A generic procedure for mould material thermal behaviour modelling using finite element simulation of hybrid plastic injection moulds

A generic procedure for mould material thermal behaviour modelling using finite element simulation of hybrid plastic injection moulds

Bibliographic Details
Main Author:	Cardon, Ludwig Kamiel Stefan
Published:	Birmingham City University 2005
Subjects:	668.4120151825
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.435526

Similar Items

Screw plasticating in the injection moulding of thermoplastics
by: Nunn, Robert Eric
Published: (1975)

Modelling and Computer Control of the Plastics Injection Moulding Process
by: Battye, P. G.
Published: (1977)

Investigation and modelling of release behaviour of polymer moulds for polyurethane foam moulding
by: Majewski, Candice
Published: (2007)

Rheological and curing characteristics of thermosetting plastics as related to injection moulding
by: Paul, K. T.
Published: (1976)

Computer aided design of preforms for injection blow moulded plastic containers
by: McEvoy, James
Published: (1996)

Injection moulding of thermoplastic polymers
by: Soo, Y. S.
Published: (1982)

Process Parameters Optimisation of Injection Moulding using SLA Inserts in Conventional & CCC Moulds
by: Alenezi, Dharay Falah Saleh
Published: (2010)

Modelling and optimising of reaction injection moulding
by: Dos Santos Mateus, Artur Jorge
Published: (2011)

From reaction injection moulding to microdevices
by: Almanza Arjona, Yara Cecilia
Published: (2008)

Fibre orientation in injection moulded composites
by: Bubb, Simon Lawrence
Published: (1988)

Study of fluid flow and heat transfer during mould filling in injection moulding of rubber compounds
by: Barel, M.
Published: (1979)

The reduction of cycle times in the rotational moulding of plastics
by: McDowell, G. W. G.
Published: (2002)

Modelling of the rotational moulding process for the manufacture of plastic products
by: Lim, Kok Khoon
Published: (2003)

Computer monitoring and analysis of thermoset injection moulding
by: Sharp, D. A.
Published: (1986)

Copolyureas formed by reaction injection moulding, RIM
by: Birch, Adrian John
Published: (1991)

Microstructure and physical property control of injection moulded polypropylene
by: Kalay, Guerhan
Published: (1994)

Residual stresses and fracture in nylon-6 injection mouldings
by: Russell, D. P.
Published: (1976)

The structure and performance of injection moulded metallocene catalysed polyethylenes
by: Walker, S. E. M.
Published: (2003)

Sandwich injection moulding with thermoset materials
by: Kiatmanaroj, Subongkoj
Published: (2004)

Rotational moulding of a class A finish on plastic parts
by: O'Brien, E.
Published: (2002)

Influence of process-induced stresses on the mechanical behaviour and dimensional stability of thermoplastic injection mouldings
by: Ozden, Sedat
Published: (1994)

Process and production measurements for automatic inspection and control of injection moulding
by: Dawson, A. J.
Published: (1999)

The characteristics fo flowing polymer melts in the injection moulding process
by: Sombatsompop, Narongrit
Published: (1997)

Origins of distortion in injection moulded nylon 6,6
by: Paterson, Mark W. A.
Published: (1989)

Controlling the morphology of parts produced by stereolithography injection moulds
by: Harris, Russell A.
Published: (2002)

Assessment of fracture toughness for polyethersulphone injection mouldings
by: Whitehead, Richard Donaldson
Published: (1988)

Prediction and characterization of compression mould flow for unsaturated polyester resin sheet moulding compound
by: Silva-Nieto, R. J.
Published: (1980)

Morphology and properties of nylon 66 : effects of injection moulding on structure and performance
by: Jackson, Victor S.
Published: (1973)

Effect of Magnetic Field on the Alignment and Orientation of Magnetic Particles in Injection moulding
by: Ogur, Erich Okoth
Published: (2007)

Visual analysis and diagnosis system for injection moulded components
by: Marsh, Robert
Published: (2002)

The injection moulding of long glass fibre reinforced thermoplastic materials
by: McClelland, Alan Nigel Robert
Published: (1988)

Reducing cycle times in rotational moulding of plastics : a theoretical and experimental analysis
by: Khouri, R. M.
Published: (2004)

Investigation of lthe mechanical properties of injection moulded parts produced with rapid tooling
by: Segal, Joel
Published: (2004)

Preferred fibre orientation in the injection moulding of polyester thermosets
by: Gibson, John Robert
Published: (1988)

The prediction of fibre orientation in short fibre reinforced thermoplastic injection mouldings
by: Cushley, Anna T.
Published: (1990)

Relationships between micromorphology and impact properties of injection moulded isotactic polypropylene
by: Murphy, M. W.
Published: (1986)

Accelerated Cooling of Thermoplastic in Rotational Moulding
by: Tan, S. B.
Published: (2010)

Monomer transfer moulding for biodegradable composites
by: Jiang, Guozhan
Published: (2004)

Rotational moulding of cross-linked polyethylene
by: Soares, R. J. M.
Published: (2002)

Structure-property relationships in reaction injection moulded polymers and polymer composites : Structure-property studies of reaction injection moulded polyurethanes, polyesters, polyacrylates and novel acrylic-urethane blends and of composites of these
by: Leadbitter, J.
Published: (1988)

Cannot write session to /tmp/vufind_sessions/sess_r00pfm823uevs1elen8l9d8gfj