The fluid mechanics of filters

The fluid mechanics of filters

Bibliographic Details
Main Author:	Hildyard, M. L.
Published:	University of Leeds 1988
Subjects:	621.69 Flow through filters
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.233871

Similar Items

Fluid flow and particle deposition on filter media
by: Griffiths, P. V. R.
Published: (1973)

Mathematical modelling of anaerobic filters
by: Cheng, C. Y.
Published: (1980)

Investigation of the flow in an idealised inlet port/poppet valve assembly
by: Ahmed, Ashraf Mohamed Yossri
Published: (1986)

Development of knitted structures for dust filtration
by: Lawton, Philip John
Published: (1992)

The vibratory cleaning of flat geometry dust filters
by: Morris, Keith
Published: (1981)

Development of electromagnetic fluid disc valves
by: Sun, Yongbin
Published: (1993)

Stability studies on heat pump working fluids
by: Srinivasan, P.
Published: (1984)

Upflow and downflow biological aerated filters (BAFs) for wastewater treatment
by: Mendoza Espinosa, Leopoldo Guillermo
Published: (1999)

The behaviour of electrically active and prefilter fibrous filters under solid aerosol load
by: Walsh, Declan Christopher
Published: (1995)

LDA investigation of flow in a stable mixed-flow pump model
by: Shamsolahi, S.
Published: (1987)

On the structural mechanics of multi-layered subsea pipelines
by: Silva, Renato Marques Correa da
Published: (1998)

The mechanical behaviour and fatigue analysis of flexible pipes
by: Chen, Zhenxin
Published: (1990)

Rapid crack propagation in polyethylene gas pipes
by: Yayla, Pasa
Published: (1991)

An assessment of the performance of high density polyethylene copolymers for natural gas distribution pipes
by: McNally, Paul F.
Published: (1980)

Fluid/structure interaction in dynamic crack propagation problems
by: Caldis, E. S.
Published: (1982)

Effects of condensation on steam-water, counter-current flooding in a vertical tube
by: Ahmed Husham Mahmood, H. M.
Published: (1988)

Scaling and performance comparisons of a centrifugal pump with hydrodynamic disc seals running in water and mercury
by: Merry, S. L.
Published: (1982)

Behaviour of cylindrical shell with longitudinal plate bracket attachment
by: Tan, A. L.
Published: (1976)

Strength and flexibility of glass reinforced plastic pipes and pipe bends
by: Tan, A. L.
Published: (1983)

Creep of pipe bends with end constraints
by: Chan, C. K. L.
Published: (1984)

Flow in pipe fittings at low Reynolds numbers : an experimental study at head losses for the flow of Newtonian and non-Newtonian liquids through a variety of pipe-fittings
by: Jadallah, M. S. M.
Published: (1980)

An investigation into squeez-film dampers
by: Dede, M. M.
Published: (1981)

Hydrostatic extrusion of tubes
by: Marques, M. J. M. B.
Published: (1980)

The performance and control of fluidic diode pumps
by: Malekottodjari, M.
Published: (1984)

The flow of cement pastes and mortars in a pipeline
by: Sakuta, M.
Published: (1981)

Condensing annular flow inside tubes
by: Emilio Guevara, M.
Published: (1980)

'Valve stroking' with separated flow
by: Driels, M. R.
Published: (1973)

Surge prediction in multistage axial and centrifugal compressors
by: Gill, M. E.
Published: (1986)

An experimental and numerical study of plug formation in vertical pipes during cryogenic pipe freezing
by: Burton, M. J.
Published: (1986)

Steam compression in the single screw compressor
by: Yell, M. D.
Published: (1986)

Leak detection and condition monitoring of process valves by vibration analysis as a basis for condition based maintenance
by: Zolkiewski, G. M.
Published: (1990)

Static and dynamic analysis of marine pipelines and risers
by: Shanks, J. M.
Published: (1985)

Performance of small centrifugal pumps with water and mixed polar liquids
by: Chalaby, A. A. M.
Published: (1983)

The transient analysis of pipe networks transporting highly volatile liquids
by: McGarry, M. P.
Published: (1983)

Performance analysis and design of diode pumps
by: Thomas, M. D. H.
Published: (1984)

Design of fibre composite structures for large water valves
by: Bizzari, F. M. H.
Published: (1980)

The modelling of pump performance in two-phase flow
by: Homer, C. J.
Published: (1986)

Application of recess vaned casing treatment to axial flow compressors
by: Azimian, A. R.
Published: (1987)

The experimental investigation and analysis of the dynamic behaviour of a cylindrical vessel with a torispherical head empty and partially filled with fluid
by: Villanueva, C.
Published: (1985)

The influence of the accumulation of deformation on the failure of polyethylene pipe materials
by: Ward, Andrew L.
Published: (1994)

Cannot write session to /tmp/vufind_sessions/sess_44gam2vjlbktcd3a0o9rgnan4n