The analysis of ultrasonic machining systems using wholefield interferometric techniques

The analysis of ultrasonic machining systems using wholefield interferometric techniques

Bibliographic Details
Main Author:	Petzing, Jon
Published:	Loughborough University 1996
Subjects:	621.8 Ultrasonic cutting systems
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.321203

Similar Items

Oil transmissions pipelines condition monitoring using wavelet analysis and ultrasonic techniques
by: AbuShanab, Waheed Sami
Published: (2013)

The deformation of carbide cutting tools
by: Bell, Stephen Brooke
Published: (1988)

Novel robust control of damping oscillations in power systems with multi-machine wind farms
by: Peng, Y.
Published: (2014)

A generalised approach to machine control
by: Harrison, Robert
Published: (1991)

Development of an optimum pipeline renovation using Cured-In-Place Pipe (CIPP) techniques
by: Razmara, Mohammad
Published: (2008)

Investigation of novel variable flux reluctance machine characteristics
by: Liu, Xu
Published: (2013)

Optimisation of a high-energy loss control valve trim using computational and experimental techniques
by: Morton, Karen M.
Published: (2003)

An investigation of high speed and power permanent magnet synchronous machines
by: Mehna, Ali A. Ahmed Omran
Published: (2011)

Control of machine drives for varying inertia systems
by: Kaipio, Tero
Published: (2000)

On-line condition monitoring of power press tooling using ultrasonics
by: Bathe, Martin J.
Published: (1992)

Ice slurry diagnostics through electromagnetic wave attenuation and other techniques
by: Hales, Alastair James
Published: (2015)

Real-time dynamic substructuring for mechanical and aerospace applications : control techniques and experimental methods
by: Wallace, Max Ian
Published: (2005)

Studies in the excavation of selected rock materials with mechanical tools
by: Hekimoglu, Osman Zeki
Published: (1984)

A study of instrumentation systems for the dynamic analysis of machine tools
by: Taylor, H. R.
Published: (1975)

The dynamic characteristics of pneumatic actuator and value systems
by: Bauaud, Richard Leslie
Published: (1974)

Computational intelligence for fault diagnosis in gearbox systems
by: Alkhadafe, H.
Published: (2015)

The flexibility of piping systems : an experimental investigation of the stresses and end reactions in full-scale piping systems caused by thermal expansion and other movements
by: Smith, Raymond Thomas
Published: (1965)

Condition monitoring of belt based motion transmission systems
by: Notini, Luca
Published: (2005)

Computer analysis and economic design of pipe networks
by: Barlow, John Francis
Published: (1970)

Response of two-dimensional piping systems during pipe whip
by: Wang, B.
Published: (1991)

Predictive condition monitoring of industrial systems for improved maintenance and operation
by: Ruiz Cárcel, Cristóbal
Published: (2014)

Efficient finite element simulation of full-system elastohydrodynamic lubrication problems
by: Ahmed, Sarfraz
Published: (2012)

Numerical modelling and in-process expert system for the assessment of large scale seals
by: Abubake Jimoh, Ismail
Published: (2015)

Effect of bearing constraints on the whirling characteristics of a multi-rotor system
by: Bosworth, R.
Published: (1966)

Constraint analysis and theoretical development of multi-furcation and reconfiguration in mechanisms
by: Qin, Yun
Published: (2013)

Sensorless control strategies for low-cost, high-speed electrical drive systems
by: Bateman, Christopher John
Published: (2010)

Large displacement numerical analysis of offshore pipe-soil interaction on clay
by: Kong, Deqiong
Published: (2015)

Electroplated composite coatings with incorporated nano particles for tribological systems with the focus on water lubrication
by: Bajwa, Rizwan
Published: (2016)

Measurement and visualisation of slurry flow using electrical resistance tomography
by: Faraj, Yousef
Published: (2013)

Data-driven methodologies for bearing vibration analysis and vibration based fault diagnosis
by: Al-Bugharbee, Hussein Razzaq
Published: (2016)

A study of the influence of machining variations on the capability, selection and economic use of a group of machine tools
by: Marsh, R.
Published: (1982)

Analytical modelling and analysis of magnetic gears and pseudo direct drives for large wind turbines
by: Penzkofer, Andreas
Published: (2016)

Design and analysis of the SVOBODA mechanism as a hybrid machine
by: Greenough, Jeremy David
Published: (1996)

Fault diagnostics for advanced cycle marine gas turbine using genetic algorithm
by: Sampath, Suresh
Published: (2003)

The use of porous metal restrictors in externally pressurised gas lubricated thrust bearings
by: McCrea, John Raymond
Published: (1977)

Analysis of dynamical performance and contact for a high speed thrust bearing including slip effects
by: Bailey, Nicola Y.
Published: (2015)

Analysis of machine tool structures by the finite element method
by: Hinduja, S.
Published: (1971)

Analysis of the tribological behaviour of stainless and ball bearing steels sliding in the presence of sulphur extreme-pressure additives
by: Dawud, Sattar J.
Published: (1985)

PC based diagnostic system for the condition monitoring of rotating machines
by: Neill, Gary David
Published: (1998)

Fault detection and diagnosis of a multistage helical gearbox using magnitude and phase information from vibration signals
by: Gu, James Xi
Published: (2016)

Cannot write session to /tmp/vufind_sessions/sess_brkor1mid5l1uf33dqee9btbo0