Accelerated Cooling of Thermoplastic in Rotational Moulding

Accelerated Cooling of Thermoplastic in Rotational Moulding

Bibliographic Details
Main Author:	Tan, S. B.
Published:	Queen's University Belfast 2010
Subjects:	668.9
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.527898

Similar Items

Screw plasticating in the injection moulding of thermoplastics
by: Nunn, Robert Eric
Published: (1975)

Rotational moulding of cross-linked polyethylene
by: Soares, R. J. M.
Published: (2002)

Rotational moulding of a class A finish on plastic parts
by: O'Brien, E.
Published: (2002)

Process Parameters Optimisation of Injection Moulding using SLA Inserts in Conventional & CCC Moulds
by: Alenezi, Dharay Falah Saleh
Published: (2010)

Prediction and characterization of compression mould flow for unsaturated polyester resin sheet moulding compound
by: Silva-Nieto, R. J.
Published: (1980)

Study of fluid flow and heat transfer during mould filling in injection moulding of rubber compounds
by: Barel, M.
Published: (1979)

The calibration process in thermoplastics extrusion
by: Samaras, V.
Published: (2006)

Modelling and optimising of reaction injection moulding
by: Dos Santos Mateus, Artur Jorge
Published: (2011)

Biaxial deformation of PET at conditions applicable to stretch blow moulding and the subsequent effect on mechanical properties
by: Tan, Cheong Wang
Published: (2008)

The formability of long fibre thermoplastic composites
by: Steel, David Thomas
Published: (1998)

Stability of Post-Yield Deformation in Thermoplastics
by: Cross, A.
Published: (1977)

Microstructure and physical property control of injection moulded polypropylene
by: Kalay, Guerhan
Published: (1994)

Print and film deformation during the in-mould decoration process
by: Phillips, C. O.
Published: (2004)

Residual stresses and fracture in nylon-6 injection mouldings
by: Russell, D. P.
Published: (1976)

Modelling and Computer Control of the Plastics Injection Moulding Process
by: Battye, P. G.
Published: (1977)

Process and production measurements for automatic inspection and control of injection moulding
by: Dawson, A. J.
Published: (1999)

The characteristics fo flowing polymer melts in the injection moulding process
by: Sombatsompop, Narongrit
Published: (1997)

The processing and performance of thermoplastics for use in medical device applications
by: Ruddy, Aine Catherine
Published: (2008)

Computer aided design of preforms for injection blow moulded plastic containers
by: McEvoy, James
Published: (1996)

Effect of Magnetic Field on the Alignment and Orientation of Magnetic Particles in Injection moulding
by: Ogur, Erich Okoth
Published: (2007)

The mechanical properties of micro-perforated long fibre thermoplastic composites
by: Matthams, Thomas James
Published: (1998)

The effect of the structural parameters of polyester resins on the mechanical properties of polyester moulding compounds
by: Rhoades, G. V.
Published: (1979)

The Production of Nano-Sized Particulate Flame Retardants and their Application in Thermoplastic Polymers
by: Devine, Stephen John
Published: (2001)

Modelling Vulcanization and Rheological Processes during Injection Moulding of Rubber Mixes using CAE
by: Laca, Alexander Arrillaga
Published: (2011)

The development of rubber-thermoplastic blends from ground tyre rubber and waste polypropylene
by: Egodage, Shantha M.
Published: (2008)

Rheological and curing characteristics of thermosetting plastics as related to injection moulding
by: Paul, K. T.
Published: (1976)

The quest for a safer accelerator for polychloroprene rubber
by: Berry, Keith
Published: (2014)

Ultra-inert hierarchical fibre-reinforced nanocomposites
by: Tran, Michael Quoc-Binh Tan
Published: (2011)

The effects of contamination upon mechanical properties and re-processing stability of recycled poly(vinyl chloride)
by: Maund, B.
Published: (1997)

The embrittlement of poly(hydroxybutyrate)
by: Hurrell, B. L.
Published: (1997)

Recycling plastics from waste computer equipment
by: Brennan, Louise B.
Published: (2004)

High modulus organic fibre reinforced polysulphone
by: Howes, B. V.
Published: (1979)

Nanoscale fillers : fillers for high oxygen permeability polymer films
by: Fay, Jonathan D. B.
Published: (2007)

A Study of Bulk Free-Radical Photo Copolymerisation and Surfactant Free Emulsion Polymerisation Using Intensified Processing Methods
by: Dobie, Christopher George
Published: (2010)

A novel self-healing shape memory polymer-cementitious system
by: Dunn, Simon Craig
Published: (2010)

Development of Nafion-Mordenite composite membranes for direct methanol fuel cell application
by: Yoonoo, Chaiwat
Published: (2010)

Surface modification of PDMS-based microfluidic devices through plasma polymerisation : production and application
by: Forster, Simon
Published: (2010)

The effects of polydispersity on diblock copolymer melts
by: Beardsley, Thomas Mark
Published: (2010)

Zirconium-mediated Ring-opening Polymerisation of Cyclic Esters for Tissue Engineering Applications
by: Wu, Xujun
Published: (2010)

Exploration of polymer replacements for SF6 in circuit breakers
by: Brookes, Ricky John
Published: (2010)

Cannot write session to /tmp/vufind_sessions/sess_g2a12ij967j4k67bvfg2diefc2