The anodic behavior of aluminium alloys in alkaline electrolytes

The anodic behavior of aluminium alloys in alkaline electrolytes

Bibliographic Details
Main Author:	Hunter, John Anthony
Published:	University of Oxford 1989
Subjects:	541 Aluminium-air batteries
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.237870

Similar Items

A study of the anodic behaviour of aluminium alloys in alkaline electrolytes
by: Walters, B. N.
Published: (1988)

Aluminium alloys for battery anodes in alkaline systems
by: Dodson, Matthew William
Published: (1992)

Development of flexible textile aluminium-air battery prototype
by: Aleksandrs Vališevskis, et al.
Published: (2021-02-01)

Influence of the Anodic Oxidation Treatment on the Corrosion Behaviour of Aluminium and Aluminium Alloys
by: Valentin DUMITRAŞCU, et al.
Published: (2015-09-01)

The influence of pitch quality on anode carbon gasification
by: Hussain, Khadam
Published: (1994)

Electrodeposition of aluminium-titanium alloys from molten fluoride-oxide electrolytes
by: Omar Awayssa, et al.
Published: (2021-02-01)

CORROSION PROPERTIES OF SELECTED ALUMINIUM ALLOYS IN MODEL ELECTROLYTES
by: Petra Lacková, et al.
Published: (2014-06-01)

Corrosion Characteristics of Raw and Anodized Aluminium
by: Islamović, S., et al.
Published: (2013-07-01)

Preparation and electrochemical characterisation of aluminium liquid battery cells with two different electrolytes (NaCl-BaCl2-AlF3-NaF and LiF-AlF3-BaF2)
by: Miran Gaberšček, et al.
Published: (2015-08-01)

Effect of electrolyte temperature on the thickness of anodic aluminium oxide (AAO) layer
by: P. Michal, et al.
Published: (2016-07-01)

The growth mechanisms of anodic films on aluminium
by: Xu, Y.
Published: (1983)

Numerical Modeling and Analysis of the Performance of an Aluminum-Air Battery with Alkaline Electrolyte
by: Jiadong Xie, et al.
Published: (2020-06-01)

Novel solid electrolyte systems
by: Jelfs, A. M. P.
Published: (1987)

Anodic processes on aluminium
by: Salter, Victoria Clare
Published: (1995)

Characteristic of air pollutants arising in the aluminium scrap remelting technology
by: Edita Virčíková, et al.
Published: (2005-11-01)

Corrosion behaviour of 6063 aluminium alloy in acidic and in alkaline media
by: Prabhu Deepa, et al.
Published: (2017-05-01)

The Effect of Increasing the Amount of Indium Alloying Material on the Efficiency of Sacrificial Aluminium Anodes
by: Krzysztof Zakowski, et al.
Published: (2021-04-01)

A comparative study of leaves extracts for corrosion inhibition effect on aluminium alloy in alkaline medium
by: Namrata Chaubey, et al.
Published: (2017-12-01)

Assessment of air pollutants produced by industrial activity from an aluminium alloys foundry
by: D. Cirtina, et al.
Published: (2015-10-01)

Study and improvement of non-aqueous Lithium-Air batteries via the development of a silicon-based anode
by: Lepoivre, Florent
Published: (2016)

Structural, electrochemical and thermal studies of divalent polymer electrolytes
by: Sheldon, M. H.
Published: (1989)

Thermal Performance Analysis of Gradient Porosity Aluminium Foam Heat Sink for Air Cooling Battery Thermal Management System
by: Chen, J., et al.
Published: (2022)

The anodic behaviour of iron in alkaline solution
by: Baurhoo, I.
Published: (1973)

Streaking on aluminium alloy extrusions
by: Walker, Joshua Euan
Published: (2013)

RECYCLING AND PROPERTIES OF RECYCLED ALUMINIUM ALLOYS USED IN THE TRANSPORTATION INDUSTRY
by: Lenka KUCHARIKOVÁ, et al.
Published: (2016-06-01)

Low-Cost Nanostructured Coating of Anodic Aluminium Oxide Synthesized in Sulphuric Acid as Electrolyte
by: Florencia A. Bruera, et al.
Published: (2021-03-01)

Anodic behaviour at tin and aluminium electrodes
by: Stirrup, Barri N.
Published: (1976)

Ethylene Glycol/Ethanol Anolyte for High Capacity Alkaline Aluminum-Air Battery With Dual-Electrolyte Configuration
by: Tanawat Phusittananan, et al.
Published: (2020-07-01)

Mechanical Application of Lubricated Nano Porous Anodized Aluminium
by: Harleen Kaur, et al.
Published: (2017-10-01)

The anodic behaviour of aluminium alloys in alkaline solutions
by: McPhail, D. J.
Published: (2011)

Electrolytic Extraction of Aluminium Bifilms
by: Bergfors, Simon, et al.
Published: (2020)

Influence of Aluminium Alloy Anodizing and Casting Methods on Structure and Functional Properties
by: Konieczny J., et al.
Published: (2016-09-01)

Influence of the Heating Rate on the Foaming Behavior of Various Aluminium Alloys
by: Tillmann R. Neu, et al.
Published: (2017-08-01)

Weld Quality in Aluminium Alloys
by: Deekhunthod, Rujira Ninni
Published: (2014)

Behaviour of truck’s compressor’s connecting rods made of aluminium alloy under different manufacturing conditions
by: Rasa Kandrotaitė-Janutienė
Published: (2016-03-01)

Precipitation in aluminium based and iron based alloys
by: Hull, S.
Published: (1985)

Effect of preheating condition on strength of AA6060 Aluminium Alloy for extrusion
by: Meng, Cheng
Published: (2010)

The formation and sealing of porous anodic oxide films on aluminium
by: O'Sullivan, J. P.
Published: (1968)

INFLUENCE OF HEAT TREATMENT ON FATIGUE AND FRACTURE BEHAVIOR OF ALUMINIUM ALLOY
by: M. F. I. A. IMAM, et al.
Published: (2015-06-01)

Corrosion fatigue behaviour of 5083-H111 and 6061-T651 aluminium alloy welds
by: Mutombo, Faustin Kalenda
Published: (2013)

Cannot write session to /tmp/vufind_sessions/sess_pfut422k3di6hr1qjvhqu9t8qt