Failure mechanisms under complex loading of glass-reinforced polyester composites and their matrices : The effect of superposed hydrostatic pressures up to 300 MPa on axial tensile and compressive strengths, and in-plane shear properties of unidirectional

Failure mechanisms under complex loading of glass-reinforced polyester composites and their matrices : The effect of superposed hydrostatic pressures up to 300 MPa on axial tensile and compressive strengths, and in-plane shear properties of unidirectional

Bibliographic Details
Main Author:	Sigley, R. H.
Published:	University of Bradford 1988
Subjects:	668.4 Reinforced polyester strength
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.234245

Similar Items

Biaxial drawing of amorphous polymer films near the glass transition
by: Adams, A. M.
Published: (1995)

The basis of thermoforming poly (ethylene-terephthalate) containers
by: Ola, A. O.
Published: (1987)

Sustainability within the polyester value chain
by: Van Uytvanck, Pieterjan Paul
Published: (2015)

The mechanical properties of compression moulded glass reinforced polyester systems
by: Mowforth, E.
Published: (1971)

The crosslinking of polyesters : a study of network formation by physical methods
by: Pritchard, G.
Published: (1968)

Crosslinked polyesters : investigation of the structure of commercial polymers based on terephthalic acid
by: Kyriacos, Dimosthenis
Published: (1977)

The tensile deformation of oriented polyvinyl chloride and oriented polyethylene
by: Hargreaves, Edward
Published: (1970)

Volume changes accompanying tensile deformation of poly-methylmethacrylate
by: Nugent, H.
Published: (1976)

Processing and properties of polyester moulding compounds
by: Lamb, D. W.
Published: (1985)

Designing for strength and fatigue in polyester SMCs'
by: Tobias, A. M.
Published: (1984)

Cumulative fatigue and life prediction of unidirectionally reinforced 'E'-glass/epoxy composites
by: Barnard, P. M.
Published: (1986)

Interlaminar delamination in unidirectional carbon epoxy composites induced by static and fatigue loading
by: El-Senussi, A. K.
Published: (1986)

Compatibilisation of polysulphones/polyester blends
by: Martin, Lee
Published: (1994)

The structure and barrier properties of metallised polyester film
by: Jamieson, E. H. H.
Published: (1981)

Environmental sensitive cracking of a polyester resin
by: Nedjat-Hayem, F.
Published: (1983)

Analysis of the cure of polyester resins and sheet moulding compounds
by: Nixon, J. A.
Published: (1984)

A study of the flow properties and processability of thermoplastic polyesters
by: Axtell, Frederick H.
Published: (1987)

The structural use of hot press moulded glass reinforced polyester
by: Mallin, Graham Michael
Published: (1984)

Prediction of the rate of degradation of a polyester glass composite by water
by: Speake, Stephen David
Published: (1986)

Property-microstructural relationships in GFRP
by: Guild, Felicity Jean
Published: (1978)

Effect of phase separation in epoxy/PEI matrix on the mixed-mode I/II delamination behaviour of unidirectional glass fibre reinforced composites
by: Turmel, Denis Jean-Pierre
Published: (1995)

Composistion-morphology-mechanical property effects and the antishrink mechanism in low profile modified unsaturated polyester thermosetting resins
by: Phillips, M. J.
Published: (1991)

Aspects of the rheology of unsaturated polyester dough moulding compounds
by: Rides, M.
Published: (1993)

The effect of thermoplastic and thermosetting matrices on the delamination behaviour of filament wound tubes
by: Longmuir, Amanda Jane
Published: (1993)

Energy absorption and failure mechanisms of axially crushed G.R.P. tubes
by: Berry, J. P.
Published: (1983)

Structure-property relationships in reaction injection moulded polymers and polymer composites : Structure-property studies of reaction injection moulded polyurethanes, polyesters, polyacrylates and novel acrylic-urethane blends and of composites of these
by: Leadbitter, J.
Published: (1988)

Preferred fibre orientation in the injection moulding of polyester thermosets
by: Gibson, John Robert
Published: (1988)

Environmental creep mechanisms in glass/polyester composites
by: White, Roger John
Published: (1985)

Encapsulation of biocides in poly (vinyl chloride) and their ability to inhibit biofilm formation and biodegradation
by: Bayley, Kate
Published: (2006)

Synthesis and screening of biocompatible polymers using a multiparallel approach
by: Jose, Ann Jasmine
Published: (2005)

The synthesis and screening of polymer libraries using a high throughput approach
by: Mizomoto, Hitoshi
Published: (2004)

Morphology and properties of nylon 66 : effects of injection moulding on structure and performance
by: Jackson, Victor S.
Published: (1973)

Surface etching studies of highly drawn polyethylenes
by: Tissington, Bryan
Published: (1990)

Feedstock recycling of plastic waste by hydrocracking
by: Hernandez-Martinez, Jesus
Published: (2008)

Residual stresses in high density polyethylene pipes with particular reference to its effects on soil-pipe interaction
by: Choollun, Virendra Kumar
Published: (2008)

Investigation into the colouration of polypropylene
by: Zeng, Fuquan
Published: (2002)

Preparative analytical and physiochemical studies of urea- formaldehyde resins and foam insulants
by: Taylor, R.
Published: (1982)

The time-dependant behaviour of anisotropic low density polyethylene
by: Clayton, D.
Published: (1971)

The effect of molecular architecture on the deformation behaviour of drawn bimodal polyethylene
by: Van den fonteyne, Winke Heidi Werner
Published: (2016)

Characterisation of fluoropolymers modified chemically and morphologically using rigid polyimides
by: Turland, Darryl Alfred
Published: (2012)