Fabrication related variations in property in injection mouldings

Fabrication related variations in property in injection mouldings

Bibliographic Details
Main Author:	O'Donnell, Brendan
Published:	University of Newcastle Upon Tyne 1990
Subjects:	670 Industrial processes & manufacturing processes
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.303356

Similar Items

Cryogenic gas-assisted injection moulding
by: MagalhaÌƒes, Rui
Published: (2002)

Hydraulic pressure and flow control of injection moulding
by: Guerrier, Paul Keith
Published: (2001)

Experimental study of simultaneous co-injection moulding process
by: Somnuk, Peerawat
Published: (1995)

Some aspects concerning the powder injection moulding of hardmetal components
by: Martyn, Michael T.
Published: (1991)

Computer-aided estimating of production tooling costs with particular reference to injection moulds
by: Walshe, K. B. A.
Published: (1986)

Modelling injection stretch blow moulding and the resulting 'in service' performance of PET bottles
by: Menary, Gary Henry
Published: (2001)

A computer-aided analysis of polyolefins mixing quality parameters associated with injection moulding
by: Latif, Laith Hussein Ameer
Published: (1991)

An investigation into the use of slip casting of 316L stainless steel as a method of forming injection moulding tools
by: Ainsley, C. C.
Published: (1997)

Computer simulation of rotational moulding
by: Wang, Xuanmin
Published: (1995)

Rotational moulding of reactive plastics
by: Harkin-Jones, Eileen M. A.
Published: (1992)

The dimensional control of rotationally moulded products
by: Walls, Kevin Oliver
Published: (1998)

Rotational moulding of thick wall products
by: Xu, Liang
Published: (1994)

An investigation of heating methods for the rotational moulding of plastics
by: Wright, M. J.
Published: (2001)

Analysis of bubble formation and removal in rotationally moulded products
by: Spence, Alvin George
Published: (1994)

Some effects of machine characeristics on the surface quality of planed and spindle moulded wooden products
by: Jackson, M. R.
Published: (1986)

A study of injection forming
by: Islam, Yousuf Mahboobul
Published: (1988)

An expert system for optimised process planning in fabrication and welding
by: Abou-Ali, Mohamed
Published: (1991)

Economic control of steel fabricated components at the design stage
by: Shadravan, Iraj
Published: (1983)

The use of electron beam lithography and chemical etching for the fabrication of micromechanical structures
by: Lutwyche, Mark Ian
Published: (1991)

Fabrication of metal matrix composites by low pressure liquid metal infiltration
by: Trumper, Richard Leslie
Published: (1993)

The aerodynamic profile loss associated with coolant injection through discrete hole and transpiration cooled surfaces
by: Proctor, R.
Published: (1982)

Cost prediction modelling of batch production in a manufacturing system for sheet metal fabrication
by: Bera, H.
Published: (1984)

A study mehtods for increasing the rate of production of double jersey fabrics by the use of multi-feed feeders
by: Ramaswamy, S.
Published: (1981)

A theoretical and experimental investigation into the variation of process parameters in the laser heating, melting and welding processes
by: Clucas, D. A. V.
Published: (1997)

Geometrical properties of strip produced by plasto-hydrodynamic drawing
by: Stokes, Mark Richard
Published: (1994)

Joining metal matrix composites and related alloys
by: Lindsay, Neil J.
Published: (1993)

The effect of joining technique on the mechanical properties of stainless steel structures
by: Nex, Christopher Paul
Published: (1997)

The optimisation of structure property relationships in class 60, grey iron Yankee dryer shells
by: Blackie, A. P.
Published: (1983)

A study of cotton-weaving in Bangladesh : the relative advantages and disadvantages of handloom weaving and factory production
by: Chowdhury, N.
Published: (1982)

Static hole flanging, dynamic piercing and related loading of thin metal and hot roll-bonded composite metallic plates
by: Wong, M. K.
Published: (1980)

Fume formation in electric arc welding : the mechanism of fume formation in gas shielded electric arc welding, and the characterization of its physical and chemical composition with relation to industrial health hazards
by: Gray, C. N.
Published: (1980)

Adaptive vibration control using squeeze film bearing
by: Turkay, O. S.
Published: (1982)

Electromagnetic stirring in the continuous casting of molten metal
by: Ogbogu, S. O. E.
Published: (1986)

The use of pulsed current to control the weld profile and metal transfer in the submerged arc welding process
by: Ismail, O. A. A.
Published: (1982)

Coking and regeneration of catalyst pellets
by: Nascimento, C. A. O. do
Published: (1982)

Fused salt electrorefining of zinc
by: Driscoll, Kelly J.
Published: (1990)

A process monitoring system to optimize cutting conditions in turning
by: Arsecularatne, Joseph Alexander
Published: (1990)

Incremental forming of flanged sheet metal components
by: Powell, Nicholas Newton
Published: (1990)

The extrusion limits, parameters and microstructures of aluminium 2014 solid and powder
by: Shi, Heying
Published: (1990)

Stainless steel cladding of mild steel shafts using pulsed metal-inert-gas welding techniques
by: Kalligerakis, Kostas
Published: (1990)

Cannot write session to /tmp/vufind_sessions/sess_981o1kim39i1h34aot2lvjhjdd