Rapid crack propagation in polyethylene gas pipes

Rapid crack propagation in polyethylene gas pipes

Bibliographic Details
Main Author:	Yayla, Pasa
Published:	Imperial College London 1991
Subjects:	621.69 Pipelines
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.318486

Similar Items

The mechanical behaviour and fatigue analysis of flexible pipes
by: Chen, Zhenxin
Published: (1990)

An assessment of the performance of high density polyethylene copolymers for natural gas distribution pipes
by: McNally, Paul F.
Published: (1980)

Ductile-brittle transitions in pipe grade polyethylene
by: Morgan, Robert Edward
Published: (1994)

The influence of the accumulation of deformation on the failure of polyethylene pipe materials
by: Ward, Andrew L.
Published: (1994)

Pipebursting : model tests
by: Swee, James Lee Kong
Published: (1991)

Stabilisation of medium density polyethylene gas pipe in service applications
by: Palmer, Simon J.
Published: (1989)

Fluid/structure interaction in dynamic crack propagation problems
by: Caldis, E. S.
Published: (1982)

Ground cracking and frost heaving associated with chilled gas pipeline operations in Britain
by: Greene, Denis P.
Published: (1992)

Stress analysis and design of some pressure vessel and piping components
by: Moffat, Douglas G.
Published: (2000)

Investigation of the flow in an idealised inlet port/poppet valve assembly
by: Ahmed, Ashraf Mohamed Yossri
Published: (1986)

Experimental and analytical studies of conventional (gasketed) and unconventional (non-gasketed) flanged pipe joints
by: Abid, Muhammad
Published: (2001)

Variable conductance heat pipes
by: Fulford, D. J.
Published: (1989)

Mass transfer and erosion-corrosion in pipe bends
by: Sprague, P. J.
Published: (1984)

The response of buried uPVC pipes to surface loading
by: Rogers, C. D. F.
Published: (1985)

Solutions to the Navier-Stokes equation set for spiral pipes
by: Mosley, Nile Spencer
Published: (1996)

Vibration transmissibility characteristics of fibre and steel reinforced flexible pipes
by: Kennedy, I.
Published: (1987)

Glass reinforced plastic pipe bends under a variety of loads
by: Myler, P.
Published: (1985)

The behaviour of thin walled pipes in trenches
by: Bueno, Benedito de Souza
Published: (1987)

Vitrified clay pipes installed by trenchless techniques
by: Husein, Nasib Mahmoud
Published: (1989)

Pipe design for improved particle distribution and improved wear
by: Raylor, Benjamin
Published: (1998)

Inelastic collapse of pipes under external pressure and bending
by: Tay, C. J.
Published: (1978)

Strength and flexibility of glass reinforced plastic pipes and pipe bends
by: Tan, A. L.
Published: (1983)

The analysis of piping systems on a microcomputer using pipe bend elements
by: See, P. S.
Published: (1985)

The influence of end constraints on pipe bends : a study of smooth pipe bends with flange and tangent pipe end constraints under in-plane bending
by: Thomson, Gordon
Published: (1980)

An experimental and numerical study of plug formation in vertical pipes during cryogenic pipe freezing
by: Burton, M. J.
Published: (1986)

Low velocity transverse impact of filament wound E-glass/epoxy resin pipes
by: Ainsworth, Kim
Published: (1991)

A study on pipe bends : an analysis of the smooth pipe bend with flanged end constraints under out-of-plane bending and the development of experimental techniques in the creep of pipe bends
by: Rae, Kenneth
Published: (1984)

An experimental study of ice formation in pipes
by: Bowen, Richard James
Published: (2000)

Analysis and design of buried flexible pipes
by: Gumbel, J. E.
Published: (1983)

Creep of pipe bends with end constraints
by: Chan, C. K. L.
Published: (1984)

Simulation and measurement of transients in pipes and compressors
by: Boroomand, Masoud
Published: (1992)

The asset lives of plastic pipes : technical and economic factors affecting the in-service life of pressurised polymer pipes in the water industry
by: Mason, Nicholas Scott
Published: (1998)

The motion of air cavities in water filled pipes
by: Ali, Salah Taofeek
Published: (1988)

The design and analysis of pipe diffusers for centrifugal compressors
by: Bennett, Ian
Published: (1997)

Internal linings of pipes to achieve energy conservation
by: Chu, C. Y.
Published: (1983)

Residual stresses in girth butt welded pipes
by: Scaramangas, A.
Published: (1984)

An experimental and analytical study of pipe-soil interaction
by: Sehmi, H. S.
Published: (1986)

A study of single mitre pipe bends
by: Wood, J.
Published: (1983)

Behaviour of pressurised pipes containing dents and gouges
by: Lancaster, Earl Royland
Published: (1994)

Liquid-liquid dispersed flows in horizontal pipes
by: Angeli, Panagiota
Published: (1996)

Cannot write session to /tmp/vufind_sessions/sess_d6ogvohbnvicjlbtt0a8vmfvbn