Impact resistance of masonry walls : materials characterisation & numerical modelling

Impact resistance of masonry walls : materials characterisation & numerical modelling

Bibliographic Details
Main Author:	Burnett, Steven
Published:	University of Sheffield 2003
Subjects:	690.12
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.412723

Similar Items

The application of finite element analysis to the design of embedded retaining walls
by: Woods, Richard Ian
Published: (2003)

Seismic behaviour of reinforced concrete walls with low shear ratio
by: Lopes, Mario Manuel Paisana dos Santos
Published: (1991)

The performance of double skin facades in office building refurbishment in hot arid areas
by: Hamza, Neveen Ahmed
Published: (2004)

Post-buckling of truss-lattice shear panels
by: Williams, Ashley Philip
Published: (2007)

Ενίσχυση φέρουσας τοιχοποιίας για εντός επιπέδου φόρτιση με σύνθετα υλικά ανόργανης μήτρας και με ράβδους σύνθετων υλικών σε εγκοπές
by: Κάρλος, Κυριάκος
Published: (2007)

Numerical modelling of workmanship in masonry structures
by: Fyfe, A. G.
Published: (2000)

Numerical modelling of frost damage to masonry
by: Kralj, B.
Published: (1997)

Studies relating to structural masonry
by: Sinha, B. P.
Published: (1997)

Structural behaviour of historic masonry cross vaults
by: Theodossopoulos, Dimitrios
Published: (2002)

Structural design and analysis of masonry buildings using thin joint mortar
by: Ali, Jabbar Talib
Published: (2009)

Application of stiffness/strength corrector and cellular automata in predicting response of laterally loaded masonry panels
by: Zhou, Guang Chun
Published: (2002)

A knowledge based system to predict the lateral failure pressure of masonry panels under biaxial bending
by: Mathew, Anu
Published: (1999)

On the design of masonry shell structures
by: Torpiano, A.
Published: (1987)

Field studies, analysis and numerical modelling of retaining walls embedded in weak rock
by: Hayward, Toby
Published: (2000)

The development and characterisation of breathable concrete
by: Wong, Jim Min
Published: (2007)

Characterising the performance of light pipes for use in offices in UK climate
by: Yohannes, Iyassu
Published: (2001)

Investigation and development of hybrid ventilation wall convector
by: Turner, William J. N.
Published: (2009)

The impact of construction and building materials on energy consumption on Saudi residential buildings
by: Lasker, Wasim Jamil A.
Published: (2016)

A study of staggered and shear-wall tall building systems
by: McKenzie, William M. C.
Published: (1976)

Investigations into mitigating the heat island effect through green roofs and green walls
by: Alexandri, Eleftheria
Published: (2006)

A critical investigation into the use of industrialised prefabricates in the external walling of low cost housing
by: Clark, P. L.
Published: (1978)

Failure Behaviour of Masonry under Compression Based on Numerical and Analytical Modeling
by: Michel, Kenan
Published: (2017)

Numerical simulation of separated flow over flexible structural membranes
by: Matthews, Lisa Ann
Published: (2007)

Knowledge-based decision support system for multi criteria roofing material selection and cost modelling
by: Rahman, Sazzadur
Published: (2010)

Mathematical and laboratory modelling of ventilation
by: Sandbach, Steven D.
Published: (2009)

The hydraulic properties of asphalt materials
by: Nursetiawan, Nursetiawan
Published: (2009)

Closed loop material cycle construction : defining and assessing closed loop material cycle construction as a component of a comprehensive approach to sustainable material design in the context of sustainable building
by: Sassi, P.
Published: (2009)

Influence of backing material on sealed joint performance
by: Iglauer, Stefan
Published: (2002)

Use of waste and low energy materials for construction
by: Yalley, Peter Paa-Kofi
Published: (2008)

A technological and economic assessment of housebuilding materials
by: Fitzpatrick, D. J.
Published: (1977)

The application of electrokinetic geosynthetic materials to uses in the construction industry
by: Pugh, Robert Colin
Published: (2002)

Approximate analysis of core walls
by: Megson, T. H. G.
Published: (1981)

An environmental and material flow analysis of the UK steel construction sector
by: Ley, J. D.
Published: (2004)

In situ measurements of building materials using a thermal probe
by: Pilkington, Brian
Published: (2008)

Caractérisation, analyse et modélisation des échanges énergétiques entre un mur végétalisé intensif et son environnement
by: Kenaï, Mohamed Amine
Published: (2016)

Sound insulation of brick diaphragm walls
by: Sullivan, Rory Daniel
Published: (1994)

The racking resistance of timber frame walls assessed by experimental and analytical techniques
by: Griffiths, D. Robert
Published: (1987)

Impact Noise in Buildings
by: McIntosh, J.
Published: (1976)

Artificial hydraulic lime mortar obtained by calcining limestone and siliceous waste materials
by: Zawawi, Rodiah
Published: (2010)

Solar thermal storage using phase change material for space heating in residential buildings
by: Gates, Jonathan Roger
Published: (2009)