The measurement of oil film thickness between rolling disks using a variable magnetic reluctance technique

The measurement of oil film thickness between rolling disks using a variable magnetic reluctance technique

Bibliographic Details
Main Author:	Cameron, R.
Published:	University of Cambridge 1967
Subjects:	621.89
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.597239

Similar Items

Film thicknesses in a rolling sliding elastohydrodynamic line contact
by: Hedley, Christopher John
Published: (1978)

Oil film thickness and friction in elliptical contacts
by: Thorp, N.
Published: (1972)

Hydrodynamic pressure and oil film thickness between piston ring and liner
by: Brown, S. R.
Published: (1977)

The effects of magnetic fields on rolling contact fatigue wear
by: Iida, Yusuke
Published: (2007)

The Shear of Elastohydrodynamic Oil Films
by: Tevaarwerk, J. L.
Published: (1976)

Oil Film Conditions in Piston Engine Bearings
by: Goodwin, G.
Published: (1977)

Oil film thickness and pressure distribution in elastohydrodynamic elliptical contacts
by: Mostofi, Ali
Published: (1982)

The oil film characteristics of a crankshaft main bearing
by: Heppenstall, T.
Published: (1978)

Dynamic Characteristics of A Journal Bearing Oil-Film
by: Woodcock, J. S.
Published: (1971)

Film forming and friction properties of single phase and two phase lubricants in high-speed rolling/sliding contact
by: Hili, Joslyn
Published: (2011)

Investigation of the influence of the design of a pin-on-disk tribometer on friction data
by: Lockyer, A. P.
Published: (2007)

Corrugation and the dynamics of rolling contact
by: Carson, R. M.
Published: (1969)

Corrugation and the dynamics of rolling contact
by: Gray, G. G.
Published: (1972)

Frictional effects at point rolling contacts
by: Dayson, C.
Published: (1966)

An interferometric analysis of rolling bearing lubrication
by: Kellas, A. S. M.
Published: (1978)

Wear of hard steel in lubricated, rolling contact
by: Olver, Andrew Vernon
Published: (1986)

The detection of incipient failure in machinery rolling-element bearings
by: Tan, C. C.
Published: (1981)

The effects of lubricant starvation on the behaviour of rolling contact bearings
by: Hargreaves, R. A.
Published: (1973)

Lubricant density and viscosity in a rolling line contact
by: Sherwood, T. J. M.
Published: (1979)

Scuffing in sliding-rolling line contacts : the influence of thermal behaviour
by: Vaughan, D. A.
Published: (1985)

The effects of lubricants and scale upon friction in hot flat rolling
by: Al-Alawi, A. M. S.
Published: (1980)

Running-in and the evolution of metallic surfaces subjected to sliding and rolling contact
by: Karpinska, Agnieszka
Published: (2010)

Pitting of hard steel rolling-sliding elastohydrodynamically lubricated line contacts
by: Graham, R.
Published: (1980)

Thermal effects of concentrated sliding/rolling line contacts and their relation to scuffing wear
by: Siu, S. W.
Published: (1995)

Squeeze-Film Bearing Characteristics
by: Williams, R. J.
Published: (1972)

Squeeze film journal bearings
by: White, D. C.
Published: (1970)

Top ring zone oil sampling in gasoline engines
by: Pease, Nick
Published: (2001)

A study of continuously variable speed transmissions
by: Davies, P. B.
Published: (1963)

An Investigation into the Performance of Grease Films in Elastohydrodynamic Contacts
by: Attia, F. S.
Published: (1975)

The Non-Linear Performance of Squeeze-Film Bearings
by: Humes, B.
Published: (1977)

Ion plated carbon films and their tribological properties
by: Salama, M. S.
Published: (1979)

Application of electrochemical techniques to tribology
by: Xu, Xiaoyin
Published: (2004)

Linear and nonlinear vibrational characteristics of oil lubricated journal bearings
by: Myers, Christopher John
Published: (1981)

The fluid film lubrication of rigid and elastic elliptical contacts
by: Dunn, J. F.
Published: (1983)

The stability of a fluid film on the surface of a cone
by: Holgate, Michael John
Published: (1971)

Tribological Properties of Ion-Plated Thin-Metallic Films
by: El-Sherbiney, M. G. D.
Published: (1975)

Physical analysis of pitting in rolling and sliding discs
by: Wu, Yuk L.
Published: (1980)

Tribological properties of ion plated metal films in high vacuum
by: Soliman, F. A.
Published: (1979)

Studies of tribo/thermo chemical processes at additive mediated metal/oil interfaces
by: Ioakimidis, Christos
Published: (2001)

Experimental techniques for investigating lubricated, compliant contacts
by: Myant, Connor William
Published: (2010)