| Summary: | Mechanical circulatory support (MCS) is a viable therapy for end stage heart failure. However, despite clinical success, the ability to compare MCS devices in vitro and perform training scenarios is extremely limited. Comparative studies are limited as different devices cannot be interchanged in a patient due to the surgical nature of implant. Further, training and failure scenarios cannot be performed on patients with devices as this would subject a patient to a failure mode. A need exists for a readily available mock system that can perform comparative testing and training scenarios with MCS devices. Previously, our group has fabricated a well characterized mock circulation system consisting of a SynCardia temporary Total Artificial Heart (TAH) and Donovan Mock Circulation tank (DMC tank). Further, utilizing this system with the TAH operating in reduced output mode, a heart failure model was developed. In the present study, three ventricular assist devices (VADs) were independently attached to the heart failure model to compare device performances over a range of preloads and afterloads. In addition, specific clinical scenarios were created with the system to analyze how VAD-displayed waveforms from the system correlate with clinical scenarios. Finally, each VAD was powered off while attached to the heart failure model to compare fluid flow through the VAD in a pump-failure scenario. We demonstrated that this system can successfully be utilized to compare MCS devices (i.e. ventricular assist devices) and for successful training of patients and clinicians.
|
|---|
