The experimental determination of the flexibility of tubular joints in offshore structures

The experimental determination of the flexibility of tubular joints in offshore structures

Bibliographic Details
Main Author:	Mockford, P. B.
Published:	University of Nottingham 1986
Subjects:	621.69 Pumps & filters & pipes & tubing & valves
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.371285

Similar Items

Analysis and design of buried flexible pipes
by: Gumbel, J. E.
Published: (1983)

Strength and flexibility of glass reinforced plastic pipes and pipe bends
by: Tan, A. L.
Published: (1983)

An experimental study of ice formation in pipes
by: Bowen, Richard James
Published: (2000)

An experimental and analytical study of pipe-soil interaction
by: Sehmi, H. S.
Published: (1986)

An experimental study of ice formation and convection during cryogenic pipe freezing
by: Tavner, Angus Charles Robert
Published: (1992)

An experimental and numerical study of plug formation in vertical pipes during cryogenic pipe freezing
by: Burton, M. J.
Published: (1986)

Theoretical and experimental studies on the evaluation of pumps for photovoltaic powered water pumping and its application in Pakistan
by: Rizvi, Syed Najeeb Ahmed
Published: (1991)

On the structural mechanics of multi-layered subsea pipelines
by: Silva, Renato Marques Correa da
Published: (1998)

Design of fibre composite structures for large water valves
by: Bizzari, F. M. H.
Published: (1980)

Flow in pipe fittings at low Reynolds numbers : an experimental study at head losses for the flow of Newtonian and non-Newtonian liquids through a variety of pipe-fittings
by: Jadallah, M. S. M.
Published: (1980)

A study on pipe bends : an analysis of the smooth pipe bend with flanged end constraints under out-of-plane bending and the development of experimental techniques in the creep of pipe bends
by: Rae, Kenneth
Published: (1984)

A study on the structural integrity of thin-walled longitudinal lap welded vessels subjected to pressure and thermal loading with reference to static and cyclic conditions
by: Al-Jamri, Mansoor Abdul-Ameer
Published: (1992)

Hydrostatic extrusion of tubes
by: Marques, M. J. M. B.
Published: (1980)

The volumetric performance of cavitating centrifugal pumps
by: Grist, E.
Published: (1986)

Surge prediction in multistage axial and centrifugal compressors
by: Gill, M. E.
Published: (1986)

Steam compression in the single screw compressor
by: Yell, M. D.
Published: (1986)

Plastic limit pressures for pressure vessels with defects at openings
by: Lim, C. S.
Published: (1986)

The effect of proof testing on the shakedown behaviour of pressure vessel components
by: Crawley, Nigel Ian
Published: (1993)

Buckle initiation and propagation in subsea pipelines
by: Tam, Christophe Kwok Wah
Published: (1999)

Plastic loads for branch pipe junctions subjected to combined internal pressure and in-plane bending moments
by: Kirkwood, Michael George
Published: (1989)

The performance and control of fluidic diode pumps
by: Malekottodjari, M.
Published: (1984)

Ratcheting of plain pressurized cylinders subjected to seismic bending moments
by: Zehsaz, Mohammad
Published: (1997)

Local loading and saddle supports on cylindrical vessels : some analytical and finite element studies of local load and saddle support problems with a special emphasis towards generating improved design methods
by: Nash, David Hugh
Published: (1999)

On the performance of vapour compressed heat pumps
by: Mawhinney, K. A.
Published: (1981)

The analysis of piping systems on a microcomputer using pipe bend elements
by: See, P. S.
Published: (1985)

Gas force effects on compressor valves in the early stages of valve opening
by: Fleming, J. S.
Published: (1983)

The motion of air cavities in water filled pipes
by: Ali, Salah Taofeek
Published: (1988)

Condensing annular flow inside tubes
by: Emilio Guevara, M.
Published: (1980)

Wear of polymeric pipes and linings in hydraulic slurry transportation
by: Lowe, D.
Published: (1989)

The design and analysis of pipe diffusers for centrifugal compressors
by: Bennett, Ian
Published: (1997)

Optimal eccentric annuli of atmospheric pressure air for thermally insulating horizontal cold pipes
by: Chakrabarti, S.
Published: (1982)

The design and analysis of a self-actuating steam displacement water pump
by: Brewin, D. F.
Published: (1984)

Stabilisation of medium density polyethylene gas pipe in service applications
by: Palmer, Simon J.
Published: (1989)

Internal linings of pipes to achieve energy conservation
by: Chu, C. Y.
Published: (1983)

Residual stresses in girth butt welded pipes
by: Scaramangas, A.
Published: (1984)

Buckle propagation in submarine pipelines
by: Kamalarasa, Sanmugarasa
Published: (1987)

'Valve stroking' with separated flow
by: Driels, M. R.
Published: (1973)

The flow of cement pastes and mortars in a pipeline
by: Sakuta, M.
Published: (1981)

Long-running ductile fracture of high pressure gas pipelines
by: Abbassian, F.
Published: (1985)

The behaviour of electrically active and prefilter fibrous filters under solid aerosol load
by: Walsh, Declan Christopher
Published: (1995)