Optimisation of reciprocating compressor design

Optimisation of reciprocating compressor design

Bibliographic Details
Main Author:	Hoare, R. G.
Published:	University of Strathclyde 1982
Subjects:	621.43 Reciprocating engines
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.257767

Similar Items

Experimental evaluation of compressor variable geometry in a turbocharger compressor
by: Sutton, Anthony James
Published: (1986)

Cavitation erosion damage in plain bearings for reciprocating internal combustion engines
by: James, R. D.
Published: (1981)

Digital simulation of turbocharged diesel engine with air injection into the compressor
by: Furukawa, H.
Published: (1972)

Analysis of flow evolution in the cylinders of motored reciprocating engines
by: Ahmadi-Befrui, Bizhan
Published: (1985)

Structural optimization of reciprocating engines for minimum noise radiation
by: Zhang, Tianwen
Published: (1992)

Self tuning optimisation of automotive engines
by: Scotson, P. G.
Published: (1986)

Evaluation and optimisation of performance if a closed cycle diesel engine with exhaust gas chemical processing
by: Al-Mosawy, R. M.
Published: (1983)

Investigation into the optimisation of fuel consumption in spark ignition four stroke engines
by: Mahmmud, Faiz
Published: (1996)

The assessment and optimisation of spark ignition engine performance during cold operation
by: Duggleby, Paul Alfred
Published: (1997)

Optimising the control of a passenger car diesel engine and continuously variable transmission
by: Deacon, Michael
Published: (1996)

Thermodynamic design of the Stirling engine
by: Jones, J. D.
Published: (1982)

Design of controllers for improving the transient performance of turbocharged diesel engines
by: Fisher, A. J.
Published: (1975)

Inlet port design and air motion in direct injection diesel engines
by: Sohrabi, A. A.
Published: (1980)

Design and testing of a high pressure chamber for diesel spray studies
by: McGlashan, Niall Ross
Published: (1997)

The design and development of a multi-cylinder, automotive, two-stroke cycle engine
by: Thornhill, David James
Published: (1992)

The design and construction of a stratified-charge, single cylinder, two-stroke cycle engine
by: Hill, Brian William
Published: (1982)

An investigation of the influence of bore/stroke ratio and cylinder design on scavenging in a two-stroke cycle, spark ignition engine
by: McNiff, Martin Peter
Published: (1993)

Investigations with a small air charged stirling engine including experiments on a range of regenerator materials and a methodology for stirling engine design
by: Mansoor, K.
Published: (1984)

Factors affecting the low speed torque of automotive diesel engines
by: Papadopoulos, G.
Published: (1986)

Simulation of diesel engine air flow
by: Kibble, G.
Published: (1970)

Prediction of flow in diesel engine cylinders
by: Johns, R. J. R.
Published: (1980)

Finite element modelling and dynamic substructuring for prediction of diesel engine vibration
by: Turner, G. L.
Published: (1983)

Instantaneous heat transfer in an opposed-piston two-stroke diesel engine
by: Law, A. G.
Published: (1968)

Study of the highly turbocharged diesel
by: Osborne, A. G.
Published: (1983)

Automated dynamic engine testing using a microcomputer
by: Brown, D. G.
Published: (1984)

The dynamic behaviour and feedback control of a turbocharged automotive diesel engine with variable geometry turbine
by: Backhouse, R. J.
Published: (1986)

Computer simulation of fuel injection for direct-injection diesel engines
by: Fairbrother, R. J.
Published: (1994)

Comparison between turbocharging and Comprex pressure exchanger supercharging of high output diesel engines
by: Aldis, Colin A.
Published: (1982)

Prediction of heat flow, temperature and stress in diesel engine pistons incorporating thermal barriers
by: Kao, Tseng-Kuan
Published: (1982)

Observation and measurement of fuel distribution within an S1 engine cylinder
by: Queenan, Kathleen Bernadette
Published: (1998)

Numerical computation of gas flow through an exhaust duct : an investigation of the exit boundary conditions
by: TitahMboh, Manases M.
Published: (1997)

Effect of piston bowl geometry on combustion and emissions of a direct injected diesel engine
by: Ellis, Mark Robert
Published: (1999)

Transient modelling of DI TCi diesel engine
by: Brace, Chris
Published: (1996)

Investigation of wastegate turbocharging systems for medium speed diesel engines
by: Yang, Jingbin
Published: (1994)

Experimental measurement and numerical simulation of induction port flow of a four-valve SI engine
by: Luo, Kai Hong
Published: (1992)

Manifold wave management
by: Roussopoulos, Kimon
Published: (1991)

Endwall profiling in axial flow turbines
by: Atkins, M. J.
Published: (1984)

Feedback control of transient smoke emissions from compression ignition engines
by: Hong, Guang
Published: (1988)

Spatially resolved turbulence measurement in internal combustion engines using flying hot wire velocimetry
by: Roughton, Ashley Wentworth
Published: (1989)

Mixture preparation process in S.I. engines with particular reference to an air assisted fuel vaporiser
by: Jackson, Simon David
Published: (1997)

Cannot write session to /tmp/vufind_sessions/sess_pr598urd3nk34q0qkm8fa39pa9