Control of springback in the forming of hollow aluminium extrusions

Control of springback in the forming of hollow aluminium extrusions

Bibliographic Details
Main Author:	Savage, Mark
Published:	University of Warwick 2003
Subjects:	671.3
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.402996

Similar Items

Structural changes during hot working of aluminium alloys
by: Beynon, J. H.
Published: (1980)

The pressure distribution and coefficient of friction on the container wall during the process of forward extrusion of metals
by: Elbehery, A. M.
Published: (1963)

The austempering kinetics, microstructure and mechanical properties of spheroidal graphite unalloyed aluminium cast iron
by: Boutorabi, S. M. A.
Published: (1991)

Cold roll forming
by: Sarantidis, T. M. S.
Published: (1977)

Non-symmetric sheet metal forming processes
by: Duncan, John Leask
Published: (1968)

Modelling of oxide failure in hot metal forming operations
by: Trull, Mikhail
Published: (2003)

The press forming behaviour of austenitic and metastable stainless steels
by: Griffiths, A. J.
Published: (1967)

A study into the 2D and 3D laser forming of metallic components
by: Edwardson, Stuart Paul
Published: (2004)

The mechanics and control of flexible asymmetric spinning
by: Polyblank, James Alexander
Published: (2015)

Supervisory control of rolling mills : the optimisation of soaking pit schedules
by: Ozen, Turhan
Published: (2002)

Development of control strategies for a hot strip rolling mill
by: Leigh, James Ronald
Published: (1969)

Optimised control of the machining of a non-homogeneous steel workpiece using in-process tool wear rate measurement
by: Hinds, Brendan Kieran
Published: (1970)

The electrochemistry of electrochemical machining
by: Howarth, Paul
Published: (2003)

Ultrashort pulse laser micromaching of metallic materials
by: Zhang, Wei
Published: (2012)

The mechanics of the shot-peening process
by: Abdel-Meguid, S. A.
Published: (1975)

Analysis of cold rolling with particular reference to roll deformations
by: Golten, Jack Winston
Published: (1969)

3-D simulation of the fullering process in hot forging
by: Fereshtehi-Saniee, Faramarz
Published: (1997)

Investigations into the rolling of thick and thin walled profiled rings
by: Salimi, M.
Published: (1988)

The identification and modelling of the dominant failure mode in hot forging tooling
by: Anderson, Magnus
Published: (2013)

Annealing behaviour of shock deformed copper and iron
by: Chojnowski, Edmundo Antonio
Published: (1969)

An atomistic investigation on the nanometric cutting mechanism of hard, brittle materials
by: Goel, Saurav
Published: (2013)

An electrical resistance workpiece heating technique for hot machining
by: Barrow, G.
Published: (1965)

Effect of surface roughness on quality perception of Laser Sintered (LS) parts
by: Lestrange, Charis
Published: (2016)

A study of emissions during iron ore sintering
by: Piotr, Markwordt
Published: (2013)

Direct and indirect laser sintering of metals
by: Dewidar, Montasser Marasy A.
Published: (2002)

Investigation into the grinding of titanium alloys
by: Wang, S. H.
Published: (2000)

The stability of fixed and floating plugs in the tube drawing process
by: Jones, R.
Published: (1978)

An investigation into some aspects of electrochemical machining processes
by: Baldwin, G. L.
Published: (1968)

An experimental investigation into the honing process
by: Wooldridge, D.
Published: (1962)

High speed drawing of metals
by: Baxter, Roger Sydney
Published: (1968)

An investigation into the problem of measuring the temperature distribution of the rake-face of a cutting tool
by: Qureshi, A. H.
Published: (1965)

The tool/workpiece construction resistance and its application to the in-process measurement of tool wear
by: Myers, Stephen
Published: (1972)

High precision laser micromachining for sensing applications
by: Albri, Frank
Published: (2014)

The development of an expert system and adaptive process models for hot mill setup
by: Robinson, Ian
Published: (1997)

Utilisation of chip thickness models in grinding
by: Singleton, Roger
Published: (2012)

Development of a novel electrophotographic additive layer manufacturing machine
by: Benning, Matthew James
Published: (2012)

An investigation of type 2 superconductivity using powder metallurgy techniques
by: Bibby, Geoffrey Walton
Published: (1970)

An investigation relating to double margin drill performance and flank face geometry
by: Billau, Douglas James
Published: (1977)

Analysis of material deformation and wrinkling failure in conventional metal spinning process
by: Wang, Lin
Published: (2012)

Prediction of temperatures in orthogonal machining using finite element method
by: Murarka, P. D.
Published: (1977)