Development of a rubber toughened epoxy adhesive loaded with carbon nanotubes, for aluminium-polymer bonds

Development of a rubber toughened epoxy adhesive loaded with carbon nanotubes, for aluminium-polymer bonds

This thesis describes the formulation of a ternary thermosetting adhesive which consists of a diglycidyl ether of bisphenol-A (DGEBA) epoxy resin cured with 3,3’-diamino diphenyl sulphone (3,3’-DDS) hardener and modified through the addition of carboxyl- terminated butadiene-acrylonitrile (CTBN) rub...

Full description

Bibliographic Details
Main Author:	Salinas-Ruiz, Maria del Mar
Other Authors:	Partridge, Ivana K.
Published:	Cranfield University 2009
Subjects:	671
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.512829

Similar Items

Diffusion bonding aluminium alloys and composites : new approaches and modelling
by: Shirzadi Ghoshouni, Amir Abbas
Published: (1998)

Fatigue and creep of adhesively bonded joints
by: Al-Ghamdi, Abdulhakeem H.
Published: (2004)

Adhesive bonding of metal cutting tools
by: Darwish, S. M. H.
Published: (1986)

Toughening of Epoxy Adhesives by Combined Interaction of Carbon Nanotubes and Silsesquioxanes
by: Giuseppina Barra, et al.
Published: (2017-09-01)

The hot extrolling of aluminium
by: Hatakeyama, K.
Published: (1983)

Friction-stir welding of dissimilar aluminium alloys
by: Peel, Matthew J.
Published: (2005)

Friction stir welding of commercially available superplastic aluminium
by: Minton, Timothy J.
Published: (2010)

Properties and toughening of silica nanoparticle- and carbon nanotube-modified epoxy polymers
by: Hsieh, Tsung-Han
Published: (2011)

Kissing bonds in adhesive joints : a holistic approach for surface chemistry and joint mechanics
by: Jeenjitkaew, Choothum
Published: (2011)

Aluminium-based coatings for cadmium replacement
by: Cardilli, Emanuele
Published: (2008)

Corrosion control of friction stir welded AA2024-T351 aluminium alloys
by: Younes, Yousif Younes Abo
Published: (2010)

Control of springback in the forming of hollow aluminium extrusions
by: Savage, Mark
Published: (2003)

Optimal design of aluminium extrusion dies using a novel geometry based approach
by: Lin, Chao
Published: (2005)

Study of mechanical properties and weld metal porosity on mechanised MIG aluminium alloy 5083 weldments
by: Winarto
Published: (2000)

Single-point diamond dressing of aluminium oxide grinding wheels and its influence on cylindrical grinding
by: Fletcher, Norman P.
Published: (1976)

Squeeze casting of a conventionally wrought aluminium alloy
by: Manson-Whitton, Chris
Published: (2004)

Characterisation of electroless nickel coatings on aluminium and steel substrates
by: Court, Spencer
Published: (2002)

Mechanical behaviour of self-piercing riveted aluminium joints
by: Han, Li
Published: (2003)

Structural changes during hot working of aluminium alloys
by: Beynon, J. H.
Published: (1980)

Simulation of aluminium extrusion process
by: Flitta, Isaac
Published: (2004)

The development of Thick Section Welds and Ultra-Fine Grain Aluminium Using Friction Stir Welding and Processing
by: Ahmed, Mohamed Mohamed Zaky
Published: (2009)

Semi-solid processing of aluminium alloys by rheo-diecasting technology
by: Patel, Jayesh Bhimji
Published: (2005)

Two-hole extrusion and the effects of Mg₂Si, Si and Fe on the extrudability of 6xxx series aluminium alloys
by: Markides, Christopher Andrew
Published: (1999)

Resistance bonding of titanium based aerospace alloys
by: Tuppen, S. J.
Published: (2005)

The sintering and adhesion of ice
by: Hobbs, Peter Victor
Published: (1963)

The Toughening of Epoxy-Rubber Particulate Composites
by: Kunz, S. C.
Published: (1978)

Vanadate - based conversion coatings for the aluminium alloy 2014A - T6
by: Coward, M. I. E.
Published: (2002)

Investigation into aluminium metal spray (AMS) in combination with organic paint systems
by: Sumon, Tanvir Ahmed
Published: (2009)

Characterisation and modelling of toughness in aerospace aluminium alloy friction stir welds
by: Derry, Christopher Graham
Published: (2008)

Variable polarity plasma arc welding of high strength aluminium alloys
by: Serrano, Gabriel L.
Published: (2004)

Experimental simulation of reduction of erosion damage in dies used in aluminium casting
by: Mohammed, Ali
Published: (2013)

Through process modelling of aluminium alloy castings to predict fatigue performance
by: Li, Peifeng
Published: (2006)

Diffusion bonding
by: McKeag, Dennis
Published: (1974)

The development of a wear resistance aluminium bronzes (Cu-Al-Fe) coating
by: Kucita, Pawee
Published: (2016)

Development and application of advanced plasma welding techniques for high strength aluminium alloys
by: Tzevelekos, P.
Published: (1999)

Process monitoring of blanking coarse grained and ultra-fine grained aluminium sheets using force-displacement characteristics and acoustic emission technique
by: Hamid, Hisham
Published: (2010)

The austempering kinetics, microstructure and mechanical properties of spheroidal graphite unalloyed aluminium cast iron
by: Boutorabi, S. M. A.
Published: (1991)

Electrodeposition of nickel coatings on aluminium alloy 7075 through a modified single zincating process
by: Othman, Intan
Published: (2016)

The effect of pulsed bipolar plasma electrolytic oxidation coatings on the mechanical properties of open cell aluminium foams
by: Abdulla, Taha
Published: (2013)

Numerical modelling of the aluminium extrusion process
by: Peng, Zhi
Published: (2005)