Investigation of the shear zone as basic parameter in chip formation

Investigation of the shear zone as basic parameter in chip formation

Bibliographic Details
Main Author:	Schuld, Eric Peter, 1937-
Language:	en_US
Published:	The University of Arizona. 1961
Subjects:	Metal-cutting. Steel > Metallography.
Online Access:	http://hdl.handle.net/10150/551514

Similar Items

Gefüge und Eigenschaften des warmfesten Chromstahls P91
by: Kohlar, Stefanie
Published: (2017)

Weld metal microstructures of molybdenum bearing structural steels
by: Dunne, Derek Joseph
Published: (1990)

The Influence of Electric Discharge Energy and Conditions of its Flow on the Geometrical Parameters of a Single Well and Microhardness of its Surface Layer
by: Mikhail G. Kiselev, et al.
Published: (2018-03-01)

Grain growth in alpha brasses
by: Kirby, Robert Francis, 1938-
Published: (1965)

Estudo de danos de radiacao de um aco inoxidavel austenico tipo AISI 321 com adicoes de Nb submetidos a tratamentos termicos, mecanicos...rapidos
by: CAMARGO, MARCOS U. de C. e
Published: (1979)

Estudo de danos de radiacao de um aco inoxidavel austenico tipo AISI 321 com adicoes de Nb submetidos a tratamentos termicos, mecanicos...rapidos
by: CAMARGO, MARCOS U. de C. e
Published: (1979)

Microstructural development in flip-chip solder bonds
by: Mockler, Alan John
Published: (1994)

Workpiece steels protecting cutting tools from wear : A study of the effects of alloying elements on material transfer and coating damage mechanisms
by: Aiso, Toshiharu
Published: (2016)

Effect of stacking fault energy on texture transition in alpha brasses
by: Valenzuela, Carlos G., 1934-
Published: (1965)

Optimization of resistance spot welding parameters for microalloyed steel sheets
by: Viňáš Ján, et al.
Published: (2016-11-01)

The effect of strain hardening and friction on the formation of the built-up edge in orthognal machining
by: Bryant, Gordon Stanton
Published: (2008)

Dernières avancées des études sur la production, la circulation et la datation des métaux ferreux archéologiques
by: Philippe Dillmann, et al.
Published: (2015-01-01)

Notch aspects of RSP steel microstructure
by: Michal Černý, et al.
Published: (2012-01-01)

Slip-line field solution with dead zone for large negative rake cutting
by: Abebe, Minasse, 1949-
Published: (2011)

Effect of deformation on the [gamma] to [alpha] transformation in three microalloyed steels
by: Essadiqi, E.
Published: (1986)

Diffusion of foreign atoms in otherwise pure metals; diffusion of mercury in single crystals of copper
by: Sommerfield, Richard Ralph, 1937-
Published: (1962)

The characterisation and modelling of multipass steel weld heat-affected zones
by: Reed, Roger Charles
Published: (1990)

Influence of the Cutting Parameters on Vibration Level in Metal Turning
by: Korka Zoltan Iosif, et al.
Published: (2014-06-01)

Modelling of grain boundary segregation, precipitation and precipitate-free zones of high strength aluminium alloys
by: Jiang, Hong
Published: (1994)

Production, characterization and testing of Tempered Martensite Assisted Steels (TMAS) obtained via subcritical annealing of cold rolled TRIP steels
by: Jayaraman, Vikram.
Published: (2007)

Some aspects of hydrogen-induced cracking in simulated weld heat-affected zones of a HSLA steel
by: Whitaker, J. S.
Published: (1983)

The formation and oxidation of iron-sulphur compounds
by: Steele, A. D.
Published: (1981)

The formation of interfaces between dissimilar FCC metals
by: Maheswaran, P.
Published: (1982)

Compositional convection and freckle formation in the solidification of binary alloys
by: Emms, Paul William
Published: (1993)

Aspects of channel segregate formation in cast steel rolls
by: Bridge, M. R.
Published: (1982)

The formation of γ' phase in directionally solidified in 738 alloy
by: Rosenthal, Ruben
Published: (1983)

The mechanisms of the formation and reversion of martensite in austenitic stainless steels
by: Guy, K. B.
Published: (1981)

INVESTIGATION OF CUTTING FORCE IN HARDENED STEEL TURNING
by: Mr. Alexander I. Pronin, et al.
Published: (2016-12-01)

Development and research of vacuum-plasma composite coatings for increase of operability of shearing dies
by: Volosova Marina A., et al.
Published: (2016-01-01)

Organic film formation on mild steel and platinum by the electro-oxidation of meta phenylenediamine
by: Underwood, T. C.
Published: (1977)

The formation of Alâ†2Oâ†3/Al composites by directed oxidation of Al
by: Xiao, Ping
Published: (1992)

The influence of process parameters and heat treatment on the microstructure and properties of electrodeposited chromium nickel iron coatings
by: Wang, Xu
Published: (1996)

Plastic Deformation Zone in Electromagnetic Cutting
by: Zimniak Z.
Published: (2017-12-01)

An investigation into the machinability of high strength steels
by: Ellis, J.
Published: (1972)

Investigation of the behaviour of scratched metal electrodes
by: Misra, R. D. K.
Published: (1983)

Investigation of rolling variables on the structure of steel
by: Ekebuisi, Godwyn O.
Published: (1984)

Investigations of the structure of hot deformed aluminium
by: Dadson, A. B. C.
Published: (1982)

Fissure and chevron crack formation in SD2-3% nickel steel submerged arc weld deposits
by: McFarland, K. W.
Published: (1986)

An investigation of metal-cutting dynamics /
by: Brown, Robert Alan
Published: (1962)

An investigation of the encapsulation process for machining turbine blades
by: Hayward, H. T.
Published: (1983)