The grinding of polyethylene powders for use in rotational moulding

The grinding of polyethylene powders for use in rotational moulding

Bibliographic Details
Main Author:	McDaid, Julia
Published:	Queen's University Belfast 1998
Subjects:	624.1 Structural engineering
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.263463

Similar Items

Powders subject to changes in principal stress direction using the Biaxial Tester
by: Jamebozorgi, Mehrdad
Published: (1997)

Buckling of rotationally symmetric shells
by: Zintilis, G. M.
Published: (1980)

Moment-rotation behaviour of steel beam-to-column connections
by: Celikag, Murude
Published: (1989)

The prediction of moment-rotation curves of extended endplate connections for use in semi-rigid analysis of steel frameworks
by: O'Connor, Mark Anthony
Published: (1991)

Stress and strain in sand caused by rotation of a model wall
by: Bransby, Peter Leigh
Published: (1968)

The mechanics of thin walled structures, with special reference to finite rotations
by: Bates, David Nicholas
Published: (1987)

Ultimate moment of resistance and moment-rotation characteristics of unbonded prestressed concrete beams
by: Pannell, F. N.
Published: (1964)

The reinforcement of concrete structures using high strength polyethylene
by: Kamal, Monir M.
Published: (1983)

Optimisation of the design of structures using sensitivity analysis
by: McCafferty, R.
Published: (1985)

Linear and geometrically nonlinear analysis of thin rotational shells using the finite element method
by: Peshkam, Vahigh
Published: (1984)

Integrity assessment of structures using modal testing
by: Armstrong, Donald Matthew
Published: (1994)

The use of the method of caustics for the study of contact problems
by: Carazo-Alvarez, J. D.
Published: (1996)

The design of structures using glass reinforced polyester
by: Ulku, Sedat
Published: (1981)

The development and application of a high sensitivity moire interferometer for whole-field stress analysis
by: McDonach, A.
Published: (1983)

The modelling of structural steelwork using interactive computer graphics
by: Cope, Martyn John
Published: (1983)

Mixed dimensional coupling and error estimation in finite element stress analysis
by: McCune, Robert Willard
Published: (1998)

Structural characteristics of multicable suspension bridge configurations
by: McKay, R. N.
Published: (1982)

The development and application of the pull-off test for concrete strength
by: Murray, A. McC.
Published: (1984)

Experimentally-derived structural models for use in further dynamic analysis
by: Duarte, Maria Lucia Machado
Published: (1996)

Inelastic stability of plate structures using the finite strip method
by: Mahmoud, Nabil S.
Published: (1981)

Validation of large structural dynamics models using modal data test
by: Imamovic, Nedzad
Published: (1998)

Lamb wave inspection of large structures using permanently attached transducers
by: Wilcox, Paul David
Published: (1998)

An investigation of soil nail reinforcement using a large direct shearbox
by: Jacobs, Colin D.
Published: (1993)

Analysis of shallow and deep foundations using soil-structure interaction techniques
by: Jones, Anthony James
Published: (1991)

Structural vibration transmission in framed buildings using statistical energy analysis
by: Steel, J. A.
Published: (1990)

Wave forces on large offshore structures using boundary element methods
by: Au, M. C.
Published: (1982)

The systematic improvement of vibrating structures using computer based tests and predictions
by: Stassis, A.
Published: (1986)

Behaviour and design of structures using thin-walled cold-formed sections
by: Buhagiar, Spiridione
Published: (1993)

An investigation of the use of B-spline shaped functions for the analysis of large deformations of structures
by: You, C. F.
Published: (1987)

Model updating of large structural dynamics models using measured response functions
by: Grafe, Henning
Published: (1999)

Shear wall-frame interaction analysis using finite strip and continuum methods
by: Te, Seng-Bee
Published: (1989)

A study of the behaviour of vertical rock anchors using the finite element method
by: Yap, Leong Ping
Published: (1980)

Shear strengthening of reinforced concrete beams using externally bonded carbon fibre reinforced plates
by: Abdel-Jaber, Ma'en
Published: (2001)

The behaviour of polyurethane foam beams reinforced with thin walled steel sections for use in bus structures
by: Gaafar, M. L. A.
Published: (1980)

The monitoring of Portland cement concrete and mortar using acoustic emission stimulated by loads of low magnitude
by: Pomeroy, A. R.
Published: (1983)

Use of laser Doppler anemometer measurements near model buildings to determine wind loading on building attachments
by: Minson, A. J.
Published: (1993)

Stability analysis of light gauge steel members using the finite element method and the generalized beam theory
by: Jiang, Chunxu
Published: (1994)

Stress analysis of spherical shells with one and/or two neighbouring nozzles using internal pressure and external loadings by finite element method : a parametric survey
by: Naderan-Tahan, Khosro
Published: (1989)

The structural behaviour of brick sewer pipes in soft ground : the examination of brick and reinforced plastic pipes, in granular soil, and under plane strain conditions, using fully non-linear finite element models and a large-scale physical testing prog
by: Matthews, Russell Stuart
Published: (1985)

Through-column-flange crack initiation in welded beam-to-column connections with reference to observations from the 1994 Northridge earthquake
by: Righiniotis, Timothy
Published: (1998)

Cannot write session to /tmp/vufind_sessions/sess_oqbh6fho8qqm4o8ln7ges3bit0