Physical and chemical characteristics of rocks from downhole measurements

Physical and chemical characteristics of rocks from downhole measurements

Bibliographic Details
Main Author:	Bristow, James F.
Published:	University of Nottingham 1993
Subjects:	622 Well logging
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.336177

Similar Items

System modelling and testing of a magnetic susceptibility device and effect of downhole in-situ temperatures on magnetic susceptibility
by: Ali, Arfan
Published: (2009)

A mechanistic interpretation of novel 'tagged' polymeric scale inhibitors, synthesised, characterised and applied to downhole oilfield applications
by: Hills, Emma Jane
Published: (2004)

The measurement and analysis of accelerations in rock slopes
by: Cundall, Peter Alan
Published: (1971)

Downhole Lithological Profile Reconstruction Based on Chemical Composition of Core Samples and Drill Cuttings Measured with Portable X-ray Fluorescence Spectrometer
by: Sylwia Kowalska, et al.
Published: (2020-12-01)

The influence of post failure characteristics of coal measures rocks on the stability of mine tunnels
by: White, M. J.
Published: (1983)

Downhole Physical Property Logging of the Blötberget Iron Deposit, Bergslagen, Sweden
by: Johansson, Philip
Published: (2017)

Measured field performance of full-face tunnel boring machines in chalk and coal measures rock
by: Hignett, Henry J.
Published: (1978)

Underground potash mine design based on rock mechanics principles and measurements
by: Hebblewhite, Bruce K.
Published: (1977)

An in situ investigation of the physical properties of rock salt with special reference to underground gas storage
by: Dack, E.
Published: (1973)

Application of high voltage breakage to a range of rock types of varying physical properties
by: van der Wielen, Klaas Peter
Published: (2013)

Effects of mining subsidence on the permeability of coal measures rocks
by: Neate, C. J.
Published: (1980)

Strata loading characteristics of mining tunnels in carboniferous rock formations
by: Whittaker, P. E.
Published: (1983)

The post-failure stress-permeability behaviour of coal measure rocks
by: Jozefowicz, R. R.
Published: (1997)

Correlation of rock properties and tunnel machine performance in selected sedimentary rocks
by: McFeat-Smith, Ian
Published: (1975)

The machining of rock materials
by: Allington, Andrew V.
Published: (1969)

The Determination of the Nature of the Reserves of Typical Igneous Intrusive Rock Quarries by both Field and Laboratory Geophysical Measurements
by: Wattananikorn, K.
Published: (1978)

Detection and quantification of rock physics properties for improved hydraulic fracturing in hydrocarbon-bearing shales
by: Montaut, Antoine Marc Marie
Published: (2013)

Modelling of transient flow and pressure behaviour in multilayer stratified reservoirs
by: Al-Gheithy, Ali Amor
Published: (1993)

Support characteristics of underground mining excavations with special reference to rock reinforcement techniques
by: Zadeh, A. M. H.
Published: (1982)

Well log responses in metamorphic rocks near Maribor
Published: (1995-12-01)

The development of a remote surveying vehicle for surveying in hazardous hard-rock underground mining operations
by: Purser, James Joblin
Published: (2009)

Aspects of energy requirements for rock drilling
by: Wootton, David
Published: (1974)

A design procedure for room and pillar mining of rock salt using a correlation of laboratory and mine pillar deformation measurements
by: Potts, W. H.
Published: (1972)

The influence of water content on the rock cutting parameters of six rocks
by: Abdulrahman, Ahmed Abdulhamid
Published: (1999)

A Study of Percussive Rock Drill Bits
by: Wheeler, P. M.
Published: (1977)

An Investigation into the Percussive Drill Bit Penetration of Rock
by: Shahrom, M. K.
Published: (1978)

The influence of water on long-term strength properties of coal measures rocks associated with mining excavations
by: Oldham, R. H.
Published: (1985)

The evaluation of novel remote techniques for the detection of rock mass failure
by: Chester, Christopher James
Published: (2005)

Assessment of rock cutting and rock fragmentation by blasting using image analysis
by: Djouama, Mohamed Cherif
Published: (1990)

Rock mass characterisation and indexing for excavation assessment
by: Rogers, Stephen F.
Published: (1991)

Numerical modelling of rock movements around mine openings
by: Pan, Xiao-Dong
Published: (1989)

The dynamic and static behaviour of resin bonded rock bolts in tunnelling
by: Xu, Haixue
Published: (1993)

A theoretical and practical investigation of large scale rock blasting
by: Westwater, Robert
Published: (1953)

A model study of the behaviour of steep excavated rock slopes
by: Barton, Nicholas Ryland
Published: (1971)

Design of underground excavations in rocks
by: Ibrahim, A. T. H.
Published: (1983)

The application of deconvolution in well test analysis
by: Roumboutsos, Athena
Published: (1988)

Rock mechanics problems associated with the extraction of highly inclined parallel orebodies
by: MacLeod-Carey, I. R.
Published: (1969)

A Study of the Mechanics of Rock Blasting Using Small Scale Models
by: El-Gindy, M.
Published: (1977)

Transport relationships in porous media as a model for oil reservoir rocks
by: Tanko, Nuradeen L.
Published: (2011)

The development of the Cracked-Chevron-Notched Brazilian Disc method for rock fracture toughness measurement and tunnelling machine performance prediction
by: Chen, Jun Fang
Published: (1989)