The influence of the accumulation of deformation on the failure of polyethylene pipe materials

The influence of the accumulation of deformation on the failure of polyethylene pipe materials

Bibliographic Details
Main Author:	Ward, Andrew L.
Published:	Manchester Metropolitan University 1994
Subjects:	621.69 Creep deformation
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.386054

Similar Items

Rapid crack propagation in polyethylene gas pipes
by: Yayla, Pasa
Published: (1991)

An assessment of the performance of high density polyethylene copolymers for natural gas distribution pipes
by: McNally, Paul F.
Published: (1980)

Ductile-brittle transitions in pipe grade polyethylene
by: Morgan, Robert Edward
Published: (1994)

The mechanical behaviour and fatigue analysis of flexible pipes
by: Chen, Zhenxin
Published: (1990)

Stabilisation of medium density polyethylene gas pipe in service applications
by: Palmer, Simon J.
Published: (1989)

Dynamic crushing of thin-walled tube arrays
by: Shim, V. P. W.
Published: (1986)

Stress analysis and design of some pressure vessel and piping components
by: Moffat, Douglas G.
Published: (2000)

Investigation of the flow in an idealised inlet port/poppet valve assembly
by: Ahmed, Ashraf Mohamed Yossri
Published: (1986)

Experimental and analytical studies of conventional (gasketed) and unconventional (non-gasketed) flanged pipe joints
by: Abid, Muhammad
Published: (2001)

Variable conductance heat pipes
by: Fulford, D. J.
Published: (1989)

Mass transfer and erosion-corrosion in pipe bends
by: Sprague, P. J.
Published: (1984)

The response of buried uPVC pipes to surface loading
by: Rogers, C. D. F.
Published: (1985)

Solutions to the Navier-Stokes equation set for spiral pipes
by: Mosley, Nile Spencer
Published: (1996)

Vibration transmissibility characteristics of fibre and steel reinforced flexible pipes
by: Kennedy, I.
Published: (1987)

Glass reinforced plastic pipe bends under a variety of loads
by: Myler, P.
Published: (1985)

The influence of end constraints on pipe bends : a study of smooth pipe bends with flange and tangent pipe end constraints under in-plane bending
by: Thomson, Gordon
Published: (1980)

The behaviour of thin walled pipes in trenches
by: Bueno, Benedito de Souza
Published: (1987)

Strength and flexibility of glass reinforced plastic pipes and pipe bends
by: Tan, A. L.
Published: (1983)

Vitrified clay pipes installed by trenchless techniques
by: Husein, Nasib Mahmoud
Published: (1989)

Pipe design for improved particle distribution and improved wear
by: Raylor, Benjamin
Published: (1998)

Inelastic collapse of pipes under external pressure and bending
by: Tay, C. J.
Published: (1978)

The analysis of piping systems on a microcomputer using pipe bend elements
by: See, P. S.
Published: (1985)

Creep of pipe bends with end constraints
by: Chan, C. K. L.
Published: (1984)

An experimental and numerical study of plug formation in vertical pipes during cryogenic pipe freezing
by: Burton, M. J.
Published: (1986)

Low velocity transverse impact of filament wound E-glass/epoxy resin pipes
by: Ainsworth, Kim
Published: (1991)

A study on pipe bends : an analysis of the smooth pipe bend with flanged end constraints under out-of-plane bending and the development of experimental techniques in the creep of pipe bends
by: Rae, Kenneth
Published: (1984)

An experimental study of ice formation in pipes
by: Bowen, Richard James
Published: (2000)

Analysis and design of buried flexible pipes
by: Gumbel, J. E.
Published: (1983)

Simulation and measurement of transients in pipes and compressors
by: Boroomand, Masoud
Published: (1992)

The asset lives of plastic pipes : technical and economic factors affecting the in-service life of pressurised polymer pipes in the water industry
by: Mason, Nicholas Scott
Published: (1998)

Behaviour of pressurised pipes containing dents and gouges
by: Lancaster, Earl Royland
Published: (1994)

The motion of air cavities in water filled pipes
by: Ali, Salah Taofeek
Published: (1988)

The design and analysis of pipe diffusers for centrifugal compressors
by: Bennett, Ian
Published: (1997)

Internal linings of pipes to achieve energy conservation
by: Chu, C. Y.
Published: (1983)

Residual stresses in girth butt welded pipes
by: Scaramangas, A.
Published: (1984)

An experimental and analytical study of pipe-soil interaction
by: Sehmi, H. S.
Published: (1986)

A study of single mitre pipe bends
by: Wood, J.
Published: (1983)

Liquid-liquid dispersed flows in horizontal pipes
by: Angeli, Panagiota
Published: (1996)

Performance and application of fluidic diverters
by: Taylor, Stephen Alan
Published: (1993)

Steam air ejector performance and its dimensional parameters
by: Dandachi, Jaber M. A.
Published: (1990)