to power plant
by: Elder, D. L.
Published: (2002)