$Smoke characterisation by laser diffraction$

Smoke characterisation by laser diffraction

Bibliographic Details
Main Author:	Geake, Peter John
Published:	London South Bank University 1988
Subjects:	620.86 Smoke testing methods
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.329148

Similar Items

The behaviour of steel and composite beam-to-column connections in fire
by: Al-Jabri, Khalifa Saif
Published: (1999)

The additives as flame retardants and smoke suppressants for polyester thermosets
by: Moth, Penelope Anne
Published: (1992)

Intelligent system selection for safety-related applications
by: Martin, Lesley
Published: (2007)

Development of damage detection algorithms for structural systems based on structural dynamic data
by: Zumpano, Giuseppe
Published: (2005)

Development and application of global sensitivity analysis methods in environmental and safety engineering
by: Ziehn, Tilo
Published: (2008)

Establishing confidence in safety assessment evidence
by: Sun, Linling
Published: (2012)

Quantification of smoke produced in fires
by: Abdul Reheem, Faiz F.
Published: (1985)

The downward movement of smoke due to a sprinker spray
by: Williams, Corinne
Published: (1993)

A risk assessment methodology for the use of lasers in the entertainment industry
by: O'Hagan, John B.
Published: (1998)

A study of the effect of tunnel aspect ratio on control of smoke flow in tunnel fires
by: Bakar, M. Z. Abu
Published: (1999)

Alumina trihydrate as a fire retardant for ethylene vinyl acetate copolymer
by: Okpe, Owoicho
Published: (1988)

Potential hazards associated with combustion of polymer composite materials and strategies for their mitigation
by: Morrey, Emmajane Louise
Published: (2001)

A systematic investigation of the influence of phosphorus containing groups on the flame retardance of acrylic thermoplastics
by: Konkel, Christopher Stewart
Published: (2000)

A study into the incidence of equestrian injuries and the performance of protective equipment
by: Whitlock, Michael
Published: (1999)

The behaviour and design of transversely stiffened plates subject to in-plane shear forces
by: Stanway, Graeme Scott
Published: (1990)

Computer simulation of the tipping action of large tipper lorries
by: Aughton, Peter
Published: (1993)

The mathematical modelling of the interaction between sprinkler sprays and the thermally buoyant layers of gases from fires
by: Gardiner, A. J.
Published: (1988)

A methodology for the design of safety critical mechatronics
by: Bleakley, Graham John
Published: (1999)

The reconstruction of fires involving highly flammable hydrocarbon liquids
by: DeHaan, John David
Published: (1995)

The evolution and design of safety management systems
by: Kingston-Howlett, John C.
Published: (1996)

Hazardous installations and public safety controls
by: Floyd, Peter John
Published: (1988)

Modelling the dynamic response of emergency shut-down valves following full bore rupture of long pipelines
by: Saha, Pratik
Published: (1998)

Construction safety in Hong Kong : the development of models for the safety performance assessment of major contractors
by: Wong, Francis Kwan Wah
Published: (2000)

The application of fire safety of architectural design
by: Cerda, M. A.
Published: (1981)

A fire safety evaluation points scheme for dwellings
by: Shields, T. J.
Published: (1991)

Egress capabilities of people with disabilities
by: Boyce, Karen E.
Published: (1996)

Some contributions to the further development of fire safety engineering
by: Silcock, Gordon William Henry
Published: (1998)

Investigation into the effectiveness of non-conventional lightning protection
by: Evans, Joanne Caroline
Published: (2001)

Application of quantified risk assessment to the building fire safety problem
by: Hay, Adrian
Published: (1992)

Knowledge based systems for decision support in emergency situations
by: Lycett, James Edward
Published: (1992)

Safe storage of combustible solids
by: Bidgood, Christopher M.
Published: (1993)

Vulnerability and reliability of structural systems
by: Hashimoto, Mitsuyuki
Published: (1994)

An adaptive response surface method for engineering analysis
by: Kaymaz, Irfan
Published: (2000)

Foam formation in low expansion fire fighting equipment
by: Rogers, Lucy Elizabeth
Published: (2001)

Transient numerical investigation into whiplash injury and the effects on the cervical spine
by: Heitplatz, Frank
Published: (1999)

Three-dimensional dynamic modelling of the human cervical spine in whiplash situations
by: Golinski, Waldemar Z.
Published: (2000)

Aerosol explosion hazard quantification
by: Cameron, Lee R. J.
Published: (1999)

Formal safety analysis methods and their application to the design process
by: Wang, Jin
Published: (1995)

The influence of semi-rigid connections on the performance of steel framed structures in fire
by: Leston-Jones, Lee Christopher
Published: (1997)

An investigation into chemistry laboratory safety practices in educational institutions in Nigeria
by: Ezeugbor, G. I.
Published: (1986)

Cannot write session to /tmp/vufind_sessions/sess_bhr7m4eh0nv7md5v6uul6h943a