The Development of General Shell Finite Elements

The Development of General Shell Finite Elements

Bibliographic Details
Main Author:	Rigby, F. N.
Published:	University of Nottingham 1978
Subjects:	620.110287
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.470496

Similar Items

Finite element dynamic analysis of shell structures
by: Mota Soares, Carlos Alberto
Published: (1976)

Combined finite/discrete element analysis of impact loading of composite shells
by: Mohammadi Touchaei, S.
Published: (1998)

Static and dynamic analysis of axisymmetrical thin-shell structures by a mixed method of finite element formulation
by: Trbojevic, V. M.
Published: (1976)

Bifurcation of spherical and cylindrical shells at finite deformation
by: Haughton, D. M.
Published: (1979)

Boundary element analysis of spherical and radome shells
by: Karamanoglu, Mehmet
Published: (1992)

Finite element analysis of structured media
by: Lee, J.-S.
Published: (1993)

The finite element method applied to plate flexure
by: Butlin, G. A.
Published: (1967)

Finite element analysis in metal forming processes
by: Zhang, W.-C.
Published: (1987)

Micromechanical finite element analysis of composite materials
by: Wongsto, Anchana
Published: (2003)

A finite element analysis of shrinkage stresses in building materials
by: Thomas, H. R.
Published: (1981)

Finite element analysis of fatigue damage of composite laminated structures
by: Hegaze, Moutaz Mohamed Ebrahim
Published: (2002)

Three dimensional finite element analysis of pile groups and piled-rafts
by: Wang, A.
Published: (1996)

Aspects of large strain membrane analysis using the finite element method
by: Mahaney, J. M.
Published: (2002)

Elastic-plastic bending analysis of plates and slabs by the finite element method
by: McNeice, Gregory Malcolm
Published: (1967)

A finite element procedure for assessing continuous flaws in clad pressure vessels
by: Balasubramaniam, Krishna
Published: (1985)

A finite element method for the stress analysis of plane thermo-viscoelastic bodies
by: Srinatha, H. R.
Published: (1982)

Use of constraint matrices in the finite element method and the stress analysis of complex rotating structures
by: Roy, S. K.
Published: (1973)

Large deflection phenomena in cylindrical shells
by: Holst, J. M. F. G.
Published: (1996)

Elastic-plastic finite element analysis of flat plates with projections subjected to axial and shear loading
by: Pipelzadeh, M. K.
Published: (1993)

Fracture toughness parameters and elastic plastic analysis of non-moderate fracture conditions using finite element methods
by: Anderson, D. M.
Published: (1972)

Bistable structures for morphing applications using anisotropic shells
by: Pirrera, Alberto
Published: (2011)

The influence of internal pressure on the bending stability of thin cylindrical shells
by: Coutie, Martin George
Published: (1960)

Buckling of cylindrical shells under non-uniform lateral pressures
by: Prabhu, Kundurpi S.
Published: (1975)

Limit state analysis : adaptive finite element upper and lower bound approach to the evaluation of the limit load of a Von Mises rigid-plastic material body in plane stress
by: Cordero, Raymundo
Published: (2005)

Buckling strength of steel thin cylindrical shells under elevated local axial compression
by: Cai, Minjie
Published: (2003)

Probabilistic fracture mechanics by boundary element method
by: Huang, Xiyong
Published: (2010)

An Analysis of Stresses Associated with Profiled Cylindrical Rolling Elements
by: Banerjee, P.
Published: (1971)

Approximate theories for the flexural vibration of uniform beams and their derivation from the general elastic equations
by: Barr, A. D. S.
Published: (1956)

Finite element analysis of axisymmetric cracked solids
by: Alsharqi, Ihsan A.
Published: (1977)

Finite element analysis of composites integral armour
by: El-Habti, Mohamed
Published: (2010)

Application of the finite element method to problems in fracture mechanics
by: Wood, Peter C.
Published: (1979)

On the stress analysis of cracked bodies by means of finite elements
by: Robertson, A. W.
Published: (1976)

Application of the finite element method to the design of disc type wheels
by: Woo, C. W.
Published: (1971)

Application and Development of the Method of Boundary Collocation to Problems in Elasticity
by: Demunshi, G.
Published: (1977)

Development of techniques for lifetime prediction of polyethylene resins for the water and gas industry
by: Atteck, James Alexander Charles
Published: (2009)

The development of a new compression test specimen design for thick laminate composites
by: Dogra, Jasween
Published: (2011)

Development of mechanical reliability testing techniques with application to thin films and piezo MEMS components
by: Gkotsis, Petros
Published: (2010)

The development of J-integral estimation schemes for shallow cracked geometries under large plastic deformation
by: Lau, C. L.
Published: (1995)

Development of a micromechanical characterisation process for thin film MEMS materials and its application to electro-thermal actuators
by: He, J. H.
Published: (2004)

Development of an engineering assessment procedure for predicting cleavage fracture from non-sharp defects using the failure assessment diagram
by: Horn, Anthony John
Published: (2010)