The prediction of temperature distribution in air cooled diesel engine cylinder heads

The prediction of temperature distribution in air cooled diesel engine cylinder heads

Bibliographic Details
Main Author:	Lawrence, N.
Published:	University of Brighton 1988
Subjects:	621.43 Heat transfer in engines
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.233062

Similar Items

Stress analysis of cylinder heads for medium speed diesel engines under conditions of mechanical and thermal load
by: Lawton, Bryan
Published: (1970)

Prediction of flow in diesel engine cylinders
by: Johns, R. J. R.
Published: (1980)

Cylinder-air motion and its effect on engine performance
by: Ibrahim, H. J. S.
Published: (1975)

Experimental and computational analysis of oil flow in cooling galleries of diesel engine pistons
by: Lahr, Jens
Published: (2016)

The detection of adhesive wear on cylinder liners for slow speed diesel engine through tribology, temperature, eddy current and acoustic emission measurement and analysis
by: Alam, Akm Khorshed
Published: (2014)

Air motion in a four-stroke direct-injection diesel engine
by: Derham, John A.
Published: (1972)

Computer analysis of multi-cylinder diesel engine mechanism dynamics
by: Deravi, P.
Published: (1980)

CFD investigation of a switched vortex valve for cooling air flow modulation in aero-engine
by: Koli, Bharat R.
Published: (2016)

Prediction of air mass flowrate in turbocharged four-stroke diesel engines
by: Smith, Leslie Arthur
Published: (1990)

Computational modelling of diesel engine smoke emission
by: Welch, S.
Published: (1995)

The economics of large diesel engines for electricity supply
by: Wills, R. J.
Published: (1991)

Simulation of diesel engine air flow
by: Kibble, G.
Published: (1970)

Heat transfer in a motored reciprocating engine
by: Al-Sudani, A.
Published: (1985)

The transient response of diesel engine and turbo-machinery combinations
by: Hargreaves, M. R. O.
Published: (1975)

The modelling and structural design of a diesel engine cylinder block
by: Mason, Timothy Paul
Published: (1989)

Total pressure loss mechanism in a diesel engine turbocharger
by: Gong, Xiaoyang
Published: (2016)

Torsional vibration-based monitoring of medium-speed diesel engines
by: Charles, Peter
Published: (2009)

Bore polishing of diesel engine cylinder liners
by: Al-Khalidi, Ghazi
Published: (1987)

Characterisation of flow structures inside an engine cylinder under steady state condition
by: Binjuwair, Saud
Published: (2013)

Stiffness and strength of a V-type diesel engine crank case
by: Whitehead, Philip Steven
Published: (1978)

Prediction of heat flow, temperature and stress in diesel engine pistons incorporating thermal barriers
by: Kao, Tseng-Kuan
Published: (1982)

Ultrasonic measurement of lubricant films generated at the piston-cylinder interface of internal combustion engines
by: Mills, Robin
Published: (2012)

The discharge process in a two-stroke cycle engine cylinder and exhaust system : collected papers
by: Benson, Rowland Cyril Judah Seider
Published: (1959)

The impact of piston design on cool start emissions from a modern direct injection diesel engine with the emphasis upon particulates and hydrocarbons
by: Blackwood, A. G. L.
Published: (1999)

Digital simulation of turbocharged diesel engine with air injection into the compressor
by: Furukawa, H.
Published: (1972)

A study of air motion and combustion in the IDI diesel engine
by: Somerville, Berard
Published: (1993)

A parametric study of combustion system design for a light duty diesel engine
by: Higginson, Steven
Published: (2014)

A combustion study of a supercharged high speed two-stroke diesel engine
by: Greeves, Godfrey
Published: (1969)

Identification of acoustic emission sources in machinery : application to injection/combustion processes in diesel engines
by: Abdou, Wael Saber Soliman
Published: (2015)

Convective and radiative heat transfer in a high-swirl direct-injection diesel engine
by: Sulaiman, Saadoun J.
Published: (1976)

Measurement of chemical species distribution by sampling from a diesel combustion chamber
by: Aziz, Azhar Abdul
Published: (1999)

Observation and measurement of fuel distribution within an S1 engine cylinder
by: Queenan, Kathleen Bernadette
Published: (1998)

Swirl calculations in direct injection four-stroke diesel engines fitted with directional inlet ports
by: Gorrell, A.
Published: (1977)

Three-dimensional flow predictions in motored diesel engines
by: Begleris, Philippos
Published: (1986)

CFD Predictions of Gas Turbine Full-Coverage Film Cooling
by: Yusop, Nadiahnor Md
Published: (2007)

Inlet port design and air motion in direct injection diesel engines
by: Sohrabi, A. A.
Published: (1980)

Investigation into the effect of the thermal management system of a diesel engine on the rate of heat transfer through the combustion chamber
by: Lewis, Andrew
Published: (2014)

The use of inlet valve control and air heating for reducing diesel engine noise
by: Kwan, E. K. M.
Published: (1989)

Implementation of engine cycle simulation in the function development for modern electronic diesel control and its application on adaptive balancing control
by: Munzenmay, Micha
Published: (2007)

Finite element modelling and dynamic substructuring for prediction of diesel engine vibration
by: Turner, G. L.
Published: (1983)