| Summary: | Number Theoretic Transforms (NTTs) are defined in a finite ring of integers Z (_M), where M is the modulus. All the arithmetic operations are carried out modulo M. NTTs are similar in structure to DFTs, hence fast FFT type algorithms may be used to compute NTTs efficiently. A major advantage of the NTT is that it can be used to compute error free convolutions, unlike the FFT it is not subject to round off and truncation errors. In 1976 Winograd proposed a set of short length DFT algorithms using a fewer number of multiplications and approximately the same number of additions as the Cooley-Tukey FFT algorithm. This saving is accomplished at the expense of increased algorithm complexity. These short length DFT algorithms may be combined to perform longer transforms. The Winograd Fourier Transform Algorithm (WFTA) was implemented on a TMS9900 microprocessor to compute NTTs. Since multiplication conducted modulo M is very time consuming a special purpose external hardware modular multiplier was designed, constructed and interfaced with the TMS9900 microprocessor. This external hardware modular multiplier allowed an improvement in the transform execution time. Computation time may further be reduced by employing several microprocessors. Taking advantage of the inherent parallelism of the WFTA, a dedicated parallel microprocessor system was designed and constructed to implement a 15-point WFTA in parallel. Benchmark programs were written to choose a suitable microprocessor for the parallel microprocessor system. A master or a host microprocessor is used to control the parallel microprocessor system and provides an interface to the outside world. An analogue to digital (A/D) and a digital to analogue (D/A) converter allows real time digital signal processing.
|
|---|
