The application of the three-point bend test to predict rock mechanics and breakage parameters

The application of the three-point bend test to predict rock mechanics and breakage parameters

Bibliographic Details
Main Author:	Campbell, Paul
Published:	University of Birmingham 2002
Subjects:	624.15132
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.396456

Similar Items

The computer simulation and prediction of rock fall
by: Ashfield, James Richard
Published: (2001)

A novel surface data labelling algorithm and example applications of it in rock mechanics
by: Ward, Timothy David Fraser
Published: (2004)

Numerical modelling of mechanical and hydraulic behaviour of fractured rock
by: Zhang, Xing
Published: (2002)

Changes in rock mechanics properties due to formation damage
by: Mendez Casal, M. J.
Published: (2004)

A study of stress dependent stiffness of rock using the multistage triaxial test
by: Dweirj, Mohammad Kh
Published: (2006)

Modelling polymer-gel based water shutoff in fractured rock at the microscopic scale
by: Moosa, Riyadh M. B.
Published: (2003)

A methodology for the detection of discontinuity traces in digital images of rock mass exposures
by: Reid, Trevor Raymond
Published: (1998)

Numerical and experimental study of fluid flow in a rough-walled rock fracture
by: Al-Yaarubi, Azzan H. B.
Published: (2003)

The evolution of the brittle deformation process in uniaxial compression
by: Chilton, J. L.
Published: (2005)

Analytical and experimental study of the poroelastic behaviour of clean and clay-rich sandstones
by: Al Wardy, Widad Mohammad Hasan
Published: (2003)

Numerical simulation of the dynamic impact breakage testing of rock
by: Vanichkobchinda, Pongtana
Published: (2005)

An analysis of rock breakage by high voltage electrical discharges
by: Kennedy, P. A.
Published: (1971)

Investigation of rockfall and slope instability with advanced geotechnical methods and ASTER images
by: Sengani, Fhatuwani
Published: (2021)

Mechanics of rock indentation and its application to cutter performance prediction
by: Mbulo, Thandi Jerry
Published: (2002)

Fracture mechanics and its application in rock excavation
by: Xu, Chaoshui
Published: (1993)

The Application of Mathematical Models to Rock Mechanics Problems
by: Budavati, S.
Published: (1968)

Development and application of extensometry techniques in rock mechanics investigations
by: Aziz, N. I.
Published: (1978)

A proposed framework for characterising uncertainty and variability in rock mechanics and rock engineering
by: Bedi, Anmol
Published: (2014)

Modal interactions in bending and buckling of sandwich structures
by: da Silva, Luis Alberto Proenca Simoes
Published: (1989)

The mechanical and cutting properties of rocks related to the application of tunnel boring machines
by: Suwannapinij, Sompop
Published: (1975)

An Investigation into the Mechanical Behaviour of In-Situ Rock Masses
by: Holister, G. S.
Published: (1966)

Rock Mechanics Investigations Relating to Tunnelling in Chalk
by: Reid, A. G.
Published: (1979)

The mechanics and dynamics of certain rock fracture modes
by: Swan, G.
Published: (1974)

A critical state approach to rock mechanics
by: Gerogiannopoulos, N. G.
Published: (1977)

Studies of The Fracture Mechanisms of Rock Under Three- Point-Bend
by: Sung Huan Wen, et al.
Published: (1994)

An investigation of the failure mechanism of a carbon fibre reinforced composite material in bending
by: Maybury, Alan
Published: (1973)

A Photoelastic and Field Investigation into the Interface Problem in Rock Mechanics
by: Nasuf, S. E.
Published: (1977)

The application of two-and-three-dimensional stress analysis techniques to the design of rock structures, with particular reference to underground pillars
by: Karmis, M.
Published: (1974)

Fundamental Behaviour in Bending and Shear of Reinforced Concrete
by: Taylor, H. P. J.
Published: (1971)

Length effects in elastic imperfect cylindrical shells under uniform bending
by: Fajuyitan, Oluwole Kunle
Published: (2018)

An investigation into the mechanical cutting of rock materials with particular reference to fracture mechanics
by: Cheraghi Seifabad, Masoud
Published: (1992)

Investigations into the mechanical cutting characteristics of some medium and high strength rocks
by: Bilgin, Nuh
Published: (1977)

The redistribution of bending moment in continuous prestressed concrete beams
by: Bennett, Ernest Walter
Published: (1961)

The distribution of bending moments in a flat slab with openings
by: Neogi, B. C.
Published: (1972)

The effect of stiffener dimensions on the buckling of webplates subjected to bending
by: Corney, Gerald
Published: (1959)

Rock mechanics investigations associated with shaft excavations in a deep evaporite deposit
by: Cook, R. F.
Published: (1974)

Deformation behaviour of beams reinforced with fibre reinforced polymer bars under bending and shear
by: Yang, Fang
Published: (2015)

Behaviour of stainless steel and cold C sections with large web openings in bending and shear
by: Basta, Antoine
Published: (2017)

Analysis of oblique bending in crimped U-profile pile pairs
by: Crawford, Richard John
Published: (2003)

Coupling between torsional and bending modes of vibration in cantilever beams
by: Armstrong, G.
Published: (1972)