Cast turbine wheel failures

Cast turbine wheel failures

Bibliographic Details
Main Author:	Menning, John Edward
Language:	en_US
Published:	The University of Arizona. 1980
Subjects:	Nickel-chromium-aluminum alloys > Fatigue > Mathematical models.
Online Access:	http://hdl.handle.net/10150/557577

Similar Items

The fatigue and tensile properties of A356 aluminium alloy wheels in various post cast conditions
by: Jacobs, H.
Published: (2008)

An Investigation on Metallic Ion Release from Four Dental Casting Alloys
by: F. Nejatidanesh, et al.
Published: (2005-12-01)

Microstructure of Cast Ni-Cr-Al-C Alloy
by: Cios G., et al.
Published: (2015-04-01)

Oxidation and carburization of Fe-Cr and Ni-Cr alloys at 850 and 950̊C in CO/CO2 gas
by: Colwell, Jeffrey Alan
Published: (1979)

An Investigation on Metallic Ion Release from Four Dental Casting Alloys
by: F. Nejatidanesh, et al.
Published: (2005-12-01)

Estudo e caracterizacao das ligas FeNi e NiCr(80-20) por cento em peso, durante e apos irradiacao neutronica pelo metodo de resistividade
by: OTERO, MAURO P.
Published: (1978)

Estudo e caracterizacao das ligas FeNi e NiCr(80-20) por cento em peso, durante e apos irradiacao neutronica pelo metodo de resistividade
by: OTERO, MAURO P.
Published: (1978)

The Development, Characterization and Testing of Mg-rich Primers
by: Battocchi, Dante
Published: (2017)

Investigating the effect of heat treatment on the fatigue behavior of casting aluminum bronze containing nickel, iron and manganese
by: H. Jafari
Published: (2007-03-01)

Investigating the effect of heat treatment on the fatigue behavior of casting aluminum bronze containing nickel, iron and manganese
by: H. Jafari
Published: (2007-03-01)

An investigation of bond formation between alumina single crystals and nickel alloys
by: Clarke, John Frank
Published: (2012)

The effect of intermediate thermomechanical treatments on the fatigue properties of two 7XXX aluminum alloys
by: Sanders, Robert Edward
Published: (2006)

Anodic polarization behaviour of nickel-chromium alloys in sulfuric acid solutions /
by: Myers, James Russell
Published: (1964)

Evaluation of Adsorption Mechanism of Chromium(VI) Ion Using Ni-Al Type and Ni-Al-Zr Type Hydroxides
by: Fumihiko Ogata, et al.
Published: (2021-02-01)

Comparison of the Effect of Nd:YAG Laser and Sandblasting on Shear Bond Strength of a Commercial Ni-Cr Alloy to Porcelain
by: Elnaz Moslehifard, et al.
Published: (2016-09-01)

The effect of zirconium on the low cycle fatigue behavior of an aluminum-zinc-magnesium alloy
by: Sanders, Robert Edward
Published: (2006)

Aspekte van die magnetiese gedrag van binêre en ternêre Cr-allooie
by: Smit, Petrus
Published: (2014)

Corrosion Behavior of a Nickel-Base Dental Casting Alloy in Artificial Saliva Studied by Weight Loss and Polarization Techniques
by: Elnaz Moslehifard, et al.
Published: (2019-01-01)

A study of fatigue and corrosion fatigue for 24ST aluminum alloy sheet
by: Cliett, Charles Buren
Published: (2006)

Low cycle corrosion fatigue and corrosion fatigue crack propagation of high strength 7000-type aluminum alloys
by: Lin, Fu-Shiong
Published: (2006)

An examination of factors that affect transverse properties of aluminum-boron composites
by: Kietzman, Robert Charles, 1926-
Published: (1972)

Friction stir processing parameters and property distributions in cast nickel aluminum bronze
by: Rosemark, Brian P.
Published: (2012)

The effect of microstructure on the fatigue behavior of an aluminum-lithium alloy
by: Coyne, Edward James
Published: (2006)

Characterization of fatigue crack propagation in Al-Li 2090 alloys
by: Jung, Hie-young
Published: (2008)

Cavity formation during creep of an AL-MG-AG alloy
by: Goodson, Roshea Elizabeth
Published: (2006)

A study of the effect of thickness on fatigue strength of 24S-T3 aluminum alloy sheet
by: Duchacek, Howard
Published: (2006)

Probabilistic fatigue crack life prediction in a directionally-solidified nickel superalloy
by: Highsmith, Shelby, Jr.
Published: (2005)

The effect of an intermediate thermomechanical treatment on the fatigue properties of I/M X7091 aluminum alloy
by: Chang, Hao
Published: (2006)

The effects of recrystallization textures on the mechanical properties of a high strength P/M aluminum alloy, X7091
by: Kuo, Victor Wei-Chung
Published: (2006)

The influence of grain structure, testing temperature and environment on the monotonic and low cycle fatigue behavior of a high strength aluminum-copper-lithium alloy
by: Tirumalai, Srivatsan Srinivas
Published: (2007)

A study of the low cycle fatigue properties of 7475 Al-alloys under two different aging conditions
by: Awad, Jamal Ibrahim
Published: (2008)

Fatigue crack closure and closure development in a high strength aluminium alloy
by: Garz, Reiner Ernst
Published: (2015)

An investigation of the effect of surface finish on the flexure fatigue strength of 75S-T6 aluminum alloy sheet
by: Bodiford, Robert Graham
Published: (2006)

Fatigue studies of 24S-T and 24S-T alclad sheet with various surface conditions
by: Bond, Aleck Constantine
Published: (2006)

Development of nickel aluminide (NiAl) microchannel array devices for high-temperature applications
by: Kanlayasiri, Kannachai
Published: (2012)

INFLUENCE OF NICKEL ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ALUMINUM COPPER ALLOY
by: Vu Anh Tuan, et al.
Published: (2019-03-01)

Modeling of thermal and mechanical effects during friction stir processing of nickel-aluminum bronze
by: Jamison, Jay Dee
Published: (2012)

High temperature monotonic and cyclic deformation in a directionally solidified nickel-base superalloy
by: Huron, Eric S.
Published: (2007)

Mechanical properties of metal-ceramic systems from nickel-chromium and cobalt-chromium alloys
by: Mirković Nemanja
Published: (2007-01-01)

Effect of recasting on the elastic modulus of metal-ceramic systems from nickel-chromium and cobalt-chromium alloys
by: Mirković Nemanja
Published: (2007-01-01)

Cannot write session to /tmp/vufind_sessions/sess_q711d958m4vo646h88rqmqntoc