A design criterion for maintaining contact at a revolute joint with clearance

A design criterion for maintaining contact at a revolute joint with clearance

Bibliographic Details
Main Author:	Seneviratne, Lakmal D.
Published:	King's College London (University of London) 1985
Subjects:	621.8 Journal bearings
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.320408

Similar Items

Transient response to flexible rotor-bearing systems subjected to combined unbalance and ground excitations
by: Cheung, J. O.
Published: (1988)

Theoretical and experimental studies of the effect of clearance and geometry in hydrodynamic journal bearings
by: Dyer, D.
Published: (1973)

The behaviour of reciprocating metallic clearance seals at high pressure
by: Gray, Michael John
Published: (1976)

Mathematical modelling of vibrations in spindle bearing assemblies
by: Rahman, Aminur Khosru
Published: (1998)

Performance studies of oil lubricated helical groove journal bearing
by: Khan, Muhammad Zubair
Published: (1992)

High-speed performance of a hydrostatic thrust bearing
by: Ashman, D.
Published: (1987)

Control of vibration in a flexible rotor-bearing system
by: Baseer, M. A.
Published: (1990)

Modelling and identification of dynamic characteristics of a squeeze-film bearing
by: Kucuk, N. C.
Published: (1987)

In-situ interface chemical characterisation of a boundary lubricated contact
by: Rai, Yugal
Published: (2015)

Raman spectroscopy of lubricated line contacts
by: Taylor, Stephen Ronald
Published: (1981)

Prediction of contact fatigue for the rough surface elastohydrodynamic lubrication line contact problem under rolling and sliding conditions
by: Qiao, Hua
Published: (2005)

An experimental investigation of the dynamic behaviour of an externally pressurized thrust bearing
by: Alabraba, M.
Published: (1985)

Condition monitoring of reciprocating compressors and rolling element bearings
by: Johnston, Andrew Beaton
Published: (1985)

Vibration control in rotating machinery using variable dynamic stiffness hydrostatic squeeze-films
by: Roach, M. P.
Published: (1990)

Sliding bearings in highway bridges and elevated roads
by: Taylor, M. E.
Published: (1975)

The performance of heavily loaded journal bearings for use in power plant
by: Ives, David
Published: (1990)

An investigation into fluid film lubrication in dynamically loaded bearings
by: Paydas, Atil
Published: (1998)

Temperatures and friction at lubricated rolling/sliding contacts
by: Manton, S. M.
Published: (1969)

Tribology of polymers and composites in unlubricated rolling and sliding contact
by: Chen, Yong Kang
Published: (1996)

An investigation into the fundamentals of microslip and wear in rolling contact bearings
by: Bremble, G. R.
Published: (1969)

Analysis of dynamical performance and contact for a high speed thrust bearing including slip effects
by: Bailey, Nicola Y.
Published: (2015)

Finite-volume CFD modelling of fluid-solid interaction in EHL contacts
by: Hajishafiee, Alireza
Published: (2013)

Experimental investigation into the influence of roughness on friction and film thickness in EHD contacts
by: Guegan, Johan
Published: (2015)

Numerical modelling of through-thickness reinforced structural joints
by: Bianchi, Francesco
Published: (2012)

Heat partition in elastohydrodynamic sliding contacts under full film lubrication conditions
by: Clarke, Alastair
Published: (2009)

Wheel/rail contact tribology : characterising low adhesion mechanisms and friction management products
by: Buckley-Johnstone, Luke
Published: (2017)

Plastic deformation and residual stress of surface roughness asperities in elastohydrodynamic contact with consideration of surface fatigue
by: Al-Mayali, Maasi
Published: (2017)

Strength prediction of mechanical joints in composite laminates based on subcritical damage modelling
by: Atas, Akin
Published: (2012)

Elastohydrodynamic lubrication of point contacts for layers of "soft" solids and for "monolithic" "hard" materials in the transient bouncing ball problem
by: Wang, Ducai
Published: (1994)

Mixed elasto-hydrodynamic lubrication in metal-on-metal hip joints under transient loading and motion conditions
by: Gao, Leiming
Published: (2009)

An investigation of the dynamic behaviour of floating ring bearing systems and their application to turbogenerators
by: Leung, P. S.
Published: (1988)

Highly loaded hybrid journal bearings
by: Elliott, Tony William
Published: (1989)

Dynamics of a rigid shaft supported by angular contact ball bearings
by: Akturk, Nizami
Published: (1993)

The design and optimization of slot hybrid journal bearings
by: Koshal, D.
Published: (1978)

The design of coinage metal and pnictogen architectures
by: Stonor, Andrew James
Published: (2015)

Computer analysis and economic design of pipe networks
by: Barlow, John Francis
Published: (1970)

Ultra deep water pipe bend design guidelines
by: El-Gebaly, Sherif H.
Published: (2016)

Design of robust PTFE faced bearings for performance and reliability in large rotating machinery
by: Rothwell, Benjamin Charles
Published: (2016)

Dynamic performance of a double poppet valve flow controller
by: Abdul-Ahad, D. N.
Published: (1977)

A depth-averaged model for non-isothermal rimming flow driven at the surface by droplet impact
by: Kay, E. D.
Published: (2014)