Development of a low-grade energy engine with a multi-vane expander as the prime mover

Development of a low-grade energy engine with a multi-vane expander as the prime mover

Bibliographic Details
Main Author:	Badr, O. M.
Published:	Cranfield University 1985
Subjects:	621.4021 Rankine cycle engines
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.482949

Similar Items

Low-grade energy engines
by: Mohey El-Din, K. H.
Published: (1981)

Stirling engine thermometry and heat transfer
by: Dadd, M. W.
Published: (1985)

Stirling engine heat exchanger characteristics
by: Thonger, J. C. T.
Published: (1986)

Heat transfer and thermal stress distribution due to the impact of a high speed jet on a hot surface
by: Rahimi, Mostafa
Published: (2002)

Thermal cycles and HAZ characteristics of single pass welds in HSLA steels
by: Tecco, D. G.
Published: (1985)

An enquiry into gas process asymmetry in Stirling cycle machines
by: Rix, D. H.
Published: (1984)

Measurement, modelling and optimization of three-phase submerged ARC furnaces (SAF)
by: Amadi, Amos
Published: (2012)

Measurement, modelling and optimization of three-phase submerged ARC furnaces (SAF)
by: Amadi, Amos
Published: (2012)

Measurement of thermodynamic properties of oxides of nitrogen in relation to power cycles
by: El-Gizawy, I. G. S.
Published: (1985)

Design of the low power stirling engine : Possible application to irrigation in rural areas of China
by: Li, X.
Published: (1988)

An investigation of some heat transfer and gas flow problems relevant to miniature refrigerators
by: Orlowska, Anna H.
Published: (1985)

Simulation study on the flow field of guide vane and impeller of turbo expander
by: Bingcheng Liu, et al.
Published: (2019-12-01)

Assessment of a District Trigeneration Biomass Powered Double Organic Rankine Cycle as Primed Mover and Supported Cooling
by: Muhammad Tauseef Nasir, et al.
Published: (2021-02-01)

Thermodynamic Study of a Combined Power and Refrigeration System for Low-Grade Heat Energy Source
by: Saboora Khatoon, et al.
Published: (2021-01-01)

Increasing the Energy Efficiency of an Internal Combustion Engine for Ship Propulsion with Bottom ORCs
by: Melchiorre Casisi, et al.
Published: (2020-10-01)

Energy Analysis and Multi-Objective Optimization of an Internal Combustion Engine-Based CHP System for Heat Recovery
by: Abdolsaeid Ganjehkaviri, et al.
Published: (2014-10-01)

Contribution to the Characterization of Scroll Machines in Compressor and Expander Modes
by: Lemort, Vincent
Published: (2008)

White M. T., Read M. G., Sayma A. I. Comparison between single and cascaded organic Rankine cycle systems accounting for the effects of expansion volume ratio on expander performance / trans. from Engl. M. A. Fedorova
by: M. A. Fedorova
Published: (2020-10-01)

HEAT RECOVERY FOR ELECTRICITY GENERATION IN LOW TEMPERATURE POWER CYCLES
by: Mihai Cruceru
Published: (2019-11-01)

Energy, exergy, and economic analysis of a geothermal power plant
by: Hamid Kazemi, et al.
Published: (2018-04-01)

Experimental Investigation of a Small-Scale ORC Power Plant Using a Positive Displacement Expander with and without a Regenerator
by: Peter Collings, et al.
Published: (2019-04-01)

Étude numérique et expérimentale d'un cycle de Rankine-Hirn de faible puissance pour la récupération d'énergie
by: Danel, Quentin
Published: (2016)

Comparison of single and double stage regenerative organic rankine cycle for medium grade heat source through energy and exergy estimation
by: Ghalya Pikra, et al.
Published: (2019-06-01)

Parametric and working fluid analysis of a combined organic Rankine-vapor compression refrigeration system activated by low-grade thermal energy
by: B. Saleh
Published: (2016-09-01)

Performance Analysis of a Reciprocating Piston Expander and a Plate Type Exhaust Gas Recirculation Boiler in a Water-Based Rankine Cycle for Heat Recovery from a Heavy Duty Diesel Engine
by: Gunnar Latz, et al.
Published: (2016-06-01)

Organic Rankine Cycle and its application in renewable power engineering
by: G. V. Belov, et al.
Published: (2014-01-01)

Reciprocating Expander for an Exhaust Heat Recovery Rankine Cycle for a Passenger Car Application
by: Osoko Shonda, et al.
Published: (2012-06-01)

Analysis of factors affecting performance of a low-temperature Organic Rankine Cycle heat engine
by: Kalua, Tisaye Bertram
Published: (2017)

Study on the Characteristics of Expander Power Output Used for Offsetting Pumping Work Consumption in Organic Rankine Cycles
by: Yu-Ting Wu, et al.
Published: (2014-07-01)

Experimental and Potential Analysis of a Single-Valve Expander for Waste Heat Recovery of a Gasoline Engine
by: Wenzhi Gao, et al.
Published: (2016-11-01)

Preliminary Design of Compact Condenser in an Organic Rankine Cycle System for the Low Grade Waste Heat Recovery
by: Roberto Capata, et al.
Published: (2014-11-01)

Potential of waste heat in Croatian industrial sector
by: Bišćan Davor, et al.
Published: (2012-01-01)

Conversion of a scroll compressor to an expander for organic Rankine cycle: modeling and analysis
by: Oralli, Emre
Published: (2011)

FLUOROETHERS AS A WORKING FLUIDS FOR LOW TEMPERATURE ORGANIC RANKINE CYCLE
by: Artemenko S.V
Published: (2014-12-01)

Optimization of Design Pressure Ratio of Positive Displacement Expander for Vehicle Engine Waste Heat Recovery
by: Young Min Kim, et al.
Published: (2014-09-01)

Axial Turbo-Expander Design for Organic Rankine Cycle Waste-Heat Recovery With Comparative Heavy-Duty Diesel Engine Drive-Cycle Performance Assessment
by: Juan Carlos Soldado, et al.
Published: (2021-06-01)

Experimental Research on the Effects of Suction Ports on Twin Screw Expander Performance
by: He, Y., et al.
Published: (2022)

Expander Technologies for Automotive Engine Organic Rankine Cycle Applications
by: Fuhaid Alshammari, et al.
Published: (2018-07-01)

Performance Analysis of the Vehicle Diesel Engine-ORC Combined System Based on a Screw Expander
by: Kai Yang, et al.
Published: (2014-05-01)

Concerning utilization of heat from low-potential sources
by: Alekseenko Sergey V., et al.
Published: (2019-01-01)