Improved Coriolis mass-flow meter

Improved Coriolis mass-flow meter

Bibliographic Details
Main Author:	Atia, Mamdouh
Published:	University of Oxford 1999
Subjects:	681
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.393579

Similar Items

Fractal flow conditioners for orifice plate flow meters
by: Manshoor, Bukhari bin
Published: (2011)

A study of the mechanics of current meters under steady and dynamic flow conditions
by: Jepson, P.
Published: (1965)

The improvement of meter performance of EM sensing flowmeters using software modelling
by: Lim, Sungtaek
Published: (2008)

The formation of novel hydrofluoroalkane metered dose inhalers
by: Jones, Stuart Allen
Published: (2005)

A single-chip digital pH meter
by: Hammond, Paul A.
Published: (2004)

Coriolis Mass Flow Metering for Wet Gas
by: Robbie Lansangan, et al.
Published: (2008-09-01)

Investigation of heat transfer to pneumatically conveyed solids as a means to mass flow rate measurement
by: Zheng, Yingna
Published: (2008)

Flow rate, void fraction and bubble size measurement in gas-liquid mixtures
by: Fell, Roger
Published: (1979)

Hydraulic flow measurement using ultrasonic transducers and correlation techniques : the measurement of liquid turbulence, fluid velocity, solidsmass flow-rate and solidsparticle size in hydraulic pipelines by means of ultrasonic transducers and correlation techniques
by: Ong, K. M.
Published: (1975)

Oil and Gas Applications for Digital Coriolis Mass Flow Metering — Introduction
by: Manus Henry FInstMC
Published: (2008-09-01)

Compact Mass Flow Meter Based on a Micro Coriolis Flow Sensor
by: Remco Wiegerink, et al.
Published: (2013-03-01)

Development and modelling of a point source integrating cavity absorption meter (PSICAM)
by: Lerebourg, Christophe Jean-Yves Joel
Published: (2003)

Preventing biosensor fouling by using laminar flow
by: Kyriacou, George
Published: (2005)

Calibration of prover tanks making use of a Coriolis mass flow meter as the master meter
by: Erik Smits F.M., et al.
Published: (2012-01-01)

Mass spectrometric investigations of derivatised fullerenes using matrix-assisted laser desorption ionisation
by: Kotsiris, Sotirios G.
Published: (2005)

Improved adsorption calorimeter : studies of loose grained silica gel and silica gel-based selective water sorbent (SWS-1L)
by: Selwyn, Rebecca
Published: (2015)

Study of a bi-directional axial flow blood pump
by: Swalen, Marcel Johannes Petrus
Published: (2012)

Development and modelling of ultrasonic methods for flow measurement in oil production pipelines
by: Brown, Gregor J.
Published: (2004)

Kinetic study of calcium carbonate formation and inhibition by using an in-situ flow cell
by: Eroini, Violette
Published: (2011)

Using Coriolis Mass Flowmeter for Wet Gas Metering
by: Yanfeng Geng, et al.
Published: (2010-07-01)

Improving the performance of gas sensors for electronic noses using zeolites as selectivity modifiers
by: Paraskeva, Themis C.
Published: (2005)

Towards a commerical microelectrode array based sensor for improved chlorine detection
by: Mills, Daniel W.
Published: (2005)

Coriolis Flow Meters/The Potential for Outstanding Dynamic Performance
by: C Clark, et al.
Published: (2003-11-01)

Underground cable fault location using multi-element gas sensing
by: Miller, Dawn Elizabeth
Published: (1999)

Electromagnetic flowmeter for dielectric liquids
by: Amare, T.
Published: (1995)

Novel knitted fibre-meshed transducers
by: Wijesiriwardana, Ravindra
Published: (2005)

The design, simulation and fabrication of microengineered silicon gyroscopes
by: Cooper, George
Published: (1996)

Fibre-optic sensors with molecular coatings
by: Partridge, Matthew
Published: (2012)

Photo-induced changes in metal oxides and their applications as self-cleaning piezoelectric based caesium sensors
by: Foran, Philip Stephen
Published: (2013)

Broadcasting, coverage, energy efficiency and network capacity in wireless networks
by: Henna, Shagufta
Published: (2013)

Microstructured Optical Arrays for use with soft X-rays
by: Shand, Matthew
Published: (2012)

Investigation into a multilayered elastomer EAP bending actuator fabricated using a novel spray deposition method
by: Araromi, Oluwaseun A.
Published: (2012)

Image reconstruction in magnetic induction tomography
by: Morris, Andrew
Published: (2004)

Ink release characteristics of anilox rolls
by: Cherry, John Allen
Published: (2007)

A simple integrating device to record temperature or other variables at remote sites
by: Corbett, Richard T.
Published: (1978)

The electro-discharge machining of ink jet nozzle and their precision measurement
by: Huang, X.
Published: (1997)

Sonar systems for object recognition
by: Pailhas, Yan
Published: (2013)

The effect of footway crossfall gradient on wheelchair accessibility
by: Holloway, C. S.
Published: (2011)

Development and characterisation of a confocal Raman microspectrometer
by: Dahlan, Ahmad M.
Published: (2000)

Acoustic monitoring of process vessels
by: Sanchez Galicia, Edgar Ramon
Published: (2007)