| Summary: | One of the fundamental problems of sonar systems is the determination of the bearings of underwater sources/targets. The classical solution to this problem, the 'Conventional Beamformer', uses the outputs from the individual sensors of an acoustic array to form a beam which is swept across the search sector. The resolution of this method is limited by the beam width and narrowing this beam to enhance the resolution may have some practical problems, especially in low frequency sonar, because of the physical size of the array needed. During the past two decades an enormous amount of work has been done to develop new algorithms for resolution enhancements beyond that of the Conventional Beamformer. However, most of these methods have been based on computer simulations and very little has been published on the practical implementation of these algorithms. One of the main reasons for this has been the lack of hardware that can handle the relatively heavy computational load of these algorithms. However, there have been great advances in semiconductor and computer technologies in the last few years which have led to the availability of more powerful computational and storage devices. These devices have opened the door to the possibility of implementing these high-resolution Direction Finding (DF) algorithms in real sonar systems. The work presented in this thesis describes a practical implementation of some of the high-resolution DF algorithms in a simple sonar system that has been designed and built for this purpose.
|
|---|
