The production of mouldings adhering closely to the cavity geometry

The production of mouldings adhering closely to the cavity geometry

Bibliographic Details
Main Author:	Patching, Michael
Published:	Brunel University 1994
Subjects:	670 Injection moulding
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.241575

Similar Items

Integrated analyses in plastics forming
by: Wang, Bo
Published: (1996)

Economic manufacture of freeze-cast ceramic substrate shapes for the spray-forming process
by: Statham, Michael J.
Published: (1998)

Comparison of injection moulding machine performance.
by: Kelly, Adrian L., et al.
Published: (2009)

Optimisation of Mould Design for Injection Moulding – Numerical Approach
by: Damir Godec*, et al.
Published: (2021-01-01)

Rheological and thermal analysis of the filling stage of injection moulding
by: A. Szucs, et al.
Published: (2012-08-01)

Processing and properties of moulded alumina bodies
by: Nogueira, Ricardo Emilio Ferreira Quevedo
Published: (1992)

Real-time diagnostics of gas/water assisted injection moulding using integrated ultrasonic sensors
by: Mulvaney-Johnson, Leigh, et al.
Published: (2008)

Visual analysis and diagnosis system for injection moulded components
by: Marsh, Robert
Published: (2002)

Powder injection moulding technology: Properties, possibilities and starting activities
by: Radulović Jovan
Published: (2015-01-01)

Rapid heating injection moulding: An experimental surface temperature study
by: R. Sánchez, et al.
Published: (2021-01-01)

The mould for production of plastic spout cap with internal thread by injection moulding
by: Bulej Vladimír, et al.
Published: (2018-01-01)

Development of binder systems based on CAB for powder injection moulding (PIM) and micro powder injection moulding (µ-PIM) of Zircon and Invar powders
by: Hidalgo Garcia, Javier
Published: (2014)

Adaptive process control for stabilizing the production process in injection moulding machines
by: Schiffers, Reinhard, et al.
Published: (2016)

Resin transfer moulding component design and manufacture
by: Abraham, David
Published: (1997)

A study of binder removal from powder injection moulded aluminium bodies
by: Pinwill, Ian E.
Published: (1990)

Additive Manufacturing of Polymer Moulds for Small-Batch Injection Moulding
by: Damir Godec*, et al.
Published: (2020-01-01)

High Temperature Adiabatic Heating in µ-IM Mould Cavities—A Case for Venting Design Solutions
by: Matthew Tucker, et al.
Published: (2020-03-01)

The challenges of titanium metal injection moulding
by: Benson, J.M., et al.
Published: (2015)

Influence of Mould Wall Temperature and Content of Recycled Material on Shrinkage of Polymeric Part
by: Matija Hržan, et al.
Published: (2019-01-01)

Utilization of Optimization of Internal Topology in Manufacturing of Injection Moulds by the DMLS Technology
by: Tomas Coranic, et al.
Published: (2021-12-01)

Investigation of the impact of conformal cooling on the performance of injection moulds for the packaging industry
by: Dimitrov, D., et al.
Published: (2015)

Examination of injection moulded thermoplastic maize starch
Published: (2007-12-01)

Design of the Optimal Geometry of the Moulded Piece Based on Numerical Analyses in Cadmould 3D-F
by: Paweł Mańko, et al.
Published: (2020-03-01)

Injection Mould Design and Analysis of the Telephone Base Based on Pro/E
by: Kong Wen, et al.
Published: (2015-01-01)

A critical review of literature on cooling of injection moulds
by: Ngonda, T.N.
Published: (2015)

The Use of Particulate Injection Moulding for Fabrication of Sports and Leisure Equipment from Titanium Metals
by: Paul D. Ewart
Published: (2018-02-01)

Use of a Holistic Design and Manufacturing Approach to Implement Optimized Additively Manufactured Mould Inserts for the Production of Injection-Moulded Thermoplastics
by: Loucas Papadakis, et al.
Published: (2020-10-01)

Effects of Mould Temperature on Rice Bran-Based Bioplastics Obtained by Injection Moulding
by: María Alonso-González, et al.
Published: (2021-01-01)

On the performance of a viscoelastic constitutive model for micro injection moulding simulations
by: G. Lucchetta, et al.
Published: (2012-05-01)

Development and characterisation of injection moulded, all-polypropylene composites
by: A. Kmetty, et al.
Published: (2013-02-01)

Microstructure of injection moulding machine mould clamping mechanism: design and motion simulation
by: Zhiming Jin, et al.
Published: (2019-03-01)

Determinant morphological features of flax plant products and their contribution in injection moulded composite reinforcement
by: Lucile Nuez, et al.
Published: (2020-11-01)

DEVELOPMENT OF SMALL INJECTION MOULDING MACHINE FOR FORMING SMALL PLASTIC ARTICLES FOR SMALL-SCALE INDUSTRIES
by: OYETUNJI, A.
Published: (2010-03-01)

ALGORITHMS FOR THE PROGRAMMING OF FOOTWEAR SOLES MOULDS ON WORKING POSTS OF INJECTION MACHINES
by: LUCA Cornelia, et al.
Published: (2014-05-01)

Micro-Injection Moulding In-Line Quality Assurance Based on Product and Process Fingerprints
by: Federico Baruffi, et al.
Published: (2018-06-01)

INFLUENCE OF REGRIND ON PROPERTIES OF PLASTICS PRODUCED BY INJECTION MOULDING
by: Ľudmila Dulebová, et al.
Published: (2011-07-01)

A MILP for multi-machine injection moulding sequencing in the scope of C2NET Project
by: Beatriz Andrés, et al.
Published: (2018-01-01)

Correlating nano-scale surface replication accuracy and cavity temperature in micro-injection moulding using in-line process control and high-speed thermal imaging
by: Baruffi, F., et al.
Published: (2019)

THE EFFECT OF MULTIPLE PROCESSING OF POLYPROPYLENE ON SELECTED PROPERTIES OF INJECTION MOULDED PARTS
by: Karolina Głogowska, et al.
Published: (2016-12-01)

An ANN-Based Temperature Controller for a Plastic Injection Moulding System
by: Maksym Khomenko, et al.
Published: (2019-11-01)

Cannot write session to /tmp/vufind_sessions/sess_omq72cv7qu4sa80cmt1pc6obuk