A study of the mechanics of the two thread chainstitch machine and the geometrical properties of the two thread chainstitch seam

A study of the mechanics of the two thread chainstitch machine and the geometrical properties of the two thread chainstitch seam

Bibliographic Details
Main Author:	Jones, Rowland R.
Published:	University of Leeds 1980
Subjects:	621.8 Sewing machine development
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.235670

Similar Items

Sewing machine, fabric and thread dynamics
by: Chmielowiec, Ryszard
Published: (1993)

Relative Performance of Lockstitch and Chainstitch at the Seat Seam of Military Trouser
by: Arunangshu Mukhopadhyay, Ph.D.
Published: (2008-03-01)

Tribological aspects of the self-loosening of threaded fasteners
by: Eccles, William
Published: (2010)

The strength of certain seams as influenced by stitch length, thread and fabric
by: Coon, Helen Beth.
Published: (2015)

Effect of stitch length and type of thread on the strength of seams in wool and wool-like fabrics
by: Kyle, Connie Rogene
Published: (2014)

Usage of Fusible Sewing Threads to Improve the Waterproof Property of Seam
by: Cansu MESEGUL, et al.
Published: (2020-08-01)

Response of two-dimensional piping systems during pipe whip
by: Wang, B.
Published: (1991)

Understanding the effect of skin mechanical properties on the friction of human finger-pads
by: Liu, Xiaoxiao
Published: (2013)

Numerical simulation of two-phase gas and non-Newtonian shear-thinning fluid flows in pipelines
by: Jia, Ninghong
Published: (2011)

Plastic injection moulding machine controllers
by: Farrar, P. T. K.
Published: (1987)

A generalised approach to machine control
by: Harrison, Robert
Published: (1991)

The normal dynamic characteristics of machine tool plain slideways
by: Dolbey, M. P.
Published: (1969)

MDI data preparation for numerically controlled milling machines
by: De Queiroz, Abelardo Alves
Published: (1983)

The influence of machine thermal design and operating conditions on scuffing failure
by: Finnis, Melanie P.
Published: (1989)

Investigation of novel variable flux reluctance machine characteristics
by: Liu, Xu
Published: (2013)

Development of a microprocessor-based signal analyser for machine condition monitoring
by: MacLean, Colin S.
Published: (1984)

An investigation of high speed and power permanent magnet synchronous machines
by: Mehna, Ali A. Ahmed Omran
Published: (2011)

Structure, mechanical and tribological properties of hydrogen-free amorphous carbon films deposited by dual-frequency mode pulsed-DC magnetron sputtering
by: Liu, Chang
Published: (2017)

Optimization of the parameters of the sewing thread cutting process
by: Yuri V Novikov, et al.
Published: (2020-06-01)

Investigation of the Effects of Elastic Sewing Thread on Seam Performance Properties of Stretch Denim Fabrics
by: Tiber, B., et al.
Published: (2022)

The interactive three dimensional computer aided design of industrial circular weft knitting machines
by: Simms, G. J.
Published: (1981)

Novel robust control of damping oscillations in power systems with multi-machine wind farms
by: Peng, Y.
Published: (2014)

Studies in and modelling of a multi-product manufacturing system to aid the selection and financial appraisal of advanced machine tools
by: Kilmartin, B. R.
Published: (1983)

Constraint analysis and theoretical development of multi-furcation and reconfiguration in mechanisms
by: Qin, Yun
Published: (2013)

Fracture mechanics of bi-material interfaces for composite pipe repair
by: Linden, Johannes Maximillian
Published: (2015)

Design and analysis of the SVOBODA mechanism as a hybrid machine
by: Greenough, Jeremy David
Published: (1996)

Strength prediction of mechanical joints in composite laminates based on subcritical damage modelling
by: Atas, Akin
Published: (2012)

Compaction simulator performance analysis
by: Okapala, Chukwuemeka J.
Published: (1997)

Wheel/rail contact tribology : characterising low adhesion mechanisms and friction management products
by: Buckley-Johnstone, Luke
Published: (2017)

Real-time dynamic substructuring for mechanical and aerospace applications : control techniques and experimental methods
by: Wallace, Max Ian
Published: (2005)

Fault diagnosis and condition monitoring for NC/CNC machine tools
by: Harris, C. G.
Published: (1987)

Control of machine drives for varying inertia systems
by: Kaipio, Tero
Published: (2000)

Studies in the excavation of selected rock materials with mechanical tools
by: Hekimoglu, Osman Zeki
Published: (1984)

A study of the microstructural and mechanical properties of novel spring steels
by: Harris-Pointer, Cheryl Faye
Published: (1998)

Computer aided design of feed drives for NC machine tools
by: Filiz, I. H.
Published: (1981)

Thermo-mechanical behaviour of heavy-duty disc brake systems
by: Chen, Jing Ping
Published: (2001)

The testing of asynchronous sequential machines
by: Woodward, A. T.
Published: (1985)

An investigation into below centre centreless grinding
by: Johnson, S. P.
Published: (1989)

The design of fixture supports to prevent surface attitude changes at the point of tool load
by: Nixon, James
Published: (1991)

A study of the influence of machining variations on the capability, selection and economic use of a group of machine tools
by: Marsh, R.
Published: (1982)

Cannot write session to /tmp/vufind_sessions/sess_qg2af7te1av54o8vjdepnmc58n