Studies in powder injection moulding with a PEG-PMMA composite binder using Fe-50% Ni, Fe3%Si and Fe-7%Si soft magnetic alloy powders

Studies in powder injection moulding with a PEG-PMMA composite binder using Fe-50% Ni, Fe3%Si and Fe-7%Si soft magnetic alloy powders

Bibliographic Details
Main Author:	Gutierrez Ladron de Guevara, Luis A.
Published:	University of Sheffield 2005
Subjects:	671.37
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.419566

Similar Items

Modelling powder compaction and breakage of compacts
by: Shang, Chenglong
Published: (2012)

The manufacture and characterisation of aluminium foams made by investment casting using dissolvable spherical sodium chloride bead preforms
by: Jinnapat, Apichart
Published: (2011)

Hydratable alumina for refractory castable systems
by: Fletcher, Helen Lucy
Published: (2002)

Vibration analysis of spinning discs in centrifugal atomization
by: Deng, Huaxia
Published: (2011)

The effect of pulsed bipolar plasma electrolytic oxidation coatings on the mechanical properties of open cell aluminium foams
by: Abdulla, Taha
Published: (2013)

Laser free form fabrication applied to the manufacture of metallic components
by: Fearon, Eamonn Patrick
Published: (2002)

Investigation of residual stresses in the laser melting of metal powders in additive layer manufacturing
by: Roberts, Ibiye Aseibichin
Published: (2012)

Powder co-injection moulding
by: Hanson, S. M. J.
Published: (2000)

The secondary machining of Fe-Cu-C ferrous powder metallurgy compacts by turning, boring and drilling
by: Smith, Graham T.
Published: (1996)

Two-hole extrusion and the effects of Mg₂Si, Si and Fe on the extrudability of 6xxx series aluminium alloys
by: Markides, Christopher Andrew
Published: (1999)

Error awareness : assessment and changes with normal ageing
by: Radley, Kate A.
Published: (2005)

Powder injection moulding of WC-Co hardmetal using a PEG/PMMA Binder
by: Chuankrerkkul, Nutthita
Published: (2006)

Application of conventional machining techniques for green ceramic compacts produced by powder reaction moulding
by: Ng, Siak Hong
Published: (2005)

The continuous compaction of metal powders
by: Evans, Peter Eric
Published: (1956)

FE modelling and model updating of laser weld joints
by: Abu Hussain, Nurulakmar
Published: (2010)

Élaboration de composites Al/B4C pour application de protection balistique
by: Queudet, Hippolyte
Published: (2017)

Powders prepared from Fe-Si-B-Cu-Nb ribbons and forming by SWAP Fe-Si-B-Cr-C powders
by: Shih-Han Huang, et al.
Published: (2013)

Low power laser sintering of iron powder
by: Dhavale, Tushar
Published: (2009)

Metal powder effects on selective laser sintering
by: Eane, Radu Bogdan
Published: (2002)

Interfacial coefficients in powder metal compaction
by: Mallender, Richard F.
Published: (1974)

The development of a wear resistance aluminium bronzes (Cu-Al-Fe) coating
by: Kucita, Pawee
Published: (2016)

Élaboration de composites base magnésium pour des applications d’allègement de structures et de protection balistique dans le secteur des transports
by: Mondet, Mathieu
Published: (2017)

Effect of Initial Powders on Properties of FeAlSi Intermetallics
by: Jaroslav Čech, et al.
Published: (2019-09-01)

3D FE simulation of the welding process to optimise residual stress profiles in complex geometries
by: Jiang, Wei
Published: (2006)

Mechanically strong nanocrystalline Fe-Si-B-P-Cu soft magnetic powder cores utilizing magnetic metallic glass as a binder
by: Jian Luan, et al.
Published: (2016-05-01)

Selective laser sintering of a stainless steel powder
by: Hauser, Carl
Published: (2003)

Some aspects of the cold compaction behaviour of metal powders
by: James, Peter J.
Published: (1976)

Powder Metallurgy: An Alternative for FeMnSiCrNi Shape Memory Alloys Processing
by: Bogdan Pricop, et al.
Published: (2020-07-01)

An investigation of type 2 superconductivity using powder metallurgy techniques
by: Bibby, Geoffrey Walton
Published: (1970)

Moldability of nano size zirconia for powder injection molding process by using PEG and PMMA binders
by: Al Basir, et al.
Published: (2020)

Study of fundamental laser material interaction parameters in solid and powder melting
by: Ayoola, Wasiu Ajibola
Published: (2016)

Mechanosynthesis of Composite Fe/SiC Powders for Magnetic Abrasive Treatment
by: Petr A. Vityaz, et al.
Published: (2016-03-01)

Magnetic Properties of Fe-B-Si-Cr Amorphous Powder and Ni–Zn Ferrite Particles Composite
by: Szu-Fan Yao, et al.
Published: (2013)

On the Free Recovery Bending Shape Memory Effect in Powder Metallurgy FeMnSiCrNi
by: Lenuța CIURCĂ, et al.
Published: (2021-09-01)

Some aspects of the roll compaction of strip from iron powder by the BISRA process
by: Donnelly, Martin
Published: (1975)

The development of robotic polishing for steel moulds
by: Speich, Marco
Published: (2014)

Deposition and characterization of boron-based coatings by sputtering from loosely-packed powder targets
by: Audronis, Martynas
Published: (2007)

Study of sodium silicate insulation treatment for Fe-Si-Cr alloy powder
by: 張軒耀, et al.
Published: (2014)

Characterization of Al-doped FeSi2 Powders Annealed in Forming Gas
by: Chung-Ming Li, et al.
Published: (2007)

Relationship between the microstructure and magnetic properties of Fe-Si-Cr powder cores
by: Kuan-TingHo, et al.
Published: (2016)