Design and analysis of taper-type locking assemblies

Design and analysis of taper-type locking assemblies

Bibliographic Details
Main Author:	Cook, Ian T.
Published:	University of Nottingham 1994
Subjects:	621.88 Compression couplings
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.239479

Similar Items

The design of the hollow-bore clevis-pin type of load cell
by: Piyasin, Surasith
Published: (2000)

Design and stress analysis of cast tubular joints
by: Edwards, C. D.
Published: (1983)

Characterisation and modelling of impact damage in bonded joints of woven fibre polymeric composites
by: Choudhry, Rizwan Saeed
Published: (2009)

Parameter estimation for real-time monitoring of threaded fastenings
by: Klingajay, Mongkorn
Published: (2005)

A non-welded stiffening method for end plate connections
by: Nip, Tak Fai
Published: (2002)

Design, development and assessment of an automated ultrasonic inspection system in production and experimental analysis if tubular butt welds for identification and characterisation of weld defect
by: Zia Tabari, M.
Published: (1986)

The effect of overlap on the stress distribution in K and KT type tubular joints
by: Little, W. J. G.
Published: (1982)

A design and performance prediction method for axial piston pumps with integral controls
by: Beswarick, William John
Published: (1978)

Analysis of flexible interlayers between metals and ceramics
by: Bond, Philip Harvey
Published: (1995)

Analysis of the influence of temperature on the performance of adhesively bonded single lap joints
by: Davies, Richard G. H.
Published: (2000)

Application of spate and finite element stress analysis methods to models of welded joints
by: Manteghi, S.
Published: (1991)

Non-linear analysis and testing of adhesive joints under impact and quasi-static loading
by: Harris, J. A.
Published: (1983)

Advanced fracture mechanics analysis of shallow surface cracks in fillet welded T-butt plate joints
by: Fu, Bin
Published: (1994)

Stress and failure analysis of curvic couplings
by: Richardson, Ian J.
Published: (1999)

The characterisation of adhesive joints found typically in the automotive industry
by: Grant, Lindsay D. R.
Published: (1994)

The ultimate load behaviour of stiffened web pannels
by: Tang, K. H.
Published: (1983)

Buckling behaviour of intermediately stiffened plate elements
by: Hoon, K. H.
Published: (1986)

The evolution of large scale structure after decoupling
by: Palmer, P. L.
Published: (1981)

Fatigue crack growth in a fillet welded joint
by: Smith, I. F. C.
Published: (1982)

Strength loss in welded aluminium structures
by: Robertson, I.
Published: (1985)

Residual stresses in welded tubular T-joints
by: Payne, J. G.
Published: (1986)

The prediction of the fatigue strength of bonded carbon fibre reinforced plastic joints
by: Martin, R. H.
Published: (1987)

Parametric study for non-destructive fatigue strength evaluation of offshore tubular welded joints
by: Chang, Enrong
Published: (1997)

The effect of residual stresses on the toughness of adhesive joints
by: Duer, Ross Howard
Published: (1997)

Identification of the dynamic characteristics of structural joints
by: Nobari, Ali Salehzadeh
Published: (1991)

A study of some parameters which influence the static and dynamic stiffness of joints in machine tool structures
by: Thornley, R. H.
Published: (1969)

Non-uniform elastic torsional behaviour of structural joints and frames
by: Tam, A.
Published: (1978)

Strength and deformation of structural concrete joints
by: Sarsam, Kaiss Fouad
Published: (1983)

Beam-column joints in reinforced concrete
by: Georgoussis, G. K.
Published: (1980)

An investigation of the factors influencing the distribution of splitting stress around tensile lapped splices
by: Jones, Keith G. Joes
Published: (1993)

Fatigue of dovetail joints
by: Chen, K. C.
Published: (1985)

Unwelded shear connectors in composite steel and concrete structures
by: El- Shihy, A. M.
Published: (1986)

Mathematical modelling of creep in weldments using the Cosserat theory of plates and shells
by: Newman, Michael Geoffery
Published: (1993)

The behaviour of bonded out-of-plane joints in fibre reinforced plastic structures
by: Hawkins, Guy Lawrence
Published: (1995)

Variable impedance journal bearings for rotor-bearing systems
by: Boroomand, Tirdad
Published: (1990)

The strength of adhesively bonded joints degraded by moisture
by: Hambly, H. O.
Published: (1998)

The effect of thickness on allowable defect sizes in fillet welded joints under fatigue loading
by: Ahmet, M. T.
Published: (1980)

Durability of structural adhesive joints
by: Hutchinson, Allan Robert
Published: (1986)

Behaviour of sleeved bolt connections in precast concrete building frames
by: Mohamed, Sherif Ali Mohtady
Published: (1992)

Static strength of tubular joints
by: Khalid, Yousif A.
Published: (1993)

Cannot write session to /tmp/vufind_sessions/sess_tnvvft7i6ri3e6nq29pfspoon7