A study of the accretion of contaminants on mass standards by gravimetric and XPS techniques

A study of the accretion of contaminants on mass standards by gravimetric and XPS techniques

Bibliographic Details
Main Author:	Davidson, Stuart
Published:	University of Surrey 2001
Subjects:	669
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.395550

Similar Items

The application of XPS to the study of the passive layers formed on metals in aqueous conditions
by: Clayton, C. R.
Published: (1976)

Accretion growth and slag-metal reactions in injection metallurgy
by: Ohguchi, S.
Published: (1983)

Reducing zinc contamination in basic oxygen steelmaking dust
by: Heinrich, Tobias
Published: (2016)

On the annealing of standard nickel silvers
by: Dowson, Arthur Gordon
Published: (1937)

Corrosion monitoring in hydrocarbon and aqueous systems contaminated by the sulphate-reducing bacteria, using the AC impedance technique
by: Merrique, J. L.
Published: (1986)

Heat and mass transfer in solidification cladding
by: Silisan, Akin
Published: (1975)

Studies of copper trafficking proteins from Bacillus subtilis by native mass spectrometry
by: Kay, Kristine
Published: (2016)

Heat and mass transfer in the decomposition of calcium carabonate
by: Paulin, Andrej
Published: (1968)

Cavitation of superplastic alloys : a study using a hot microhardness technique
by: Sohal, Gurnam Singh
Published: (1980)

The assessment of the Purser furnace as an experimental techniques and its relevance in the study of fire
by: Lowens, Judith Mary
Published: (2001)

The application and development of novel TEM techniques to the study of Pt catalyst particles
by: Cervera Gontard, Lionel
Published: (2007)

Recrystallisation of low carbon steels containing niobium
by: Davidson, Alexander Philip
Published: (1973)

Application of a surface displacement mapping technique to materials problems
by: Chivers, Katharine Felicity
Published: (2000)

Chemical Mapping Techniques for Nanoscale Multilayer Coatings
by: Yajid, Muhamad Azizi Mat
Published: (2009)

Fabrication of Composite Materials by Explosive Compaction Techniques
by: Bhalla, A. K.
Published: (1975)

Non-standard anodisation processes for the pretreatment of structurally bonded aluminium alloys
by: Cartwright, Tim
Published: (2005)

Non-standard anodisation processes for the pretreatment of structurally bonded aluminium alloys
by: Cartwright, Tim
Published: (2005)

Scratch resistant coatings produced by sol-gel techniques
by: Parry, Glenn Charles
Published: (2001)

CTOA measurements in aluminium alloys using direct techniques
by: Tai, Y. H.
Published: (2008)

Extracting reliable mechanical properties using the nanoindentation technique
by: Moharrami, Noushin
Published: (2014)

The measurement of toughness in ferritic steels using miniature test techniques
by: Norris, S. D.
Published: (1995)

The effect of grain refiners on intermetallic phase selection in 6XXX series Al alloys
by: Davidson, Ian
Published: (2006)

Energy-filtered imaging in the transmission electron microscope : novel techniques and applications
by: Thomas, Paul James
Published: (2000)

Corrosion fatigue initiation in stainless steels : the scanning reference electrode technique
by: Gonzalez-Sanchez, Jorge A.
Published: (2002)

Investigation of infrared thermography NDE techniques for use in power station environments
by: Weekes, Benjamin David
Published: (2011)

Using new and novel techniques to develop a process diagnostic system in basic oxygen steelmaking
by: Short, Jamie
Published: (2016)

Predictive corrosion testing of tin mill products using advanced electrochemical techniques
by: Buttrey, F. E.
Published: (2000)

Modelling of defect behaviour in nematic liquid crystalline materials
by: Lavine, Marc Stuart
Published: (1997)

The joining of gamma titanium aluminide
by: Godfrey, Stuart Paul
Published: (1996)

Rolling textures in iron
by: Hoddinott, Dudley Stuart
Published: (1969)

The development of texture in stainless steel
by: Hill, Stuart John
Published: (1976)

Some aspects of the hot corrosion of nickel-based superalloys
by: Allan, Stuart J.
Published: (1977)

The measurement of vacancy concentrations in quenched aluminium and gold : a study of the lattice parameter variations in quenched pure aluminium and gold, using the Bond X-ray diffraction technique
by: Ryan, Timothy Foster Joseph Nugent
Published: (1974)

Dynamic domain observation in grain-oriented electrical steel using magneto-optical techniques
by: Hoshtanar, Oleksandr
Published: (2006)

Measurement of creep damage in CrMoV steels using ultrasonic test techniques
by: Thomas, A. V.
Published: (1995)

Investigation of monitoring techniques for the detection of tool/workpiece malfunctions in milling of heat resistant alloys
by: Marinescu, Iulian
Published: (2009)

A study of silicon layers by the plasma-spraying technique
by: Alaee, M. S.
Published: (1984)

Development of centrifugation as a technique for measuring cell-substrate adhesion and its use in the comparison of potential, titanium-based, implant materials
by: Robinson, Helen Jane
Published: (2010)

Investigation of in-service embrittlement in 12% CrMoVNbN turbine studs and techniques for its assessment
by: Hickey, J. J.
Published: (2001)

The assessment of high temperature damage in 2.25 Cr - IMo low alloy steel using ultrasonic techniques
by: Abdullah, J. B.
Published: (1996)