Development of novel ceramic processing techniques for manufacturing of heart valves : investigating the use of powder reaction injection moulding engineering (PRIME) for the manufacture of novel, seam-free ceramic heart valves

Development of novel ceramic processing techniques for manufacturing of heart valves : investigating the use of powder reaction injection moulding engineering (PRIME) for the manufacture of novel, seam-free ceramic heart valves

Bibliographic Details
Main Author:	Ridgway, Jonathan S.
Published:	Nottingham Trent University 2000
Subjects:	670 Prosthesis
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.310856

Similar Items

Large section ceramic injection moulding
by: Krug, Steffen
Published: (2000)

A manufacturing model to capture injection moulding process capabilities to support design for manufacture
by: Al-Ashaab, Ahmed H. S.
Published: (1994)

Experimental substantiation of the design of a prosthetic heart valve for «valve-in-valve» implantation
by: K. Yu. Klyshnikov, et al.
Published: (2017-06-01)

Structural stability of novel composite heart valve prostheses - Fatigue and wear performance
by: Han Zhou, et al.
Published: (2021-04-01)

Some aspects concerning the powder injection moulding of hardmetal components
by: Martyn, Michael T.
Published: (1991)

Shell assisted layer manufacturing : a novel process for rapid prototyping, tooling and manufacturing
by: Egodawatta, Ajantha Kithsiri
Published: (2007)

Economic manufacture of freeze-cast ceramic substrate shapes for the spray-forming process
by: Statham, Michael J.
Published: (1998)

Manufacture of novel bearings by laser
by: Xiao, Di-Chen
Published: (1994)

A Novel Sensorized Heart Valve Prosthesis: Preliminary In Vitro Evaluation
by: Emanuela Marcelli, et al.
Published: (2018-11-01)

In vitro assessment of prosthetic heart valves in the mitral and aortic positions
by: Williams, Franklin Pierce
Published: (2006)

An investigation into weld lines in thermoplastic injection moulding
by: Stidworthy, Paul
Published: (1998)

On-line monitoring and control of the injection moulding process
by: Fronimidis, Dimitris
Published: (2007)

Bioprosthetic valve thrombosis in carcinoid heart disease
by: Kimberly Naden Hollander, et al.
Published: (2019-01-01)

A novel polymeric prosthetic heart valve : design, manufacture, and testing
by: Brubert, Jacob
Published: (2016)

Hydrodynamic performance of mechanical and biological prosthetic heart valves
by: Bishop, Winona F.
Published: (2010)

Cryogenic gas-assisted injection moulding
by: MagalhaÌƒes, Rui
Published: (2002)

Carbon deposition for artificial heart valves using liquid reagent CVD
by: Watson, Stuart Kent
Published: (2007)

Clinical behavior and evolution of prosthetic heart valve dysfunction. Five years experience.
by: Lázaro E. de la Cruz Avilés, et al.
Published: (2011-01-01)

Tissue Engineering Heart Valves – a Review of More than Two Decades into Preclinical and Clinical Testing for Obtaining the Next Generation of Heart Valve Substitutes
by: Dan SIMIONESCU, et al.
Published: (2021-09-01)

Quadruple Valve Replacement for Carcinoid Heart Disease
by: Syed Saleem Mujtaba, et al.

Toward Growth-Accommodating Polymeric Heart Valves with Graphene-Network Reinforcement
by: Li, Richard
Published: (2021)

Fabrication related variations in property in injection mouldings
by: O'Donnell, Brendan
Published: (1990)

An injection moulding strategist in an information model environment
by: Lee, Ronan John Vincent
Published: (1996)

Hydraulic pressure and flow control of injection moulding
by: Guerrier, Paul Keith
Published: (2001)

Pressure sensor emulator to improve longterm stability of heart valve testing systems
by: Schmidt Wolfram, et al.
Published: (2019-09-01)

POLYMERIC HEART VALVE PROSTHESES: CONDITION AND PERSPECTIVES
by: M. A. Rezvova, et al.
Published: (2018-06-01)

Transcatheter Valve-in-Valve Procedures for Bioprosthetic Valve Dysfunction in Patients With Rheumatic vs. Non-Rheumatic Valvular Heart Disease
by: Mariana Pezzute Lopes, et al.
Published: (2021-08-01)

Characterization of ceramic powders used in the inCeram systems to fixed dental Prosthesis
by: Alexandra Almeida Diego, et al.
Published: (2007-03-01)

Development of binder systems based on CAB for powder injection moulding (PIM) and micro powder injection moulding (µ-PIM) of Zircon and Invar powders
by: Hidalgo Garcia, Javier
Published: (2014)

Experimental study of simultaneous co-injection moulding process
by: Somnuk, Peerawat
Published: (1995)

Experimental Validation of a Cardiac Simulator for in vitro Evaluation of Prosthetic Heart Valves
by: Ovandir Bazan, et al.

Numerical simulation of steady turbulent flow through aortic trileaflet heart valves
by: Stevenson, Dana Marie
Published: (2006)

Process technology for firing ceramic products with microwave energy
by: Bratt, Maurice John
Published: (1995)

In Vitro velocity and shear stress measurements in the vicinity of prosthetic measurements in the vicinity of prosthetic heart valves
by: Woo, Yi-Ren
Published: (2006)

“VALVE-IN-VALVE” REPROSTHESING OF CARDIAC ARTIFICIAL VALVES
by: R. Yu. Klyshnikov, et al.
Published: (2016-11-01)

Fibre reinforced ceramic moulding composites manufacture and characterisation
by: Ren, Guogang
Published: (1999)

The sintering of nitrogen ceramics
by: Hampshire, Stuart
Published: (1980)

Alternative causes of bioreaction to prosthetic heart valves: three cases with pannus formation
by: Süleyman Karakoyun, et al.
Published: (2014-02-01)

Aqueous injection moulding of ceramics
by: Huzzard, Roy
Published: (2002)

Manufacturing and Performance Evaluation of Polyurethane Artificial Heart Valve
by: Ruei-Lang Chen, et al.
Published: (2003)