Experimental, analytical and computational studies in resin transfer moulding

Experimental, analytical and computational studies in resin transfer moulding

Bibliographic Details
Main Author:	McCallum, Stuart Craig
Published:	Imperial College London 2003
Subjects:	668.37
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.406353

Similar Items

Controlled porosity alginate hydrogels from emulsion templating techniques
by: Partap, Sonia
Published: (2006)

Glucose production in the ultrafiltration system and cell-free xanthan gum production
by: Sarbatly, Rosalam
Published: (2006)

Investigation of flow perameters in resin transfer moulding
by: Kiuna, Ngugi
Published: (2003)

Permeability identification of porous media in resin transfer moulding
by: Xing, Jun
Published: (2001)

The application of microwave preheating in resin transfer moulding
by: Johnson, Michael S.
Published: (1995)

Prediction and characterization of compression mould flow for unsaturated polyester resin sheet moulding compound
by: Silva-Nieto, R. J.
Published: (1980)

Study of fluid flow and heat transfer during mould filling in injection moulding of rubber compounds
by: Barel, M.
Published: (1979)

Analysis of the cure of polyester resins and sheet moulding compounds
by: Nixon, J. A.
Published: (1984)

Monomer transfer moulding for biodegradable composites
by: Jiang, Guozhan
Published: (2004)

The effect of the structural parameters of polyester resins on the mechanical properties of polyester moulding compounds
by: Rhoades, G. V.
Published: (1979)

Computer aided design of preforms for injection blow moulded plastic containers
by: McEvoy, James
Published: (1996)

Modelling and Computer Control of the Plastics Injection Moulding Process
by: Battye, P. G.
Published: (1977)

Computer monitoring and analysis of thermoset injection moulding
by: Sharp, D. A.
Published: (1986)

A study of heat transfer and process control in the rotational moulding of polymer powders
by: Nugent, Paul James
Published: (1990)

Investigation and modelling of release behaviour of polymer moulds for polyurethane foam moulding
by: Majewski, Candice
Published: (2007)

Reducing cycle times in rotational moulding of plastics : a theoretical and experimental analysis
by: Khouri, R. M.
Published: (2004)

Preparative analytical and physiochemical studies of urea- formaldehyde resins and foam insulants
by: Taylor, R.
Published: (1982)

Process Parameters Optimisation of Injection Moulding using SLA Inserts in Conventional & CCC Moulds
by: Alenezi, Dharay Falah Saleh
Published: (2010)

Studies on the rotational moulding of nanoclay filled polyethylene and polyethylene
by: Hanna, Paul R. W.
Published: (2013)

Modelling and optimising of reaction injection moulding
by: Dos Santos Mateus, Artur Jorge
Published: (2011)

From reaction injection moulding to microdevices
by: Almanza Arjona, Yara Cecilia
Published: (2008)

Accelerated Cooling of Thermoplastic in Rotational Moulding
by: Tan, S. B.
Published: (2010)

Fibre orientation in injection moulded composites
by: Bubb, Simon Lawrence
Published: (1988)

Rotational moulding of cross-linked polyethylene
by: Soares, R. J. M.
Published: (2002)

Screw plasticating in the injection moulding of thermoplastics
by: Nunn, Robert Eric
Published: (1975)

The reduction of cycle times in the rotational moulding of plastics
by: McDowell, G. W. G.
Published: (2002)

An investigation of the rotational moulding of foamed metallocene polyethylenes
by: Archer, Edward Victor
Published: (2003)

An investigation into the barrier properties of blow moulded containers
by: Rotherham, J.
Published: (2005)

A generic procedure for mould material thermal behaviour modelling using finite element simulation of hybrid plastic injection moulds
by: Cardon, Ludwig Kamiel Stefan
Published: (2005)

Injection moulding of thermoplastic polymers
by: Soo, Y. S.
Published: (1982)

Modelling of the rotational moulding process for the manufacture of plastic products
by: Lim, Kok Khoon
Published: (2003)

The structure and performance of injection moulded metallocene catalysed polyethylenes
by: Walker, S. E. M.
Published: (2003)

Microstructure and physical property control of injection moulded polypropylene
by: Kalay, Guerhan
Published: (1994)

Print and film deformation during the in-mould decoration process
by: Phillips, C. O.
Published: (2004)

The effect of mould temperature on properties of flexible PU foam
by: Abdul-Rani, Ahmad Majdi
Published: (2006)

Residual stresses and fracture in nylon-6 injection mouldings
by: Russell, D. P.
Published: (1976)

Processing and properties of polyester moulding compounds
by: Lamb, D. W.
Published: (1985)

The injection moulding of long glass fibre reinforced thermoplastic materials
by: McClelland, Alan Nigel Robert
Published: (1988)

Process and production measurements for automatic inspection and control of injection moulding
by: Dawson, A. J.
Published: (1999)

The characteristics fo flowing polymer melts in the injection moulding process
by: Sombatsompop, Narongrit
Published: (1997)

Cannot write session to /tmp/vufind_sessions/sess_1mo2b800vggnosnfpb86quoi68