Performance analysis of field-orientation controlled induction motor with parameter adaptation

Performance analysis of field-orientation controlled induction motor with parameter adaptation

Bibliographic Details
Main Author:	Bal, Gungor
Published:	University of Strathclyde 1993
Subjects:	621.46
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.392468

Similar Items

Speed sensorless field oriented control for induction motor drive
by: Kumara, I. N. Satya
Published: (2006)

Analysis and control of five-phase induction motor drives
by: Zheng, Libo
Published: (2009)

Application of magnetic fields to aid the detection and diagnosis of induction motor drive faults
by: Pole, Glyn
Published: (2009)

A static Scherbius system of induction motor speed control
by: Smith, Gordon Arthur
Published: (1975)

Design, implementation and performance of conventional and intelligent control schemes and speed estimators for variable speed induction motor drives
by: Neuroth, Matthias
Published: (1999)

Open loop control and stability of induction motor drives, including wavelets
by: Giaouris, Damian
Published: (2004)

A delta-sigma-modulated speed control system for induction motors
by: Aksel, Alpaslan
Published: (1978)

The single-phase induction motor : a critical appraisal of the rotating-field and cross-field theories with particular reference to skin effect
by: Jevons, M. J.
Published: (1966)

On-line diagnosis of faults in induction motor and pump
by: Perovic, Dragica Kostic
Published: (2000)

Inter-bar currents in cage induction motors
by: Poh, Chze Y.
Published: (2004)

Quasi and fully sensorless speed control of indirect RFOC induction motor drives for low speed operation
by: Joukhadar, Abdulkader
Published: (2004)

Effect of design parameters on transients in induction machines
by: Akbaba, M. A.
Published: (1977)

An investigation into current and vibration signatures of three phase induction motors
by: Ashnibha, Rmdan Abdussalm
Published: (2012)

Optimisation of the extended Kalman filter for speed estimation of induction motor drives
by: Buyamin, Salinda
Published: (2007)

Accurate measurement and evaluation of losses and efficiency of new and rewound induction motors
by: Cao, Wenping
Published: (2004)

On the identifiability, parameter identification and fault diagnosis of induction machines
by: Alturas, Ahmed Mohamed
Published: (2016)

Computation of magnetic fields in saturated iron structures with special reference to the computation of short circuit performance of induction machines with wound rotors
by: Mandic, Ivan
Published: (1974)

Transient behaviour of a 3-phase slip-ring induction motor with external impedance in the rotor circuit
by: Karim, Kadhem D.
Published: (1979)

The use of parameter identification methods for the condition monitoring of electric motor drives
by: Treetrong, Juggrapong
Published: (2009)

Advanced control of switched reluctance motors
by: Lin, Zhengyu
Published: (2005)

An advanced drive system for permanent magnet synchronous motors using field programmable
by: Jayasoma, Sujitha
Published: (2003)

Design, analysis, measurement and control of a new disc-type ultrasonic motor system
by: Juang, Puu-An
Published: (2005)

A study of the controllability of electric stepping motors
by: Carter, J. R.
Published: (1971)

An improvement to standard polyphase induction motor efficiency tests using a precision measurement technique for online stator winding resistance measurement
by: Feldman, R. G.
Published: (2007)

Control of an asymmetrical 3-phase permanent magnet synchronous motor
by: Zhao, Xuandi
Published: (2010)

The design and evaluaion of a feed-forward controller for electric stepping motors
by: Brumer, R. E.
Published: (1972)

The design and development of a microprocessor based controller of stepping motor drives
by: Prasad, A.
Published: (1979)

Analysis of canned line-start permanent magnet motors
by: Peralta Sanchez, Edgar
Published: (2006)

Modelling and control of series-connected five-phase and six-phase two-motor drives
by: Iqbal, Atif
Published: (2005)

Flextensional piezoelectric motors
by: Leinvuo, J.
Published: (2004)

Smart motor protection
by: Inuwa, A. D.
Published: (1992)

Assessment of power losses in inverter-driven induction machines
by: Hernandez-Aramburo, Carlos Alberto
Published: (2003)

The behaviour of an induction machine / cycloconverter system with continuous and discontinuous current
by: Monteith, William
Published: (1973)

Segmented rotor switched reluctance motors
by: El-Kharashi, Eyhab Aly Kamel
Published: (2003)

The design of single-phase switched reluctance motors
by: Jenkinson, Graeme Craig
Published: (1999)

Optimisation of a cylindrical linear switched reluctance motor
by: Ouhab, Boussad
Published: (2000)

Direct converter technology applied to an integrated motor drive
by: Apap, Maurice
Published: (2005)

High power fault tolerant motors for aerospace applications
by: Atkinson, Glynn James
Published: (2007)

The influence of saturation and phase number on switched reluctance motor design
by: Stroud, Robert Jonathan
Published: (1985)

Wear characterisation and usage level estimation of small DC motors
by: Wienrich, Ulrich
Published: (1999)