The use of tangential accelerometers in gear drives

The use of tangential accelerometers in gear drives

Bibliographic Details
Main Author:	Echeverria-Villagomez, Jose Salvador
Published:	University of Cambridge 1991
Subjects:	621.8 Machinery & tools
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.334077

Similar Items

Gear drive transmission errors
by: Dalt, K. J.
Published: (1980)

Use of noise for the detection of gear faults in rotating machinery
by: Johnson, David Ewen
Published: (1993)

Dynamic response of geared system with backlash
by: Basmaji, F.
Published: (1983)

Optimised parametric gear system design
by: Li, Xianren
Published: (1994)

The kinematic analysis and metrology of cylindrical worm gearing
by: Hu, Jun
Published: (1997)

The elastic analysis of load distribution in wide-faced helical gears
by: Haddad, Charles Daoud
Published: (1991)

Applications of time-scale representations and artificial neural networks in gear condition monitoring
by: Chen, Dajun
Published: (1998)

Numerical analysis and three dimensional modelling of worm gearing with localised tooth contact
by: Yang, Feng
Published: (2000)

Great drive transmission errors
by: Daly, K. J.
Published: (1980)

A wear study of heavy duty drive chain
by: Hollingworth, N.
Published: (1986)

An electrohydraulic stepping motor drive for numerically controlled machine tools
by: Jackson, J. F.
Published: (1972)

Improvements in the efficiency and thermal ageing of single and parallel machine drives
by: Mellor, P. H.
Published: (1983)

Extrusion honing using mixtures of polyborosiloxanes and grit
by: Trengove, Sean Alexander
Published: (1993)

Development design procedures for reciprocating mechanism using hydraulic actuators controlled by rotary valves and a performance evaluation of actuator designs used in tufting machines
by: Kogoda, S. P.
Published: (1982)

On-line condition monitoring of power press tooling using ultrasonics
by: Bathe, Martin J.
Published: (1992)

Face milling of titanium coated alloys using coated and uncoated carbide tools
by: Sharif, Safian
Published: (1999)

The design of lubricant recirculating hydrodynamic spiral groove bearings using grease lubricants
by: Molyneaux, A. K.
Published: (1983)

The determination of a journal bearing's stiffness and damping coefficients using an extended Kalman filter
by: Mohammad, Zakariya Yahya
Published: (1990)

Studies in boom type tunnelling machine performance using a full scale laboratory research rig
by: Speight, H. E.
Published: (1983)

A study of the influence of machining variations on the capability, selection and economic use of a group of machine tools
by: Marsh, R.
Published: (1982)

Evaluation of technical systems at the design stage
by: Aguirre-Esponda, Guillermo Jose
Published: (1992)

Latch needles for high speed weft knitting : The use of dynamic finite element techniques to solve the knitting needle hook failure problem
by: Elbeshir, E. M.
Published: (1983)

Condition monitoring of rolling element bearings : a comparative study of vibration-based techniques
by: Khan, A. F.
Published: (1991)

Production enhancement in the planing and spindle moulding process utilising a mechatronic approach
by: Cutri, Francesco Angelo
Published: (1991)

Downhole fluid flow simulation during tripping operations
by: Zhang, Zhao Kang
Published: (2001)

The non-linear response of overhung rotors in floating ring bearings
by: McLarnon, Christopher Norman
Published: (1997)

An investigation into the tilt of turbo - generator rotor bearings
by: Whitfield, Robert Ian
Published: (1995)

The development of a prototype moire fringe borehole deformation instrument
by: Dailey, E.
Published: (1981)

On line vibration of a flexible rotor/bearing system
by: Clements, Shaun
Published: (1987)

The cutting performance of coated carbide tools
by: Fowler, J. O.
Published: (1980)

The prediction of dynamic characteristics of rotating spindle systems
by: Taylor, Roland D.
Published: (1981)

A theoretical and experimental study into the dynamic characteristics of a hydrodynamic oil film bearing
by: Makdissy, J.
Published: (1980)

A theoretical and experimental investigation of erosion prone areas on the blade surfaces of a centrifugal impeller handling granular solids
by: Ahmad, K.
Published: (1982)

The design and control of FMS rotational parts
by: Bilalis, N. G.
Published: (1983)

Experimental and theoretical studies on steady state journal bearings and relevant transducer systems
by: McFarlane, C. W. R.
Published: (1984)

Experimental and analytical studies on temperature distributions in bath lubricated radial roller bearing assemblies
by: Schwarz, V. A.
Published: (1982)

The simulation and control of centrifugal compressors
by: Boulton, C. B.
Published: (1982)

Friction and wear of ceramic fibre guides
by: Gibbs, N. K.
Published: (1982)

Operation of rotor-bearing systems subject to dynamic conical misalignment
by: Ogrodnik, Peter Jan
Published: (1989)

Optimum rotor blade configurations for minimum oscillatory root bending moment
by: Khattab, M. I. A.
Published: (1985)