A physicochemical analysis of mortars and cements from medieval cathedrals of England and France

A physicochemical analysis of mortars and cements from medieval cathedrals of England and France

Bibliographic Details
Main Author:	Adams, James Edwin
Published:	University of Salford 1994
Subjects:	691 Construction equipment
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.386395

Similar Items

Ultrasonic pulse velocity testing of mortars and concretes at early ages
by: Casson, Ronald Brian Jeffrey
Published: (1984)

The effect of temperature on the hydration of portland cement and composite cement pastes
by: Escalante-Garcia, Jose Ivan
Published: (1996)

Sulphate attack of Portland limestone cements
by: Hartshorn, Sarah Ann
Published: (1998)

Polypropylene fibre reinforcement of hardened cement paste
by: Gandhi, D.
Published: (1982)

The influence of cement and aggregate identity on concrete performance
by: Milnes, Kathryn
Published: (2000)

Effect of elevated temperatures on the strength of different cement pastes and concretes
by: Sarshar, Roozbeh
Published: (1989)

The use of cement stabilised soil for low cost housing in developing countries
by: Dad, M.
Published: (1985)

Mechanical properties of cement composites reinforced with randomly distributed monofilament polypropylene fibres
by: Sahoo, A. K.
Published: (1982)

The effects of commercial chemical cleaning processes on sandstones in Scotland
by: MacDonald, John
Published: (1993)

A study of water and ionic movement in partially saturated concrete
by: Ezirim, Hubert Chidi
Published: (1995)

Application of cyclic uniaxial compression testing to investigate the effects of preload and other factors on the structural properties of concrete affected by alkali silica reaction
by: Salam, Jamal Mohamad
Published: (1993)

Reinforced concrete slabs with partial lateral edge restraint
by: Olonisakin, Akinwumi Adeyemi
Published: (1996)

Mechanical re-texturing of road surface aggregates
by: Soleymani Kermani, Mohammad Reza
Published: (1995)

Tensile and shear impact strength of concrete and fibre reinforced concrete
by: Mahjoub-Moghaddas, Hamid
Published: (1991)

A study of evaporation and drying in porous building materials
by: Platten, A. K.
Published: (1985)

Leadership patterns in the construction industry in Algeria
by: Djebarni, Ramdane
Published: (1993)

A study of Kuwait marine clay and its suitability for production of synthetic aggregate and other building materials
by: Parks, L. F.
Published: (1985)

Evaluation of some Jordanian limestone as building stone
by: Moh'd, Basem Khalil Abdul-Hafiz
Published: (1996)

The mechanics of ejector unloading systems in earthmoving equipment
by: Al-Janabi, Z. K. K.
Published: (1990)

Engineering and durability properties of high performance structural lightweight aggregate concrete
by: Wu, Lixian
Published: (1997)

Further development two-point test for the measurement of fresh concrete
by: Bloomer, S. J.
Published: (1981)

Aspects of mix proportioning and moisture content on the thermal conductivity of lightweight aggregate concretes
by: Tinker, J. A.
Published: (1984)

Serviceability of reinforced concrete subjected to tension
by: Haqqi, S. I.
Published: (1983)

Workability measurement with special reference to control of concrete production
by: Ahmad, Saeed
Published: (1983)

Roller compacted concrete (RCC) for dams
by: Schrader, Ernest K.
Published: (1998)

Behaviour of concrete subjected to thermal loading
by: Guo, Jiansong
Published: (1997)

Design and testing of self-compacting concrete
by: Chai, Hsi-Wen
Published: (1998)

An accelerated test method for efflorescence in clay bricks
by: Beggan, John Edward
Published: (1998)

Development of a design method for restrained concrete slab systems subject to concentrated and uniform loadings
by: Skates, Alan Stewart
Published: (1987)

The behaviour of concrete under cyclic loading at cryogenic temperatures
by: Kronen, H.
Published: (1984)

Wick action in concrete
by: Shurafa-Daoudi, Mohamed Tarek Suleiman
Published: (1999)

The relationship between the microstructure and mechanical properties of setting gypsum plasters
by: Lewry, Andrew John
Published: (1987)

Permeability of concrete in a marine environment
by: Buenfeld, Nicholas Robert
Published: (1984)

Vibratory conveyors
by: Redford, Alan Harry
Published: (1966)

The environmental impact of frame materials : an assessment of the embodied impacts for building frames in the UK construction industry
by: Brocklesby, Martin
Published: (1999)

Punching shear and moment transfer in reinforced concrete flat slabs
by: Kamaraldin, Khaled
Published: (1990)

Improved processes for the production of soil-cement building blocks
by: Gooding, Dominic Edward Maxwell
Published: (1994)

The use of price data from analysis of bills of quantities in construction price estimating
by: Stevens, S. D.
Published: (1983)

The use of china clay waste as a construction material using alkali-activated cement technology
by: Zografou, Adamantia
Published: (2015)

An assessment of the relationship between the water vapour permeability and hydraulicity of lime based mortars with particular reference to building conservation materials science
by: Forster, Alan M.
Published: (2002)