The plastic behaviour of tubular beams

The plastic behaviour of tubular beams

Bibliographic Details
Main Author:	Bailey, R. W.
Published:	University of Cambridge 1958
Subjects:	620.110287
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.596256

Similar Items

Stress concentration factors for multiplanar tubular joints
by: Jandali, M. W.
Published: (1997)

Mechanics of laminated bi-stable tubular structures
by: Iqbal, K.
Published: (2002)

The suitability of ferritic oxide dispersion strengthened tubular components for heat exchanger applications
by: Rees, M.
Published: (1995)

Fracture mechanics based fatigue assessment of weld toe cracks in offshore tubular structures
by: Bowness, D.
Published: (1997)

A fracture mechanics approach to the fatigue assessment of tubular welded Y and K-joints
by: Connolly, Mark Paul Mary
Published: (1987)

The failure mode analysis of plastic gears
by: Cropper, Andrew Boyd
Published: (2003)

Plastic deformation of circular metal diaphragms
by: Ilahi, M. F.
Published: (1977)

The Elastic and Plastic Buckling of Circular Cylinders in Bending
by: Reddy, B. D.
Published: (1977)

Impact dynamics of rods, beams and panels
by: Feroz, Kottamal Thanduparakal
Published: (1997)

A Contribution to the Geometric Nonlinear Behaviour of Orthotropic Plates
by: Banks, W. M.
Published: (1977)

Large-deflection elasto-plastic analysis of discretely stiffened plates
by: Djahani, Parviz
Published: (1977)

Measuring elastic, plastic and fracture properties using micro-cantilever testing
by: Armstrong, D. E. J.
Published: (2009)

Elastic-plastic bending analysis of plates and slabs by the finite element method
by: McNeice, Gregory Malcolm
Published: (1967)

Fracture Mechanics of the Elastic Plastic Crack Growth in a Structural Steel
by: De Castro, P. M. S. T.
Published: (1979)

The analysis of geometrically non-linear elasto-plastic frames by mathematical programming
by: Alexa, Pavel
Published: (1976)

Non-Destructive Testing and Fatigue Behaviour of Carbon Fibre Reinforced Polymer
by: Prakash, R.
Published: (1975)

A fracture mechanics approach to environmental and elastic-plastic fatigue crack propagation
by: De Moura Branco, Carlos Augusto Gomes
Published: (1976)

Fracture behaviour of metal-composite joints
by: Clifford, S.
Published: (2003)

The behaviour of intersections in cylindrical pressure vessels
by: Pitman, F. S.
Published: (1971)

A Critical Analysis of the Behaviour of Rail Joints
by: Watson, Charles
Published: (2008)

The development of J-integral estimation schemes for shallow cracked geometries under large plastic deformation
by: Lau, C. L.
Published: (1995)

Elastic-plastic finite element analysis of flat plates with projections subjected to axial and shear loading
by: Pipelzadeh, M. K.
Published: (1993)

The ultimate load behaviour of multiplanar KK-joints subjected to symmetrical and anti-symmetrical axial loading
by: Wilmshurst, S. R.
Published: (1995)

Approximate theories for the flexural vibration of uniform beams and their derivation from the general elastic equations
by: Barr, A. D. S.
Published: (1956)

Fatigue behaviour and damage mechanisms of PEEK/AS4 composites
by: Ni, Z.
Published: (1995)

The behaviour of metals under tensile loads of short duration
by: Gibson, J.
Published: (1951)

Fracture toughness parameters and elastic plastic analysis of non-moderate fracture conditions using finite element methods
by: Anderson, D. M.
Published: (1972)

Environmental stress cracking behaviour of cross-linked acrylic based resins
by: Li, J. J.
Published: (1995)

Non-destructive testing of metal ducted post-tensioned bridge beams using sonic impact-echo techniques
by: Martin, Julia
Published: (1997)

Elastic Behaviour of Flexible Piping Components and Creep and Creep Buckling of Thin Tubes
by: Temizkaya, M.
Published: (1978)

Modelling and predicting fatigue crack growth behaviour in weld induced residual stress fields
by: Servetti, Guido
Published: (2011)

A high-sensitivity resonant sensor realised through the exploitation of nonlinear dynamic behaviour
by: Waugh, William Haley
Published: (2011)

The elastic and creep behaviour of pipe bends of oval cross section loaded by internal pressure
by: Austin, A.
Published: (1979)

Characterisation of the strain rate dependent behaviour of 3d composites using a hierarchical approach
by: Gerlach, Robert
Published: (2010)

Limit state analysis : adaptive finite element upper and lower bound approach to the evaluation of the limit load of a Von Mises rigid-plastic material body in plane stress
by: Cordero, Raymundo
Published: (2005)

The dynamic behaviour of hydrostatic-pressure-sensitive materials at high strain-rates based on split hopkinson pressure bar technique
by: Lu, Yubin
Published: (2010)

The effect of specimen geometry and hoop stress on the high temperature behaviour of ½ Cr ½ Mo ¼ V/2 ¼ Cr/Mo steel
by: Hollinshead, P. M.
Published: (1998)

Finite element analysis in metal forming processes
by: Zhang, W.-C.
Published: (1987)

A study of the mechanisms of fracture processes in high purity nickel and nickel-tin alloys at elevated temperatures
by: Davies, P. W.
Published: (1960)

The reflexion of disturbances within an elastic sphere
by: Burridge, R.
Published: (1963)

Cannot write session to /tmp/vufind_sessions/sess_j4po2aif45un4f4i21b7d820nt