Stresses in winch barrels with particular reference to multi-layering

Stresses in winch barrels with particular reference to multi-layering

Bibliographic Details
Main Author:	Karbalai, D.
Published:	University of Sunderland 1988
Subjects:	621.8 Wire ropes/drum loadings
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.383621

Similar Items

Tribological Aspects of the Process of Winding the Steel Rope Around the Winch Drum
by: M. Matejić, , , ,, et al.
Published: (2014-03-01)

The lubrication of cylinders with particular reference to roller bearings
by: Boness, R. J.
Published: (1969)

The wear behaviour of pearlitic steels with particular reference to rails
by: Clayton, P.
Published: (1977)

The application of spline functions for kinematic motion design with particular reference to cam mechanisms
by: Caulfield-Browne, Mark
Published: (1994)

Analysis of dynamically loaded hydrodynamic journal bearings with particular reference to misaligned marine sterntube bearings
by: Jakeman, R. W.
Published: (1988)

Friction and lubrication with special reference to gearing
by: Cameron, A.
Published: (1948)

Dynamic analysis of the main power loom mechanisms with particular reference to speed variation and power consumption
by: Mohamed, M. H. M.
Published: (1965)

The design and performance of gear pumps with particular reference to marginal suction condition
by: Ali, Khalaf Hassan
Published: (1989)

A finite element and experimental determination of the temperature distribution in a gearbox with particular reference to machine tool thermal analysis
by: Joule, David
Published: (1986)

Elastohydrodynamic lubrication of point contacts for layers of "soft" solids and for "monolithic" "hard" materials in the transient bouncing ball problem
by: Wang, Ducai
Published: (1994)

The dynamic behaviour of multi-recess hydrostatic journal bearings
by: Leonard, R.
Published: (1970)

Constraint analysis and theoretical development of multi-furcation and reconfiguration in mechanisms
by: Qin, Yun
Published: (2013)

Effect of bearing constraints on the whirling characteristics of a multi-rotor system
by: Bosworth, R.
Published: (1966)

Novel robust control of damping oscillations in power systems with multi-machine wind farms
by: Peng, Y.
Published: (2014)

The influence of long-range residual stress on plastic collapse of pressurised pipes with and without flaws
by: Wu, Guiyi
Published: (2015)

Plastic deformation and residual stress of surface roughness asperities in elastohydrodynamic contact with consideration of surface fatigue
by: Al-Mayali, Maasi
Published: (2017)

The flexibility of piping systems : an experimental investigation of the stresses and end reactions in full-scale piping systems caused by thermal expansion and other movements
by: Smith, Raymond Thomas
Published: (1965)

A methodology for the concurrent design of cam driven systems with particular application to motion synthesis
by: Mashford, Kerry Jean
Published: (1992)

Theoretical and experimental studies of the effect of clearance and geometry in hydrodynamic journal bearings
by: Dyer, D.
Published: (1973)

The design and optimization of slot hybrid journal bearings
by: Koshal, D.
Published: (1978)

An investigation into the operation of water-lubricated rubber journal bearings
by: Cabrera, D. L.
Published: (2003)

A depth-averaged model for non-isothermal rimming flow driven at the surface by droplet impact
by: Kay, E. D.
Published: (2014)

Dynamic performance of a double poppet valve flow controller
by: Abdul-Ahad, D. N.
Published: (1977)

Numerical modelling of through-thickness reinforced structural joints
by: Bianchi, Francesco
Published: (2012)

Sensorless control strategies for low-cost, high-speed electrical drive systems
by: Bateman, Christopher John
Published: (2010)

An investigation of high speed and power permanent magnet synchronous machines
by: Mehna, Ali A. Ahmed Omran
Published: (2011)

The performance of dry running non-metallic gears
by: Mao, Kun
Published: (1993)

Development of an optimum pipeline renovation using Cured-In-Place Pipe (CIPP) techniques
by: Razmara, Mohammad
Published: (2008)

Tribology of polymers and composites in unlubricated rolling and sliding contact
by: Chen, Yong Kang
Published: (1996)

Condition monitoring and fault diagnosis of three-phase induction motors
by: Liang, Bo
Published: (2001)

An investigation into tribological and performance related aspects polymeric gearing
by: Dearn, Karl David
Published: (2009)

Prediction of contact fatigue for the rough surface elastohydrodynamic lubrication line contact problem under rolling and sliding conditions
by: Qiao, Hua
Published: (2005)

Study of parameters influencing surface distress of gears
by: Alanou, M. P.
Published: (2006)

Impulsive vibration measurement for rolling bearing condition assessment
by: Birch, David James
Published: (2002)

A generalised approach to machine control
by: Harrison, Robert
Published: (1991)

Optimisation of a high-energy loss control valve trim using computational and experimental techniques
by: Morton, Karen M.
Published: (2003)

Numerical simulation of two-phase gas and non-Newtonian shear-thinning fluid flows in pipelines
by: Jia, Ninghong
Published: (2011)

Investigation of the problems of buried thin-wall pipes
by: Cray, P. A.
Published: (1974)

Response of two-dimensional piping systems during pipe whip
by: Wang, B.
Published: (1991)

Development of a cantilevered floating ring seal
by: Vasco, Veronica
Published: (2009)