Use of noise for the detection of gear faults in rotating machinery

Use of noise for the detection of gear faults in rotating machinery

Bibliographic Details
Main Author:	Johnson, David Ewen
Published:	University of the West of England, Bristol 1993
Subjects:	621.8 Machinery & tools
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.358312

Similar Items

An experimental and theoretical investigation of noise and power reduction in high speed cable making machinery
by: Austin, Lisa
Published: (1998)

The use of tangential accelerometers in gear drives
by: Echeverria-Villagomez, Jose Salvador
Published: (1991)

Gear drive transmission errors
by: Dalt, K. J.
Published: (1980)

Dynamic response of geared system with backlash
by: Basmaji, F.
Published: (1983)

Optimised parametric gear system design
by: Li, Xianren
Published: (1994)

The kinematic analysis and metrology of cylindrical worm gearing
by: Hu, Jun
Published: (1997)

The elastic analysis of load distribution in wide-faced helical gears
by: Haddad, Charles Daoud
Published: (1991)

Applications of time-scale representations and artificial neural networks in gear condition monitoring
by: Chen, Dajun
Published: (1998)

Numerical analysis and three dimensional modelling of worm gearing with localised tooth contact
by: Yang, Feng
Published: (2000)

PC based diagnostic system for the condition monitoring of rotating machines
by: Neill, Gary David
Published: (1998)

The design and control of FMS rotational parts
by: Bilalis, N. G.
Published: (1983)

The dynamics of rotationally flexible eccentric cams
by: Balkwill, J. D. G.
Published: (1997)

Stationary wave amplitudes in rotating discs
by: Olamigoke, A.
Published: (1981)

Noise and vibration of flat plates
by: McNulty, G. J.
Published: (1980)

Experimental investigations of blade noise
by: Dowle, S. H. M.
Published: (1982)

The prediction of dynamic characteristics of rotating spindle systems
by: Taylor, Roland D.
Published: (1981)

An interactive process planning system for non-rotational parts
by: Eskicioglu, H.
Published: (1981)

Extrusion honing using mixtures of polyborosiloxanes and grit
by: Trengove, Sean Alexander
Published: (1993)

Development design procedures for reciprocating mechanism using hydraulic actuators controlled by rotary valves and a performance evaluation of actuator designs used in tufting machines
by: Kogoda, S. P.
Published: (1982)

On-line condition monitoring of power press tooling using ultrasonics
by: Bathe, Martin J.
Published: (1992)

A finite element and experimental determination of the temperature distribution in a gearbox with particular reference to machine tool thermal analysis
by: Joule, David
Published: (1986)

Face milling of titanium coated alloys using coated and uncoated carbide tools
by: Sharif, Safian
Published: (1999)

The design of lubricant recirculating hydrodynamic spiral groove bearings using grease lubricants
by: Molyneaux, A. K.
Published: (1983)

The determination of a journal bearing's stiffness and damping coefficients using an extended Kalman filter
by: Mohammad, Zakariya Yahya
Published: (1990)

Design and analysis of the SVOBODA mechanism as a hybrid machine
by: Greenough, Jeremy David
Published: (1996)

Machinability assessment and tool selection for milling
by: Carpenter, Ian David
Published: (1996)

Studies in boom type tunnelling machine performance using a full scale laboratory research rig
by: Speight, H. E.
Published: (1983)

A study of the influence of machining variations on the capability, selection and economic use of a group of machine tools
by: Marsh, R.
Published: (1982)

Latch needles for high speed weft knitting : The use of dynamic finite element techniques to solve the knitting needle hook failure problem
by: Elbeshir, E. M.
Published: (1983)

Use of the finite element method for the vibration analysis of rotating machinery
by: Kubba, Basil
Published: (1981)

Enhanced information extraction from noisy vibration data for machinery fault detection and diagnosis
by: Tian, Xiange
Published: (2017)

Sewing machine, fabric and thread dynamics
by: Chmielowiec, Ryszard
Published: (1993)

Downhole fluid flow simulation during tripping operations
by: Zhang, Zhao Kang
Published: (2001)

The non-linear response of overhung rotors in floating ring bearings
by: McLarnon, Christopher Norman
Published: (1997)

An investigation into the tilt of turbo - generator rotor bearings
by: Whitfield, Robert Ian
Published: (1995)

The development of a prototype moire fringe borehole deformation instrument
by: Dailey, E.
Published: (1981)

On line vibration of a flexible rotor/bearing system
by: Clements, Shaun
Published: (1987)

The cutting performance of coated carbide tools
by: Fowler, J. O.
Published: (1980)

A theoretical and experimental study into the dynamic characteristics of a hydrodynamic oil film bearing
by: Makdissy, J.
Published: (1980)

A theoretical and experimental investigation of erosion prone areas on the blade surfaces of a centrifugal impeller handling granular solids
by: Ahmad, K.
Published: (1982)

Cannot write session to /tmp/vufind_sessions/sess_h1enrbngm1v43rrnd2v8in5gbu