Investigation of the flow performance of automative close coupled catalyst on flow rigs and engines

Investigation of the flow performance of automative close coupled catalyst on flow rigs and engines

Bibliographic Details
Main Author:	Garcia, Amaya Arias
Published:	Coventry University 2002
Subjects:	629 Catalytic convertors
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.247185

Similar Items

Pulsating flow maldistribution in automotive exhaust catalysts : numerical modelling and experimental correlation
by: Liu, Zhi
Published: (2003)

A study of pulsating flow in automotive exhaust catalyst systems
by: Wollin, Johan
Published: (2002)

Removal of nitric oxide from natural gas vehicle exhausts
by: Ramli, Anita
Published: (1996)

An optical investigation into the effect of fuel spray, turbulent flow and flame propagation on DISI engine performance
by: Rimmer, John E. T.
Published: (2011)

An investigation into the use of a pendulum support rig for aerodynamic modelling
by: Kyle, Hilton
Published: (2004)

Investigation of a Fluidic Device for Cooling Flow Modulation in Gas Turbine Engines
by: Miniscloux, Glenn
Published: (2009)

An investigation into the thermal field associated with typical automobile engine-bay flow fields
by: Fleming, Andrew
Published: (2005)

An investigation of flow processes in a dual-intake motored engine in relation to gasoline direct injection engine operation
by: St. Hill, Nicholas
Published: (2002)

The effect of nozzle exit geometry on the aerodynamic performance of bypass flow of turbofan engines
by: Sloan, B.
Published: (2009)

A computational investigation into the effects of lipskin damage on inlet flow distortion in aircraft engines
by: Kennedy, Stefan Andrew
Published: (2011)

Determination of additives in fuels using automated flow injection analysis with chemiluminescence detection
by: Fletcher, Philip James
Published: (2002)

Rig design to provide flange methodology validation data
by: Berrington, R. E.
Published: (2000)

Development and evaluation of a wind tunnel manoeuvre rig
by: Pattinson, John
Published: (2010)

Automated reverse engineering of agent behaviors
by: Li, Wei
Published: (2016)

Coupled 1D-3D simulation of flow in subway transit networks
by: Prince, Justin
Published: (2015)

An experimental investigation of flow control for supersonic inlets
by: Titchener, Neil
Published: (2013)

Experimental investigation of flow separation at a swept edge
by: Rajasekar, Rajendran
Published: (2010)

Air and oil flow investigations in an aeroengine bearing chamber
by: Lee, Chan Wei
Published: (2004)

An Investigation of the Flow over a Wing-Body Combination
by: Naranjit, S.
Published: (1976)

In-cylinder flow and combustion studies in an air-assisted direct injection gasoline engine
by: Leach, Ben Thomas
Published: (2004)

Analysis of internal combustion engine in-cylinder flow using particle image velocimetry
by: Pommier, L. S.
Published: (1999)

Gas Flow Through an Engine Exhaust System Containing a Catalytic Converter
by: Orme, J. R.
Published: (1974)

Internal flow and spray characteristics of a swirl pressure atomiser for gasoline engines
by: Abo Serie, Essam Eldin Farid
Published: (2004)

Estimation of bluff body transient aerodynamic loads using an oscillating model rig
by: Mansor, Shuhaimi
Published: (2006)

Ride and handling assessment of vehicles using four-post rig testing and simulation
by: Bennett, L. J.
Published: (2012)

Development of a novel test rig for the evaluation of aircraft fuel tank sealants
by: Hooper, Mark Nicholas
Published: (2007)

Flow dynamics study of catalyst powder in catalytic cracking unit for troubleshooting
by: Yelgaonkar Vivek, et al.
Published: (2017-12-01)

Aircraft engine intake interaction with a cross flow
by: O'Brien, Mark
Published: (1996)

Investigations into the operational effectiveness of hybrid laminar flow control aircraft
by: Young, T. M.
Published: (2002)

Experimental investigations of the unsteady flow on diamond and lambda planform wings
by: Williams, C. B.
Published: (2001)

Investigation into the use of optic flow and CMAC network for robot balancing
by: Hernandez, Guillermina Claudia Martinez
Published: (2005)

Investigation of passive flow control in a cascadeless thrust reverser
by: Hall, S. L. R.
Published: (2006)

Numerical investigation into bio-inspired flow control for renewable turbine
by: Liu, Wendi
Published: (2015)

Development, modelling and control of a multi-degree-of-freedom dynamic wind tunnel rig
by: Davison, Paul M.
Published: (2003)

Numerical investigation of distance effect between two Searasers for hydrodynamic performance
by: Ali A. Babajani, et al.
Published: (2016-09-01)

Analysis of influence of using catalyst and polar additives on engine performance and exhaust emission
by: Marcin TKACZYK, et al.
Published: (2019-05-01)

Thrust and flow prediction in gas turbine engine indoor sea-level test cell facilities
by: Gullia, Alessandro
Published: (2006)

Water flow at the nanoscale : a computational molecular and fluid dynamcis investigation
by: Ritos, Konstantinos
Published: (2014)

Performance modelling of synthetic jet actuators for flow separation control
by: Tang, Hui
Published: (2006)

An investigation into the flow over a wing/fuselage junction
by: Abdulrazak, Dhia Jabar
Published: (1991)